Surge Protection Barrier M-LB-Ex-2142.SP
- Surge protection barrier for 2 signal lines
- Nominal voltage 24 V DC
- Surge protection barrier for non-grounded signal lines
- Max. surge current (8/20 µs) 20 kA
- Connection via spring terminals with push-in connection technology
- DIN rail mountable
- Up to SIL 3 acc. to IEC/EN 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do M-LB-Ex-2142.SP
| General specifications | ||
|---|---|---|
| Number of protected signal lines | 2 | |
| Topology | non-grounded | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Electrical specifications | ||
| Connection | protected area: terminals 4, 5 unprotected area: terminals 2, 3 shielding/grounding: terminal 1 (optional) |
|
| Rated current | 500 mA , restrictions see derating tables UL : 400 mA , restrictions see control drawing |
|
| Leakage current | < 3 µA at 24 V and 25 °C (77 °F) , line-line | |
| Nominal voltage | 24 V DC | |
| Maximum continuous operating voltage | 30 V DC | |
| Series resistance | ≤ 3 Ω per line | |
| Impulse rating | 1 kV/0.5 kA (category C1) 10 kV/5 kA (category C2) 1 kA (category D1) |
|
| Impulse discharge current (10/350 µs) | 1 kA per line (2x) | |
| Nominal discharge current (8/20 µs) | 5 kA per line (10x) | |
| Total discharge current (8/20 µs) | 20 kA (1x) , overstressed fault mode 3 acc. to IEC 61643-21 | |
| Voltage protection level | max. 45 V line-line for nominal discharge current In max. 1400 V line-earth for nominal discharge current In |
|
| Impulse reset time | < 500 ms | |
| Insertion loss | ≤ 3 dB at 0 ... 900 kHz in 100 Ω system | |
| Conformity | ||
| Electromagnetic compatibility | EN 61326-3-1:2017 | |
| Degree of protection | IEC 60529:2013 | |
| Functional safety | IEC/EN 61508:2010 | |
| Surge protective devices for low voltage | IEC 61643-21:2000+A1:2008+A2:2012 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) Observe the temperature range limited by derating, see section derating. |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 95 % , without condensation | |
| Corrosion resistance | acc. to ISA-S71.04, severity level G3 | |
| Mechanical specifications | ||
| Degree of protection | IP20 , after mounting of the insulation spacer | |
| Connection | spring terminals , max. core cross section 1 x 2.5 mm2 | |
| Material | Polyamide (PA) | |
| Mass | approx. 32 g | |
| Dimensions | 6.2 x 93 x 72.4 mm (0.24 x 3.7 x 2.8 inch) (W x H x D) | |
| Height | 93 mm | |
| Width | 6.2 mm | |
| Depth | 72.4 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | KIWA 19 ATEX 0003 X | |
| Marking |  II 2(1)G Ex ia [ia Ga] IIC T6...T4 Gb II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
|
| Temperature class | T6, T5 or T4 , restrictions see derating tables | |
| Voltage | 30 V | |
| Current | 500 mA , restrictions see derating tables | |
| Internal capacitance | negligible | |
| Internal inductance | 20 µH | |
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 | |
| International approvals | ||
| UL approval | E501704 E501881 |
|
| Control drawing | 116-0479 | |
| Current | 400 mA , restrictions see control drawing | |
| Breakdown voltage | 30 ... 45 V line-line at 100 V/s acc. to UL 497B < 1000 V at 100 V/µs acc. to UL 497B |
|
| IECEx approval | ||
| IECEx certificate | IECEx KIWA 19.0003X | |
| IECEx marking | Ex ia [ia Ga] IIC T6...T4 Gb [Ex ia Da] IIIC [Ex ia Ma] I |
|
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27171202 |
| ECLASS 12.0 | 27171202 |
| ECLASS 11.0 | 27130805 |
| ECLASS 10.0.1 | 27130805 |
| ECLASS 9.0 | 27130805 |
| ECLASS 8.0 | 27130805 |
| ECLASS 5.1 | 27130801 |
| ETIM 9.0 | EC000941 |
| ETIM 8.0 | EC000941 |
| ETIM 7.0 | EC000941 |
| ETIM 6.0 | EC000941 |
| ETIM 5.0 | EC000941 |
| UNSPSC 12.1 | 39121610 |
Details: M-LB-Ex-2142.SP
Product Documentation: M-LB-Ex-2142.SP
| Safety and Security Documentation | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|
| Manual de instruções | POR | 160 KB | |
| Functional Safety Manual | ENG | 602 KB | |
| Manuals | |||
| Manual | ENG | 3280 KB | |
Design / Simulation: M-LB-Ex-2142.SP
| CAD | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2840 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 148 KB |
| EPLAN macro P+F.M-LB-Ex-2142.SP with accessories / EPLAN-Makro P+F.M-LB-Ex-2142.SP mit Zubehör | ALL | EDZ | 208 KB |
Approvals: M-LB-Ex-2142.SP
| Certificates | Número do Certificado | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|---|
| Canada, USA UL Hazardous Location | CoC 20211011 - E501881 RepRef 20210517 | ALL | 421 KB | |
| China SITIIAS CCC Ex Certificate | 2020322304002752 (Singapore) | ALL | 1133 KB | |
| Europe KIWA I (M1) II 2(1)G ATEX II (1) D | KIWA 19 ATEX 0003 X | ALL | 116 KB | |
| India PESO (India) CCOE | A/P/HQ/KA/104/5803 (P468064) | ALL | 459 KB | |
| Worldwide CSA IECEx Certificate of Conformity | IECEx KIWA 19.0003X | ALL | LINK | --- |
| Worldwide ÖVE (Austria) Surge Protective Device | AT 4406 | ALL | 352 KB | |
| Control Drawings | ||||
| Control Drawing UL / Control Drawing UL | ALL | 334 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-4287BPOR | POR | 186 KB | |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Centenas de produtos com SIL/PL, ferramentas gratuitas e documentos em um só lugar. Acesse e saiba mais!
Você está procurando um produto específico com uma avaliação SIL/PL? Nossa ferramenta de seleção fornece uma visão geral dos dispositivos que abrangem Safety Integrity Level (SIL) e Performance Level (PL)!
Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
+55 11 4007 1448
A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.