Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Slots | ||
---|---|---|
Occupied slots | 2 | |
Supply | ||
Connection | wired to Ex e terminals via backplane | |
Maximum safe voltage | 60 V DC (SELV/PELV) common mode | |
Input voltage range | 18 ... 32 V DC (SELV/PELV) | |
Power dissipation | 4.7 W at 100 % load 3.8 W at 50 % load |
|
Power consumption | max. 44 W |
|
Inrush current | 6 A (30 ms) 15 A (20 µs) |
|
Output | ||
Voltage | 5.4 V DC +/- 5% , 12 V DC + 4/- 2% |
|
Power | P5V ≤ 5.4 W, P12V ≤ 39 W - P5V | |
Galvanic isolation | ||
Power supply/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff | |
Indicators/settings | ||
LED indication | LED green: OFF in case of loss of 24V or 12V or 5V | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Galvanic isolation | EN 61010-1:2010 | |
Degree of protection | IEC 60529 | |
Environmental test | EN 60068-2-14 | |
Shock resistance | EN 60068-2-27 | |
Vibration resistance | EN 60068-2-6 | |
Damaging gas | EN 60068-2-42 | |
Relative humidity | EN 60068-2-78 | |
Ambient conditions | ||
Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Relative humidity | 95 % non-condensing | |
Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 | |
Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance |
|
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 | |
Mechanical specifications | ||
Degree of protection | IP20 (module) , a separate housing is required acc. to the system description | |
Mass | approx. 970 g | |
Dimensions | 57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch) | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | ||
Marking | II 2G Ex db eb q IIC Gb | |
Wait time | wait time before removing the device: 7 min For further information see instruction manual. |
|
Directive conformity | ||
Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015+A1:2018 |
|
International approvals | ||
ATEX approval | Presafe 19 ATEX 14059U | |
IECEx approval | ||
IECEx certificate | IECEx PRE 19.0014U | |
IECEx marking | Ex db eb q IIC Gb | |
General information | ||
System information | The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate. | |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27210119 |
ECLASS 12.0 | 27210119 |
ECLASS 11.0 | 27210119 |
ECLASS 10.0.1 | 27210119 |
ECLASS 9.0 | 27210119 |
ECLASS 8.0 | 27210119 |
ECLASS 5.1 | 27210119 |
ETIM 9.0 | EC002542 |
ETIM 8.0 | EC002542 |
ETIM 7.0 | EC002542 |
ETIM 6.0 | EC002542 |
ETIM 5.0 | EC002542 |
UNSPSC 12.1 | 39121004 |
The power supply provides power for the I/O modules and com units mounted on the backplane.
Input and output are galvanically isolated from each other acc. to EN 61010-1.
Literature | Język | Typ pliku | Rozmiar pliku |
---|---|---|---|
Application Report - Communication Redundancy for Uninterrupted Operation | ENG | 529 KB | |
Application Report - LB and FB Remote I/O Systems for Digitally Connecting Analog Field Devices | ENG | 208 KB | |
Application Report - Space Saving Extension for Existing Plants | ENG | 300 KB | |
Application Report - Using Remote I/O Systems for the Efficient Digitalization of Plants | ENG | 371 KB |
Safety and Security Documentation | Język | Typ pliku | Rozmiar pliku |
---|---|---|---|
Instrukcja obsługi | POL | 167 KB | |
Manuals | |||
Hardware Manual FB-Remote-I/O-System | ENG | 9157 KB |
CAD | Język | Typ pliku | Rozmiar pliku |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 5840 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
EPLAN macro EDZ / EPLAN Makro EDZ | ALL | EDZ | 327 KB |
Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
---|---|---|---|---|
Brasil TUV Rheinland Brazil | TÜV 19.0481 U | ALL | 1179 KB | |
China SITIIAS CCC Ex Certificate | 2021322310004104 (Mannheim) | ALL | 1118 KB | |
Europe Presafe DNV GL II 2 G ATEX | Presafe 19 ATEX 14059U | ALL | 150 KB | |
Korea KOSHA | 20-AV4BO-0447U | ALL | 774 KB | |
Presafe DNV GL IECEx Certificate of Conformity | IECEx PRE 19.0014U | ALL | LINK | --- |
United Kingdom CML UKEX Category II 2 G UK-Type Examination Certificate | CML 23UKEX2152U | ALL | 159 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) | TDOC-4264BPOL | POL | 1142 KB | |
UK Declaration of Conformity (P+F) | TDOC-6782_ENG | ENG | 1110 KB |