Double sheet sensor UDC-18GS-3EP1-IO-0,2M-V19

Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials
Insensitive to printing, colors, and shining surfaces
Very wide material spectrum, finest papers up to thin sheet metals as well as plastic- and metal foils
Perpendicular or inclined sensor mounting relative to the sheet plane possible
Integrated alignment aid
IO-Link Interface for process data, parameterization and diagnosis
Synchronization options
No teach-in required
Short version

Folha de Dados
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Produtos Relacionados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do UDC-18GS-3EP1-IO-0,2M-V19

General specifications
Sensing range		20 ... 60 mm , optimal distance: 45 mm
Transducer frequency		approx. 255 kHz
Memory
Non-volatile memory		EEPROM
Write cycles		300000
Indicators/operating means
LED green		indication: single sheet detected flashing (1 Hz) - standby mode flashing with short break (1 Hz) - IO-Link mode
LED yellow		indication: no sheet detected (Air)
LED red		indication: double sheet detected flashing: device error
Electrical specifications
Operating voltage		18 ... 30 V DC , ripple 10 %_SS
No-load supply current		≤ 40 mA
Power consumption		≤ 550 mW
Time delay before availability		≤ 300 ms
Interface
Interface type		IO-Link
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D
Process data		Input: 16 Bit - measurement value 8 Bit - selected threshold set 2 Bit - switching signals 3 Bit Output: 8 Bit - threshold set 2 Bit - disable transducer 1 Bit
Vendor ID		1 (0x0001)
Device ID		3148290 (0x300A02)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.8 ms
SIO mode support		yes
Compatible master port type		Class A (use adapter cable listed in accesories) Class B (use 3-pole adapter or 3-wire cable)
Input/Output 1
Designation		SYNC
Input/output type		1 synchronization connection, bidirectional
	0 Level	0 ... 1 V
	1 Level	2.5 V ... U_B
	Input impedance	> 22 kΩ
	Output rated operating current	current source < 2.5 mA
	Pulse length	0.4 ... 3 ms with external control, low active
Synchronization frequency
	Common mode operation	≤ 230 Hz
	Multiplex operation	≤ 230 Hz /n, n = number of sensors , n ≤ 10
Input/Output 2
Designation		IN2/FEEDBACK
Input/output type		input or output programmable via IO-Link : input for selection of a threshold set (factory default) output as feedback output
Input type		digital input
	Signal	0-level: 0 ... + 1V 1-level: +U_B - 1 V ... +U_B
	Input impedance	≥ 60 kΩ
	Pulse length	≥ 100 ms
Output type		PNP
	Rated operating current	8 mA
	Voltage drop	< 3 V
	Fusing	reverse polarity protected , overload and short-circuit protected
Input
Designation		IN1/TEACH
Input type		0-level: 0 ... + 1V 1-level: +U_B - 1 V ... +U_B
Pulse length		≥ 100 ms
Impedance		≥ 60 kΩ
Output
Designation		OUT 1 ... 3
Number		3
Output function		OUT 1: single sheet detected OUT 2: double sheet detected OUT 3: no sheet detected (air)
Output type		Push-pull (4 in 1) output , NC contact ( programmable )
Rated operating current		100 mA per output
Voltage drop		≤ 3 V
Switch-on delay		15 ms (programmable)
Switch-off delay		15 ms (programmable)
Pulse extension		can be activated (100 ms or IO-Link cycle time)
Fusing		reverse polarity protected , overload and short-circuit resistant
Compliance with standards and directives
Standard conformity
	Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 IEC 61131-9 / IO-Link V1.1.3
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		0 ... 60 °C (32 ... 140 °F)
Storage temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		fixed cable with plug
Housing length
	Ultrasonic transmitter	21 mm
	Ultrasonic receiver	52 mm
Housing diameter
	Ultrasonic transmitter	18 mm
	Ultrasonic receiver	18 mm
Degree of protection		IP65
Material
	Housing	Stainless steel 1.4305/AISI 303, polyamide plastic parts
	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
Connector
	Threading	M12 x 1
	Number of pins	8
Cable
	Cable diameter	4.3 mm
	Bending radius	5 x diameter , fixed installation
	Material	PUR
	Color	black
	Length	approx. 200 mm
Mass		75 g
Tightening torque, fastening screws		max. 20 Nm

Classifications

System	Classcode
ECLASS 13.0	27272801
ECLASS 12.0	27272801
ECLASS 11.0	27272801
ECLASS 10.0.1	27272801
ECLASS 9.0	27272801
ECLASS 8.0	27272801
ECLASS 5.1	27272801
ETIM 9.0	EC001847
ETIM 8.0	EC001847
ETIM 7.0	EC001847
ETIM 6.0	EC001847
ETIM 5.0	EC001847
UNSPSC 12.1	41111960

Details: UDC-18GS-3EP1-IO-0,2M-V19

Informative Literature: UDC-18GS-3EP1-IO-0,2M-V19

Literature	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Application Report - Reliable Detecting Foil Tears in Battery Cell Manufacturing	ENG	PDF	163 KB

Product Documentation: UDC-18GS-3EP1-IO-0,2M-V19

Brief Instructions	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Commissioning instruction for series UDC-18GS-* / Inbetriebnahmeanleitung für Serie UDC-18GS-*	ALL	PDF	379 KB
Safety and Security Documentation
Manual de instruções	POR	PDF	146 KB
Manuals
Manual UDC-/UDCM-GS--IO*-Series Parameterization of Ultrasonic Double Sheet Sensors with IO-Link Interface	ENG	PDF	4602 KB
Parameter Information
IO-Link Parameter-Datasheet UDC-18GS-3EP1-IO-0,2M-V19	ENG	PDF	584 KB

Design / Simulation: UDC-18GS-3EP1-IO-0,2M-V19

CAD	Idioma	Tipo de Arquivo	Tamanho do Arquivo
CAD 3-D / CAD 3-D	ALL	STP	6865 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	75 KB

Approvals: UDC-18GS-3EP1-IO-0,2M-V19

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Canada USA UL Ordinary Location	UL-US-2140156-4 / UL-CA-2133660-4	ALL	PDF	284 KB
IO-Link Manufacturer Declaration	CERT-6559A	ALL	PDF	295 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-5827	ALL	PDF	34 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5828	ALL	PDF	32 KB

Software: UDC-18GS-3EP1-IO-0,2M-V19

Device Description Files/Drivers	Informações	Tipo de Arquivo	Tamanho do Arquivo
IODD for UDC-18GS-3EP1 / IODD für UDC-18GS-3EP1	V1.00.000 / 2022-03-30	ZIP	300 KB
DTM (Device Type Manager) Package for UDC-18GS/UDC-30GS ultrasonic sensors / DTM (Device Type Manager) Package für UDC-18GS/UDC-30GS Ultraschallsensoren	V1.1.0.0 / 08-08-2022	ZIP	16847 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool	V1.00.006 / 2022-07-10	ZIP	96138 KB

Produtos Relacionados: UDC-18GS-3EP1-IO-0,2M-V19

Accessories

	V19-G-BK2M-PUR-U Female cordset
	Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, UL approved, drag chain suitablefa

	IO-Link-Master02-USB IO-Link master
	IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa

	V19-G-BK0,6M-PUR-U-V1-G-YIOL Connection cable
	Cordset for IO-Link M12 socket straight A-coded 8-pin to M12 plug straight A-coded 4-pin, PUR cable black, UL approved, drag chain suitablefa

	MH-UDB01 Mounting aid
	Mounting bracket for double sheet monitorfa

	AA-UDB-18GM-01 Alignment aid
	alignment aid for double sheet sensorfa

	V31-GM-1M-PUR-V31-GM-UDB/UDC Connection cable, shielded
	Cordset M8 socket straight to M8 plug straight A-coded, 4-pin, PUR cable 3-core black, shieldedfa

	V31-GM-2M-PUR-V31-GM-UDB/UDC Connection cable, shielded
	Cordset M8 socket straight to M8 plug straight A-coded, 4-pin, PUR cable 3-core black, shieldedfa

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Downloads gratuitos: Guia de Tecnologia dos Sensores Ultrassônicos

A Pepperl+Fuchs oferece a você vários documentos para download sobre os sensores ultrassônicos.

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.