Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
KFD0-SCS-1.55
| General specifications |
| Signal type | Analog input/analog output |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 2 |
| Supply |
| Rated voltage | < 30 V DC , loop powered |
| Power dissipation | 0.2 W |
| Control circuit |
| Connection | terminals 8-, 9+ |
| Voltage | max. 30 V DC |
| Current | 4 ... 20 mA (quiescent current < 0.5 mA) |
| Power dissipation | 150 mW at 20 mA and Uin < 24 V |
| Field circuit |
| Connection | terminals 1+, 2 / 3- |
| Voltage | ≥ 16 V for supply voltage > 21 V |
| Current | 4 ... 20 mA (linear transmission 1 ... 22 mA) |
| Load | ≤ 800 Ω (at 20 mA) |
| Transfer characteristics |
| Voltage drop | see note |
| Deviation | |
| After calibration | ≤ ± 80 µA linearity, load and voltage dependence at 20 °C (68 °F) |
| Influence of ambient temperature | < 0.5 µA/K |
| Damping | approx. 3 dB |
| Rise time | ≤ 20 µs at 0 Ω, ≤ 600 µs with 800 Ω load |
| Galvanic isolation |
| Input/Output | basic insulation according to IEC 62103, rated insulation voltage 300 Veff |
| Indicators/settings |
| Labeling | space for labeling at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
| Galvanic isolation | IEC 62103:2003 |
| Electromagnetic compatibility | NE 21:2007 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F)
extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 120 g |
| Dimensions | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2 |
| Height | 124 mm |
| Width | 20 mm |
| Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| General information |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27210120 |
| ECLASS 12.0 | 27210120 |
| ECLASS 11.0 | 27210120 |
| ECLASS 10.0.1 | 27210120 |
| ECLASS 9.0 | 27210120 |
| ECLASS 8.0 | 27210120 |
| ECLASS 5.1 | 27210120 |
| ETIM 9.0 | EC002653 |
| ETIM 8.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| ETIM 6.0 | EC002653 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details:
KFD0-SCS-1.55
Product Documentation:
KFD0-SCS-1.55
Design / Simulation:
KFD0-SCS-1.55
Produtos Relacionados:
KFD0-SCS-1.55
| Matching System Components |
|
|
|
| Cable trunking is integrated in the mounting profile, Safe spacious separation of field and control signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa |
|
| Accessories |
|
|
|
| 3-pin screw terminal, For KF modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces greenpa |
|
|
|
|
| 3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa |
|
|
|
|
| Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa |
|
+55 11 4007 1448