SMART Current Driver KFD2-SCD2-Ex2.LK

2-channel isolated barrier
24 V DC supply (Power Rail)
Current output up to 650 Ω load
HART-IP and valve positioner
Line fault detection (LFD)
Accuracy 0.1 %
Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Folha de Dados
Informative Literature
Product Documentation
Design / Simulation
Approvals
Produtos Relacionados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do KFD2-SCD2-Ex2.LK

General specifications
Signal type		Analog output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Systematic capability (SC)		SC 3
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		19 ... 30 V DC
Ripple		≤ 10 %
Rated current		≤ 45 mA at 24 V
Power dissipation		≤ 1 W at 20 mA and 500 Ω load
Power consumption		≤ 1 W
Input
Connection side		control side
Connection		terminals 7-, 8+, (9+); 10-, 11+, (12+)
Input signal		4 ... 20 mA , limited to approx. 30 mA
Input voltage		open loop voltage of the control system ≤ 30 V
Voltage drop		approx. 6 V at 20 mA
Input resistance		field wiring open circuit : > 100 kΩ field wiring < 50 Ω : > 100 kΩ when using terminals 1, 2 and 4, 5
Output
Connection side		field side
Connection		terminals 1+, 2-; 4+, 5- terminals 3+, 2-; 6+, 5- (no short circuit detection)
Voltage		≥ 13 V at 20 mA
Current		4 ... 20 mA
Load		100 ... 650 Ω , for terminals 1, 2; 4, 5 0 ... 550 Ω , for Terminals 2, 3; 5, 6
Ripple		20 mV rms
Line fault detection		breakage, load > 100 kΩ, short-circuit, load < 50 Ω
Fault indication output
Output type		open collector transistor (internal fault bus)
Transfer characteristics
Deviation		at 20 °C (68 °F), 4 ... 20 mA < 0.1 % of full scale, incl. non-linearity and hysteresis
	Influence of ambient temperature	< 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F))
Frequency range		field side into the control side: bandwidth with 0.5 V_pp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V_pp signal 0 ... 3 kHz (-3 dB)
Rise time		10 to 90 % ≤ 10 ms
Galvanic isolation
Input/Output		basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Input/power supply		basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Output/power supply		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Input/input		functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements		LEDs
Labeling		space for adhesive label at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 EN 61326-3-2:2018
Degree of protection		IEC 60529
Protection against electrical shock		UL 61010-1:2012
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 135 g
Dimensions		20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2
	Height	124 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		BAS 00 ATEX 7240 X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia, Ex iaD
	Voltage	25.2 V
	Current	93 mA
	Power	585.3 mW
	Internal capacitance	1.05 nF
	Internal inductance	0
Supply
	Maximum safe voltage	250 V _rms (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	250 V _rms (Attention! The rated voltage can be lower.)
Certificate		FIDI 22 ATEX 0002 X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-11:2012 , EN IEC 60079-7:2015+A1:2018
International approvals
UL approval		E106378
	Control drawing	116-0345 (cULus)
IECEx approval
	IECEx certificate	IECEx BAS 04.0014X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210120
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFD2-SCD2-Ex2.LK

Informative Literature: KFD2-SCD2-Ex2.LK

Literature	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KFD2-SCD2-Ex2.LK

Safety and Security Documentation	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Manual de instruções	POR	PDF	168 KB
Functional Safety Manual	ENG	PDF	1969 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-SCD2-Ex2.LK

CAD	Idioma	Tipo de Arquivo	Tamanho do Arquivo
CAD 3-D / CAD 3-D	ALL	STP	3048 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	1641 KB

Approvals: KFD2-SCD2-Ex2.LK

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Australia Test Safe	ANZEx 17.3006X	ALL	PDF	6788 KB
Baseefa IECEx Certificate of Conformity	IECEx BAS 04.0014X	ALL	LINK	---
Brasil TUV Rheinland Brazil	TÜV 14.0363	ALL	PDF	1268 KB
Canada, USA UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC E106378 - RepRef E106378-20110805	ALL	PDF	414 KB
China SITIIAS CCC Ex Certificate	2020322316001224 (Singapore)	ALL	PDF	1042 KB
DNV Marine	TAA00001WX	ALL	PDF	106 KB
Europe Baseefa II (1) D II (1) G I (M1) ATEX	BAS 00 ATEX 7240X	ALL	PDF	3148 KB
Europe Fiditas ATEX Category 3 G	FIDI 22 ATEX 0002X	ALL	PDF	2200 KB
India PESO (India) CCOE	A/P/HQ/KA/104/5818 (P488629)	ALL	PDF	79 KB
Korea KOSHA	12-AV4BO-0391	ALL	PDF	589 KB
South Africa MASC	MASC MS/17-0861X	ALL	PDF	664 KB
Ukraine SERTIS Ex	SC 21.0646 X	ALL	PDF	12351 KB
United Kingdom CML UK-Type Examination Certificate UKEX Category (1) D UKEX Category (1) G UKEX Category (M1)	CML 21UKEX2903X	ALL	PDF	145 KB
Worldwide TUV Rheinland Functional Safety Certificate	TÜV-Rheinland 968/FSP 2066.00/20	ALL	PDF	650 KB
Control Drawings
Control drawing CSA / Control drawing CSA		ALL	PDF	141 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4590B	ALL	PDF	89 KB
UKCA-Declaration of conformity / UKCA-Konformitätserklärung	DOC-5680	ALL	PDF	79 KB

Produtos Relacionados: KFD2-SCD2-Ex2.LK

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Acesso Rápido

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.