Voltage Repeater KFD2-VR2-Ex1.500M

1-channel isolated barrier
24 V DC supply (Power Rail)
Voltage input 0 mV ... ± 500 mV
Voltage output 0 mV ... ± 500 mV
Selectable up/downscale sensor breakage detection

Folha de Dados
Informative Literature
Product Documentation
Design / Simulation
Approvals
Produtos Relacionados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do KFD2-VR2-Ex1.500M

General specifications
Signal type		Analog input
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		19 ... 30 V DC
Ripple		within the supply tolerance
Rated current		≤ 11 mA
Power dissipation/power consumption		0.3 W max.
Input
Connection side		field side
Connection		terminals 4+, 5-
Input resistance		min. 20 MΩ
Transmission range		-500 ... 500 mV
Offset voltage/current		≤ 5 µV / ≤ 5 nA
Line fault detection		1.3 µA
Output
Connection side		control side
Connection		terminals 7+, 8-
Voltage		-500 ... 500 mV
Load		Accuracy figures for infinite load impedance. Additional 0.03 % of span for a load resistance of 10 kΩ
Fault signal		sensor breakage: > +500 mV (upscale), < -500 mV (downscale)
Output resistance		max. 3 Ω
Transfer characteristics
Cut-off frequency		350 Hz (-3 dB)
Deviation
	After calibration	at 20 °C (68 °F): ± 30 µV up to ± 100mV/± 0.03 % of the span up to +500 mV/± 0.03 % of the span up to -500 mV
	Influence of ambient temperature	± 10 µV/K (typical ± 5 µV/K)
Absolute		< 0.25 K at 30 V voltage supply
Rise time		≤ 1 ms
Galvanic isolation
Output/power supply		functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements		LED
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2006
Degree of protection		IEC 60529:2001
Protection against electrical shock		UL 61010-1
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 125 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
	Height	119 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 06 ATEX 0040
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Voltage	5.5 V DC
	Current	2.4 mA
	Power	3.3 mW
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Certificate		BASEEFA 09 ATEX 0219X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
UL approval		E106378
	Control drawing	116-0334 (cULus)
IECEx approval
	IECEx certificate	IECEx BAS 06.0011 IECEx BAS 09.0103X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210125
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFD2-VR2-Ex1.500M

Informative Literature: KFD2-VR2-Ex1.500M

Literature	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KFD2-VR2-Ex1.500M

Safety and Security Documentation	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Manual de instruções	POR	PDF	163 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-VR2-Ex1.500M

CAD	Idioma	Tipo de Arquivo	Tamanho do Arquivo
CAD 3-D / CAD 3-D	ALL	STP	2510 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	1161 KB

Approvals: KFD2-VR2-Ex1.500M

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Australia Test Safe	ANZEx 17.3006X	ALL	PDF	6788 KB
Baseefa IECEx Certificate of Conformity	IECEx BAS 09.0103X	ALL	LINK	---
Baseefa IECEx Certificate of Conformity	IECEx BAS 06.0011	ALL	LINK	---
Brasil TUV Rheinland Brazil	TÜV 13.1141	ALL	PDF	1140 KB
Canada UL cUL	E106378 cUL (QUZW7)	ALL	LINK	---
Canada UL cUL	E106378 cUL (QVAJ7)	ALL	LINK	---
China SITIIAS CCC Ex Certificate	2020322316001441 (Singapore)	ALL	PDF	1069 KB
DNV Marine	TAA00001WX	ALL	PDF	106 KB
Europe Baseefa II (1) D I (M1) II (1) G	Baseefa 06 ATEX 0040	ALL	PDF	269 KB
Europe Baseefa II 3 G	Baseefa 09 ATEX 0219X	ALL	PDF	253 KB
USA UL	E106378 UL (QUZW)	ALL	LINK	---
USA UL	E106378 UL (QVAJ)	ALL	LINK	---
United Kingdom UKEX Category (1) G UK-Type Examination Certificate UKEX Category (M1) UKEX Category (1) D	CML 21UKEX21101	ALL	PDF	186 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	52 KB
Instruction leaflet / Beipackzettel		ALL	PDF	103 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0774D	ALL	PDF	83 KB

Produtos Relacionados: KFD2-VR2-Ex1.500M

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Acesso Rápido

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.