Atendimento ao Cliente da Divisão de Sensores Industriais
Rede de Atendimento - Divisão de Proteção Contra Explosão
Sensores Industriais
Indisponível para Compra
Indisponível para Compra

Ultrasonic sensor UC800-F77S-EP-IO-1,5M-V1-P003

UC800-F77S-EP-IO-1,5M-V1-P003
  • IO-Link interface for service and process data
  • Programmable via DTM with PACTWARE
  • Continuous distance value via IO-Link process data
  • Selectable sound lobe width
  • Synchronization options
  • Temperature compensation
  • Push-pull output
  • Cable with M12 plug
  • Customer-specific configuration

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:


Folhas de dados: Dados técnicos do  UC800-F77S-EP-IO-1,5M-V1-P003

Descrição do Produto
Single head system
General specifications
Sensing range60 ... 800 mm
Adjustment range70 ... 800 mm
Dead band0 ... 60 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 255 kHz
Response delayminimum : 13 ms
factory setting: 49 ms
Sensor cycle time≥ 13 ms (factory setting) ;
programmable to 60 s
Memory
Non-volatile memoryEEPROM
Write cycles300000
Indicators/operating means
LED greensolid: power on
flashing: standby mode or IO-Link communication
LED yellowsolid: object in evaluation range
flashing: switch point programming, object detected
LED redsolid: error
flashing: switch point programming, object not detected
Electrical specifications
Operating voltage10 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 40 mA
Power consumption≤ 400 mW
Time delay before availability≤ 300 ms
Interface
Interface typeIO-Link (via C/Q = Pin 4)
IO-Link revision1.1
Device profileSmart Sensor
Device ID0x300306 (3146502)
Transfer rateCOM2 (38.4 kBit/s)
Min. cycle time2.3 ms
Process data width16 bit
SIO mode supportyes
Compatible master port typeA
Input/Output
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level2.5 V ... UB
Input impedance> 22 kΩ
Output currentcurrent source < 2.5 mA
Pulse length≥ 1 ms with external control, low active
Synchronization frequency
Common mode operation≤ 82 Hz
Multiplex operation≤ 82 Hz / n , n = number of sensors , n ≤ 10
Output
Output type1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Rated operating current100 mA , short-circuit/overload protected
Voltage drop≤ 2.5 V
Repeat accuracy≤ ± 0.1 % of full-scale value
Switching frequencyfactory setting: 12 Hz programmable max. 27 Hz
Range hysteresis1 % of the adjusted operating range (default settings), programmable , min. 1 mm
Temperature influence≤ ± 0.75 % of the end value (with temperature compensation) from 10 minutes after switching on the sensor ; 0.17 %/K (without temperature compensation)
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
IEC 61131-9:2013
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
When fixing with one M18 nut, the temperature range begins with 0 °C (32 °F).
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typefixed cable with plug
Degree of protectionIP67
Material
HousingPolycarbonate
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Connector
ThreadingM12
Number of pins4
Cable
Length1500 mm
Installation positionany position
Mass40 g
Tightening torque, fastening screwswith M3 nuts max. 0.2 Nm
with M18 nuts max. 1 Nm
Dimensions
Height31 mm
Width21 mm
Length23 mm
Factory settings
OutputSwitching point 139 mm

Output mode: retroreflective mode
output behavior: Normally closed (NC)
Beam widthnarrow
Evaluation procedureaveraging (MxN)
M = 8
N = 3
Average value
General information
Scope of delivery2 nuts plastic

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: UC800-F77S-EP-IO-1,5M-V1-P003

Informative Literature: UC800-F77S-EP-IO-1,5M-V1-P003

Selecione o Idioma:
LiteratureIdiomaTipo de ArquivoTamanho do Arquivo
Application Report - Ultrasonic sensors measure roll diameter and detect web breakENGPDF172 KB

Product Documentation: UC800-F77S-EP-IO-1,5M-V1-P003

Selecione o Idioma:
Product informationIdiomaTipo de ArquivoTamanho do Arquivo
Installation and user instructions for offline parameterization of IO-Link sensorsENGPDF1788 KB
Brief Instructions
Commissioning instruction for UC*-F77*-IU* / Inbetriebnahmeanleitung für UC*-F77*-IU*ALLPDF440 KB
Manuals
Manual UC***-F77 Series Parameterization of Ultrasonic Sensors with IO-Link InterfaceENGPDF4224 KB

Approvals: UC800-F77S-EP-IO-1,5M-V1-P003

Selecione o Idioma:
CertificatesNúmero do CertificadoIdiomaTipo de ArquivoTamanho do Arquivo
Canada USA UL Ordinary LocationUL-US-2140030-0 / UL-CA-2133555-0ALLPDF546 KB
IO-Link Manufacturer DeclarationCERT-4363ALLPDF254 KB

Software: UC800-F77S-EP-IO-1,5M-V1-P003

Selecione o Idioma:
Device Description Files/DriversInformaçõesTipo de ArquivoTamanho do Arquivo
IODD for UC800-F77S-EP*-P002 / IODD für UC800-F77S-EP*-P002V1.00.001 / 2022-07-10ZIP200 KB
DTM (Device Type Manager) Package for UC*-F77* ultrasonic sensors / DTM (Device Type Manager) Package für UC*-F77* UltraschallsensorenV1.2.0.5 / 11-09-2024ZIP11923 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolV1.00.006 / 2022-07-10ZIP96138 KB

Produtos Relacionados: UC800-F77S-EP-IO-1,5M-V1-P003

Accessories

Female cordset single-ended M12 straight A-coded, 4-pin, PVC cable greyfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Notas Gerais sobre as informações de produto da Pepperl+Fuchs
Sistema de sensor de segurança USi

O Sistema de sensor ultrassônico de segurança USi está abrindo novos caminhos para aplicações de segurança, seja em ambientes empoeirados e desafiadores ou em áreas externas.

A Pepperl+Fuchs oferece a você vários documentos para download sobre os sensores ultrassônicos.

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

© 2024 Todos os Direitos Reservados.

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.