Magnetic Immersion Probe for Continuous Measurement LMC-Ex
- Sensor for continuous level measurement in liquids
- Resolution 5 mm or 15 mm
- Media contacting parts of stainless steel
- Mounting without removing the float
- Approved for zone 0
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne LMC-Ex
| General specifications | ||
|---|---|---|
| Equipment architecture | A measuring system consists of a magnet-operated immersion probe LMC****-***-I-Ex with built-in converter and a transmitter power supply KFD2-STC4-Ex1 or of a magnet-operated immersion probe LMC****-***-O4-Ex and a potentiometer converter KFD2-PT2-Ex1. | |
| Series | LMC-Ex | |
| Output | ||
| Connection | version I: 2-wire, 4 ... 20 mA version O4: 3-wire, potentiometer connection approx. 40 kΩ |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61000-6-2:2006 , EN 61000-6-4:2011 | |
| Conformity | ||
| Degree of protection | IEC 60529:2000 | |
| Measurement accuracy | ||
| Accuracy | resolution: - version LMC5: 5 mm - version LMC15: 15 mm |
|
| Operating conditions | ||
| Process conditions | ||
| Process temperature | -20 ... 100 °C (-4 ... 212 °F) | |
| Process pressure (static pressure) | ≤ 16 bar (232.1 psi) | |
| Density | version S1: ≥ 0.6 g/cm3 version S2: ≥ 0.8 g/cm3 version S3: ≥ 0.7 g/cm3 |
|
| Ambient conditions | ||
| Ambient temperature | terminal box: -50 ... 60 °C (-58 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP66 / IP68 | |
| Connection | Version I: 2 terminals, max. 2.5 mm2 Version O4: 3 terminals, max. 2.5 mm2 |
|
| Material | float, guide tube, process connection: stainless steel 1.4571/316Ti terminal box: aluminum die-casting |
|
| Dimensions | float: - version S1: ball ∅80 mm - version S2: cylinder ∅44 mm x 52 mm - version S3: ball ∅52 mm guide tube: - version LMC5: ∅14 mm, max. length 3000 mm - version LMC15: ∅12 mm, max. length 3000 mm terminal box: 80 x 75 x 57 mm |
|
| Process connection | thread G1-1/2A, G2A to DIN/ISO 228/1 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | KEMA 03 ATEX 1497 X | |
| Marking |  II 1/2G EEx ia IIC T4...T6 |
|
| Voltage | 28 V | |
| Current | 120 mA | |
| Internal capacitance | 0 nF | |
| Internal inductance | 0 µH | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012, EN 60079-11:2012, EN 60079-26:2007 | |
| General information | ||
| Supplementary documentation | instruction manuals (SI) | |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Designation | - LML-FS1 float, ball, Ø80 mm, 1.4571/316Ti - LML-FS4 float, ball, Ø44 mm, 1.4571/316Ti - LML-FS5 float, ball, Ø52 mm, Titanium - LML-FS6 float, cylinder, Ø44 mm x 52 mm, 1.4571/316Ti |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27200502 |
| ECLASS 12.0 | 27200502 |
| ECLASS 11.0 | 27200502 |
| ECLASS 10.0.1 | 27200502 |
| ECLASS 9.0 | 27200502 |
| ECLASS 8.0 | 27200502 |
| ECLASS 5.1 | 27200502 |
| ETIM 9.0 | EC001447 |
| ETIM 8.0 | EC001447 |
| ETIM 7.0 | EC001447 |
| ETIM 6.0 | EC001447 |
| ETIM 5.0 | EC001447 |
| UNSPSC 12.1 | 41111950 |
Details: LMC-Ex
Function
The device is a sensor for continuous level measurement in liquids.
A ring magnet integrated in the float activates a reed contact resistance chain inside the probe tube via its magnetic field.
If the level changes, the resistance chain changes its total resistance by closing the contact at the float level. The resistance is converted into a standardised output signal by a control unit. This output signal is proportional to the level of the measured medium.
Product Documentation: LMC-Ex
| Safety and Security Documentation | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Instrukcja obsługi | POL | 129 KB | |
| Manuals | |||
| Manual LMC-** | ENG | 835 KB | |
Approvals: LMC-Ex
| Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| Europe KEMA ATEX Category 1/2 G | KEMA 03 ATEX 1497X | ALL | 2505 KB | |
| South Africa MASC | MASC S/22-8596X | ALL | 2779 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2126C | ALL | 106 KB | |
| Contamination Declaration | ||||
| Contamination declaration / Kontaminationserklärung | ALL | 137 KB | ||
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.