Switch Amplifier HiC2851

1-channel isolated barrier
24 V DC supply (bus powered)
Input for approved dry contacts or SN/S1N sensors
Active voltage output
Passive transistor output (resistive acc. to EN 60947-5-6)
Line fault transparency (LFT)
Up to SIL3 acc. to IEC 61508

Folha de Dados
Product Documentation
Design / Simulation
Approvals

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do HiC2851

General specifications
Signal type		Digital Input
Supply
Connection		SL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage		19 ... 30 V DC
Ripple		≤ 10 %
Rated current		≤ 55 mA
Power dissipation		≤ 800 mW
Power consumption		≤ 1300 mW
Input
Connection		SL2: 5a(+), 5b(-)
Open circuit voltage/short-circuit current		approx. 8.4 V DC / approx. 11.7 mA
Lead resistance		max. 50 Ω , consider capacitances and inductances
Switching point		1-signal: I > 2.8 mA 0-signal: I < 2.1 mA
Response delay		≤ 1 ms
Output
Connection		SL1: 8a(+), 7a(-); 10a(+), 9a(-)
Rated voltage		output II: typ. 8 V DC, max. 22 V DC
Output I		active voltage output, short-circuit proof 0-signal: 0 V 1-signal: 20 ... 31 V DC at max. 15 mA fault: 0 V
Output II		passive transistor output (resistive) 0-signal: 14 kΩ ± 10 % 1-signal: 1.8 kΩ ± 10 % fault: > 100 kΩ
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Transfer characteristics
Switching frequency
	Output I	≤ 50 Hz
	Output II	≤ 50 Hz
Galvanic isolation
Output/power supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Output/Output		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Indicators/settings
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 180 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch)
	Height	128 mm
	Width	12.5 mm
	Length	106 mm
Mounting		on termination board
Coding		pin 1 and 2 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 07 ATEX 0302X , for additional certificates see www.pepperl-fuchs.com
	Marking	II (1)G [Ex ia] IIC , II (1) D [Ex ia] IIIC , I (M1) [Ex ia] I
	Input	Ex ia
	Voltage	10.5 V
	Current	17.1 mA
	Power	45 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Output
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Certificate		Pepperl+Fuchs
	Marking	II 3G Ex nA IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 94/9/EC	EN 60079-0:2012 ; EN 60079-11:2012 ; EN 60079-15:2010
International approvals
FM approval
	Control drawing	16-534FM-12 (cFMus)
UL approval
	Control drawing	116-0364
IECEx approval		IECEx BAS 07.0097X
	Approved for	[Ex ia Ga] IIC, [Ex ia] I , [Ex ia] IIIC
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: HiC2851

Product Documentation: HiC2851

Safety and Security Documentation	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Safety Manual	ENG	PDF	328 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2851

CAD	Idioma	Tipo de Arquivo	Tamanho do Arquivo
CAD 2-D / CAD 2-D	ALL	ZIP	16364 KB
CAE
EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA)	ALL	ZIP	3536 KB

Approvals: HiC2851

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Baseefa IECEx Certificate of Conformity	IECEx BAS 07.0097X	ALL	LINK	---
Canada FM	CoC 3033219C	ALL	PDF	682 KB
Europe Baseefa ATEX Category (M1) ATEX Category (1) GD	Baseefa 07 ATEX 0302X	ALL	PDF	1615 KB
Europe Pepperl+Fuchs ATEX Category 3 G Certificate	PF 09 CERT 1440 X	ALL	PDF	208 KB
USA FM	CoC 3033219	ALL	PDF	678 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	154 KB
Control drawing FM / Control drawing FM		ALL	PDF	112 KB

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Acesse

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.