Selecione seu país

Ir para o site global

  1. country
  2. Produtos
  3. Hazardous Area Products and Solutions
  4. Barreiras de segurança intrínseca
  5. K-System (DIN rail mounting)
  6. KFD2-HLC-Ex1.D

KFD2-HLC-Ex1.D HART Loop Converter

Principais benefícios

  • 1-channel isolated barrier
  • 24 V DC supply (Power Rail)
  • HART field device input with transmitter power supply
  • Usable as signal splitter (1 input and several outputs)
  • 3 analog outputs 4 mA ... 20 mA
  • Sink and source mode output
  • Configurable by keypad

Mostrar mais

Fale conosco para obter a estimativa exata da entrega.
Tipo preferencial
Product photo: HART Loop Converter KFD2-HLC-Ex1.D
Wiring Diagram: HART Loop Converter KFD2-HLC-Ex1.D
Product photo: HART Loop Converter KFD2-HLC-Ex1.D
Wiring Diagram: HART Loop Converter KFD2-HLC-Ex1.D
Approval
HART® interface
Product Compliance: Europe – CE
Approval
Approval
Nota

Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.

DE
  • DE
  • EN
  • ES
  • FR
  • PL
Folha de dadosFunçãoClassificaçãoInformative LiteratureProduct DocumentationDesign / SimulationCertificaçõesSoftwareProdutos relacionados

Dados técnicos de KFD2-HLC-Ex1.D

Signal typeAnalog input
ConnectionPower Rail or terminals 23+, 24-
Rated voltageUr19 ... 30 V DC
Rated currentIrapprox. 120 mA at 24 V DC
Power dissipation2.3 W
Power consumption2.9 W
ConformityHART field device input (revision 5 to 7)
Programming interfaceprogramming socket
Connection sidefield side
Connectionterminals 1, 2, 3, 4, 5, 6
Open circuit voltage/short-circuit currenttyp. 24 V / 28 mA
Input resistance250 Ω , 5 % (terminals 2, 3 and with jumper on 5, 6)
Available voltage≥ 15.5 V at 20 mA, short-circuit protected
Connection sidecontrol side
Connectionoutput I: terminals 7, 8, 9 , output II: terminals 13, 14, 15 , output III: terminals 19, 20, 21
Output signalanalog
Voltage range5 ... 30 V , sink mode from external supply
Current range4 ... 20 mA , (source or sink mode)
Loadmax. 650 Ω , source mode
Fault signaldownscale I ≤ 2 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43) or hold measurement value
Other outputsHART communicator on terminals 22, 24
Collective error messagePower Rail and LED red
Output I, II, III
Resolutionmax. 2 µA
Accuracy< 20 µA, 10 µA typ.
Influence of ambient temperature< ± 2 µA/K
Duration of measurement/Response delayHART message acquisition time plus 100 ms
Output I/II/III/power supplyfunctional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Display elementsLEDs , display
Control elementsControl panel
Configurationvia operating buttons
via PACTware
Labelingspace for labeling at the front
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EUEN 61010-1:2010
Electromagnetic compatibilityNE 21:2006
Degree of protectionIEC 60529:2001
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Degree of protectionIP20
Connectionscrew terminals
Mass300 g
Dimensions40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Height119 mm
Width40 mm
Depth115 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
EU-type examination certificateBASEEFA 07 ATEX 0174
MarkingEx-Hexagon II (1)G [Ex ia Ga] IIC
[exsign] II (1)D [Ex ia Da] IIIC
Supply
Maximum safe voltageUm253 V AC (Attention! The rated voltage can be lower.)
Equipmentterminals 1, 4/3 (with link between terminals 4 and 5)
VoltageUo25.2 V
CurrentIo104.9 mA
PowerPo0.661 W
Internal capacitanceCi1.1 nF
Internal inductanceLi0 mH
Equipmentterminals 2, 5/3
VoltageUi< 28 V
PowerPi< 1.33 W
VoltageUo1.1 V
CurrentIo11.9 mA
PowerPo4 mW
Internal capacitanceCi0 µF
Internal inductanceLi0 mH
Output I, II, IIIterminals 7, 8, 9; 13, 14, 15; 19, 20, 21 non-intrinsically safe
Maximum safe voltageUm253 V (Attention! Um is no rated voltage.)
CertificatePF 07 CERT 1142 X
MarkingEx-Hexagon II 3G Ex nA IIC T4 Gc
Galvanic isolation
Input/Other circuitssafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
FM approval
Control drawing116-0129
IECEx approval
IECEx certificateIECEx BAS 07.0047
IECEx marking[Ex ia Ga] IIC , [Ex ia Da] IIIC
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Notas de gênero

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Privacy Policy