Atendimento ao Cliente da Divisão de Sensores Industriais
Serviço de Atendimento ao Cliente
Rede de Atendimento - Divisão de Proteção Contra Explosão
Serviço de Atendimento ao Cliente

Temperature Converter KFD2-GUT Detects Limit Values

Monitoring of Coolant Pumps for Safe Operation in the Process Industry

The Application

Numerous process engineering plants require the process medium to be cooled in a targeted way. Coolants are used for this, which have a different viscosity depending on the temperature. If foreign matter has entered the cooling system or if the temperature and therefore the viscosity of the coolant are too high, the coolant pump may fail.

This results in the required performance of the cooling circuit declining. This in turn can have unforeseen consequences for the ongoing process and the process plant. Depending on the process, there may also be an immediate danger to people and the surrounding area. 


The Goal

Electrical drives are usually monitored by measuring the temperature of the stator, bearings, and surfaces. An increase in temperature in these areas of a motor indicates problems concerning field current, lubricant pressure, and drive cooling, for example.

Normally, the temperature sensors in the stator are securely encapsulated with the stator winding. Since they are subjected to high mechanical loads in this location, they are designed redundantly to ensure that the temperature is measured correctly even if a sensor fails. If certain limit values are reached or exceeded, precisely defined processes must be triggered to react to the situation in a targeted way. In the simplest case, the respective drive is just switched off. 


The Solution

Temperature Converter KFD2-GUT
Temperature Converter KFD2-GUT

An optimal component for the continuous monitoring of coolant drives is the temperature converter KFD2-GUT with trip relay from Pepperl+Fuchs. It is suitable for applications where the requirements of functional safety up to SIL 2 must be met. Two individually configurable relay outputs allow the precise definition of temperature limit values and provide a corresponding switching signal when these values are reached. The temperature converter is therefore ideal as a safety component that enables previously defined measures to be triggered to eliminate extensive damage as a result of a cooling circuit failing.


The Advantages

The trip amplifier is galvanically isolated and offers two independent switch points for temperature probes, thermocouples, and voltage and potentiometer signals. The primary function of the amplifier is to convert the signal into a proportional output current. The trip point, hysteresis, and high and low level alarm can be configured via a PC. The component provides the required isolation and a simple logical function for limit values. The KFD2-GUT is available as a signal conditioner for safe areas and as a version for intrinsically safe signals.


At a Glance

  • The failure of a coolant pump can risk the entire process and result in significant consequential damage
  • To monitor the drive, temperatures are measured at different points of the pump
  • If predefined limit values are reached, defined problemsolving processes and/or processes to shut down the pump can be triggered
  • The temperature converter with trip relay KFD2-GUT is ideal for applications up to SIL 2 and has two configurable relay outputs for activating different actions if the drive overheats

e-news

Fique por dentro de novidades e informações relevantes sobre a automação.

Clique aqui!
amplify – A Revista da Pepperl+Fuchs

Explore a nossa revista digital! Cases de sucesso, relatórios de aplicação, entrevistas e novidades esperam por você.

Hub de Segurança Funcional da Pepperl+Fuchs

Centenas de produtos com SIL/PL, ferramentas gratuitas e documentos em um só lugar. Acesse e saiba mais!

undefined

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies

We value your privacy!

Please select the group of cookies and scripts, that you consent to.

Functional
These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics
We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing
These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.