Atendimento ao Cliente da Divisão de Sensores Industriais
Rede de Atendimento - Divisão de Proteção Contra Explosão

Multifunction Terminal MFT-*

MFT-*
  • Suitable for fusing solenoids, alarm indicators, sounders etc, and diode decoupling of power supplies
  • Simple OR gate for zone 1 mounting, visible separation for field devices, relay switches
  • Bus termination
  • Current limiting
  • DIN rail mounting
  • Maintenance without hot work permit
  • Wires can be disconnected during operation once the module has been removed
    (parts under voltage remain covered)
  • Up to SIL 3 acc. to IEC/EN 61508

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:


Folhas de dados: Dados técnicos do  MFT-*

Descrição do Produto
Multifunction terminal, allows maintenance work to be carried out in hazardous areas without a hot work permit
General specifications
FunctionThe specific device function can be found in the ordering information section.
Functional safety related parameters
Safety Integrity Level (SIL)SIL 3
Electrical specifications
Resistor1 x 1 Ω ... 22 MΩ, 0.5 W
2 x 1 Ω ... 22 MΩ, 0.5 W
Diode1 x I max. 1 A
2 x I max. 0.5 A
Fuse0.032 ... 1.5 A
1.5 ... 6.3 A
Pre-arcing time/current characteristic: time-lag T
Nominal voltagemax. 250 V AC max. 30 V DC
Relay
Control24 V , approx. 5 ... 8.5 mA
Contact loadingAC max. 250 V , max. 1 A
DC max. 30 V , max. 1 A
Contact resistance0.1 Ω at 6 V, 1 A
Switching operations NO contact3 x 104
Switching operations NC contact1 x 104
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Conformity
Degree of protectionIEC 60529:2001
Ambient conditions
Ambient temperature-55 ... 55 °C (-67 ... 131 °F) (Im = 1.5 ... 6.3 A)
-55 ... 70 °C (-67 ... 158 °F) (Im = 0.032 ... 1.5 A)
The specific ambient temperature can be found in the ordering information section.
Mechanical specifications
Core cross section0.5 ... 2.5 mm2
Degree of protectionIP20 , IP30 when plug-in module is plugged in
Massapprox. 115 g , depending on model
Dimensions93 x 17.5 x 79 mm (l x w x h)
Height79 mm
Width17.5 mm
Length93 mm
Tightening torque0.5 ... 1 Nm
Data for application in connection with hazardous areas
EU-type examination certificatePTB 07 ATEX 1004 U
MarkingEx-Hexagon II 2 G Ex d e IIC
Directive conformity
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-1:2014 , EN 60079-7:2015+A1:2018
International approvals
IECEx approval
IECEx certificateIECEx BKI 08.0008U
IECEx markingEx d e IIC Gb
Marine approval
DNV GL MarineTAA0000034
General information
Ordering informationCustomer-specific values are available in the E96 series.
Minimum order quantity 50 pieces.
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027210192
ECLASS 12.027210192
ECLASS 11.027210192
ECLASS 10.0.127210190
ECLASS 9.027210190
ECLASS 8.027210190
ECLASS 5.127242692
ETIM 9.0EC003015
ETIM 8.0EC003015
ETIM 7.0EC003015
ETIM 6.0EC003015
ETIM 5.0EC001485
UNSPSC 12.139121008

Details: MFT-*

Product Documentation: MFT-*

Selecione o Idioma:
Safety and Security DocumentationIdiomaTipo de ArquivoTamanho do Arquivo
Manual de instruçõesPORPDF164 KB
Functional Safety ManualENGPDF1993 KB
Manuals
ManualENGPDF2766 KB

Design / Simulation: MFT-*

Selecione o Idioma:
CADIdiomaTipo de ArquivoTamanho do Arquivo
CAD 3-D / CAD 3-DALLSTP2318 KB
CAE
EPLAN macros MFT / EPLAN-Makros MFTALLZIP11723 KB

Approvals: MFT-*

Selecione o Idioma:
CertificatesNúmero do CertificadoIdiomaTipo de ArquivoTamanho do Arquivo
BKI IECEx Certificate of ConformityIECEx BKI 08.0008UALLLINK---
Brasil TUV Rheinland BrazilTÜV 13.1133 UALLPDF1220 KB
Bureau Veritas (Maritime) Marine22449/C0 BVALLPDF590 KB
DNV MarineTAA0000034ALLPDF110 KB
Europe PTB ATEX Category 2 GPTB 07 ATEX 1004UALLPDF1206 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0746DALLPDF358 KB

Produtos Relacionados: MFT-*

Matching System Components
FieldBarrier Junction Box, Brushed Stainless Steel, 8, 10, 12 outputs Ex ia, Brushed enclosure, IP66, Configurable cable entries for trunk and spurs, Packaged certified solution, For FOUNDATION Fieldbus H1 and PROFIBUS PA, Device coupler location: Zone 2 - high-power trunk
Zone 1 - high-power trunk, Device coupler location [2]: Zone 1 - high-power trunk, Instrument location / spur protection: Zone 0 ... 1 - intrinsic safety, Function: Device coupler, Design / Mounting: Outside installationpa
Notas Gerais sobre as informações de produto da Pepperl+Fuchs
Acesse

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

© 2024 Todos os Direitos Reservados.

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.