HART Termination Board FI-PFH-TR-AO-380X

System board for Schneider Electric, Tricon series by Triconex
HART Termination Board (ETP) for Tricon AO module
For 8-channel AO card 3805E
8-channel
Field side: pluggable screw terminals, green
Control side: ELCO socket, 56-pin

Folha de Dados
Product Documentation
Approvals
Produtos Relacionados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do FI-PFH-TR-AO-380X

Supply
Rated voltage		25 ... 28 V DC SELV/PELV
Ripple		max. 10 %
Fusing		1 A
Power dissipation		≤ 500 mW
Interface
Type		multiplexer connection : IDC plug, 26-pin
Redundancy
Supply		Redundancy available. The supply is monitored and fused.
Signal lines
Rated current		max. 30 mA per channel
Indicators/settings
Display elements		- LED PS-A (Termination Board power supply), green LED - LED PS-B (Termination Board power supply), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 For further information see system description.
Degree of protection		IEC 60529:2001
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		0 ... 50 °C (32 ... 122 °F)
Storage temperature		-15 ... 50 °C (5 ... 122 °F)
Relative humidity		≤ 93 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Mechanical specifications
Degree of protection		IP20
Connection
	Field side	pluggable screw terminals , green
	Control side	ELCO socket, 56-pin HART : 2 x IDC plug, 26-pin
	Supply	screw terminals , green
Core cross section		0.5 ... 2.5 mm² (20 ... 12 AWG)
Material
	Housing	PVC
Mass		approx. 300 g
Dimensions		126 x 123 x 59 mm (5.0 x 4.9 x 2.3 inch) (W x H x D)
	Height	123 mm
	Width	126 mm
	Depth	59 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		PF 11 CERT 1933 X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210120
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: FI-PFH-TR-AO-380X

Product Documentation: FI-PFH-TR-AO-380X

Manuals	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Manual KFD-HM-16	ENG	PDF	8323 KB

Approvals: FI-PFH-TR-AO-380X

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3	PF11CERT1933 X	ALL	PDF	189 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1070D	ALL	PDF	107 KB

Produtos Relacionados: FI-PFH-TR-AO-380X

Matching System Components

	KFD0-HMS-16 HART MUX Secondary Module
	16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART MUX primary module KFD2-HMM-16, Up to SIL 3 acc. to IEC/EN 61508pa

	KFD2-HMM-16 HART MUX Primary Module
	16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 HART MUX secondary modules can be connected, Up to SIL 3 acc. to IEC/EN 61508pa

Accessories

	K-HM26-114025 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

	K-HM14 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KFD2-HMM-16 to up to 15 KFD0-HMS-16, 14-pin ribbon cablepa

	K-HM26 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Acesso Rápido

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.