Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
KFD2-EB2.R4A.B.SP
| Descrição do Produto |
| Power feed module with spring terminals, redundant supply |
| Supply |
| Connection | terminals 11+, 12-
terminals 8+, 9- |
| Rated voltage | 20 ... 30 V DC
The maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded. |
| Fusing | 5 AT/250 V AC
recommended maximum utilization of the fuse: 80 % |
| Power dissipation | ≤ 2.4 W |
| Output |
| Connection | Power Rail |
| Output current | max. 4 A |
| Output voltage | Ui ≥ rated voltage Ur = Ui - 0.6 V |
| Fault signal | relay output: NO contact |
| Contact loading | 30 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Indicators/settings |
| Display elements | LEDs |
| Control elements | DIP switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
| Electromagnetic compatibility | NE 21:2006 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F)
extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | spring terminals |
| Mass | approx. 100 g |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
| Certificate | UL 22 ATEX 2853 X |
| Marking |  II 3G Ex ec nC IIC T4 Gc |
| Directive conformity | |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019 |
| International approvals |
| FM approval | FM 22 US 0031 X |
| Control drawing | 116-0160 |
| UL approval | E106378 |
| CSA approval | CoC 1051840 |
| IECEx approval | |
| IECEx certificate | IECEx UL 16.0051X |
| IECEx marking | Ex ec nC IIC T4 Gc |
| General information |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27210119 |
| ECLASS 12.0 | 27210119 |
| ECLASS 11.0 | 27210119 |
| ECLASS 10.0.1 | 27210119 |
| ECLASS 9.0 | 27210119 |
| ECLASS 8.0 | 27210119 |
| ECLASS 5.1 | 27210119 |
| ETIM 9.0 | EC002653 |
| ETIM 8.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| ETIM 6.0 | EC002653 |
| ETIM 5.0 | EC002542 |
| UNSPSC 12.1 | 39121004 |
Details:
KFD2-EB2.R4A.B.SP
Product Documentation:
KFD2-EB2.R4A.B.SP
Design / Simulation:
KFD2-EB2.R4A.B.SP
Approvals:
KFD2-EB2.R4A.B.SP
Produtos Relacionados:
KFD2-EB2.R4A.B.SP
| Matching System Components |
|
|
|
| 35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa |
|
|
|
|
|
| 35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa |
|
|
|
|
|
| 35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa |
|
|
|
|
| Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of field and control signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa |
|
|
|
|
| Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa |
|
| Accessories |
|
|
|
| 3-pin spring terminal with push-in connection technology, For KF modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces greenpa |
|
|
|
|
| Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa |
|
+55 11 4007 1448