2 axis acceleration sensor, E1-Type approval, Analog output 4 mA ... 20 mA, Fixed evaluation limits , High shock resistance, Teachable zero point, Measuring range -2 g ... +2 g, Increased noise immunity 100 V/mfa
Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa
Ikke tilgjengelig: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Ikke tilgjengelig: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Ikke tilgjengelig: 1-channel signal conditioner, 24 V DC supply (loop powered), Logic input 19 V DC ... 26.5 V DC, non-polarized, Relay contact output for de-energized to safe function, Test pulse immunity, Up to SIL 3 acc. to IEC/EN 61508, Up to PL e acc. to EN/ISO 13849, Housing width: 12.5 mm, Number of channels: 1-channel, DTS function (de-energized to safe), Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC loop powered, Type: 1 x logic inputpa
Ikke tilgjengelig: 1-channel signal conditioner, 24 V DC supply (loop powered), Logic input 20 V DC ... 26.5 V DC, non-polarized, Fail-safe relay contact output for de-energized and energized to safe function , Test pulse immunity, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, ETS function (energized to safe), DTS function (de-energized to safe), DPS function (dual pole switching), Safety Integrity Level (SIL): SIL 3pa
Ikke tilgjengelig: 1-channel isolated barrier, 24 V DC supply (Power Rail), Potentiometer input, Voltage output 0 V ... 10 V, Lead resistance compensation adjustment, Accuracy 0.05 %, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 35 V DC, Type: 3-wire connection, Type [2]: 4-wire connection, Type [3]: 5-wire connection, Field device: potentiometer, Signal: 1 x 0 ... 10 Vpa
Ikke tilgjengelig: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Ikke tilgjengelig: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Ikke tilgjengelig: 1-channel isolated barrier, 24 V DC supply (Power Rail), Potentiometer input, Current output 4 mA ... 20 mA, Lead resistance compensation adjustment, Accuracy 0.05 %, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 35 V DC, Type: 3-wire connection, Type [2]: 4-wire connection, Type [3]: 5-wire connection, Field device: potentiometer, Signal: 1 x 4 ... 20 mApa
Ikke tilgjengelig: Surge protection for 2 supply lines, Type 3 acc. to EN 61643-11, Nominal voltage 120 V AC, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 3 acc. to EN 61643-11:2013 class III acc. to IEC 61643-1:2011, Number of protected supply lines: 2pa
Ikke tilgjengelig: Protection module for 1 supply line, Type 2 acc. to EN 61643-11, Exchange device for surge protection barrier M-LB-*.275*.D, Easy replacement of protection modules wihtout tools, High discharge capacity, Module can be exchanged under voltage (hot swap), Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 1pa
Pepperl+Fuchs' newinductiveIO-Linkdistancesensorsallowconditionmonitoring For thefirsttime, theymeasurethepositionandvelocityofdampingelementsandmonitorcriticalprocesses ... limitvalue for temperature, operatingtimes, andcountersviaIO-LinkHighmeasuringspeedofupto3m/s for thefastestthroughputtimesandincreasedproductivityIn-housedevelopmentandproductionwiththelongestexperienceonthemarket, ensuring ...
Pepperl+Fuchs' WILSENvalveandWILSENnodearewirelessM+Osensorsolutions for myriadIoTusecases ... WILSEN.valvecentralunitviastandardizedM12connections, wherebycablelengthsofupto10mcanbeselected. For easyinstallationonstandardvalvesandfittings, an EN ISO5211-compliantmountingsolutionisavailable, whichincludesmountingbracketsand ...
WCS er utformet for applikasjoner med ekstremeforhold eller spesieltlangeavstander ... eller stående. Displayet kan visenåværendeposisjonsverdi og diagnosefunksjoner, og kan informere om skitne eller skadedekodeskinnesegmenter. Finn ut mer. Forlengendevalg Hvis en applikasjonkrever en spesieltlangavstand, gjørWCSExtended det enklere ...
Interface-teknologi fra Pepperl+Fuchstilbyr et bredtspekter av komponenter og løsninger for bruksområderinnenEx-områder i prosessindustrier ... spenningsområder Noen applikasjonerkreverforskjelligeforsyningsspenninger. Det som tidligeremåtteløses med flerebryterforsterkere, kan nå håndteres av énenkeltenhet. BryterforsterkerneKFU8-SR-Ex* har flerehøydepunktersamtidig. De leveres med 19 til 30V ...
Fra battericellen til batterimodulen til batteripakken: Pepperl+Fuchstilbyrkraftigsensorteknologi for automatisertbatteriproduksjon ... moduleneidentifiseresflereganger for å sikresporbarhet. VOS2-Duniversellovervåkningssensor er det ideellevalget for denne oppgaven: Sensorenleser av 1-D- og 2-D-kodersamttrykttekst på batterimodulensetikett – raskt, pålitelig og fleksibelt ...
Få en oversikt over Pepperl+Fuchs' bredeportefølje av HMI-systemer for prosessindustrier ... aluminiumskapsling og er derforpreget av en høygrad av installasjonsfleksibilitet. Med toDisplayPort-interfacestøtter den tilkobling til toUltraHD-skjermer (4K) ved 60Hz. Den har også USBtypeC3.2gen. 1-interface og toUSBtypeA2.0-interface. BTC14 ...
I tillegg til velprøvdefunksjonerleveresTab-Ex®-nettbrett med nyskapendefunksjoner, som integrering av applikasjoner med utvidetvirkelighet, som gjørapplikasjonerinnenIndustri40 / IIoTenkle å implementere ... ProcessorExynos9810 (Lhotse) Octa-Core64-Bit; 4x2.7GHz, 4x1.7GHzQualcommSDM670Octa-Core64bit2,0GHz; 1,7GHzExynos7Octa, 1.6GHzOcta-Core (Cortex®-A53) Display1920x1200pixels (WUXGA), 8" (20,32cm) TFT, 480nits (outdoorspec) 1920x ...
1-10/922Antall produkter pr. side:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.
+47 3557 3800