Solenoid Driver HiC2877

1-channel isolated barrier
24 V DC supply (bus or loop powered)
Output 40 mA at 11.2 V DC, 55 mA current limit
Contact or logic control input
Entity parameter I_o/I_sc = 93 mA
Line fault detection (LFD)
Test pulse immunity
Up to SIL 3 acc. to IEC/EN 61508 (loop powered)

Folha de Dados
Informative Literature
Product Documentation
Design / Simulation
Approvals
Produtos Relacionados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do HiC2877

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Connection		SL1: 1a, 1b(-); 2a, 2b(+)
Rated voltage		20.4 ... 30 V DC loop powered 20.4 ... 30 V DC bus powered via Termination Board
Input current		62 mA at 24 V, 300 Ω load
Power dissipation		1 W at 24 V, 300 Ω load
Input
Connection side		control side
Connection		SL1: 8a(+), 7a(-) loop powered SL1: 10a(+), 9a(-) bus powered
Control input		external switch (dry contact or open collector) non isolated or logic signal input fully floating
Signal level		1-signal: 15...30 V DC (current limited to 3 mA) or contact close (internal 10 kΩ pull-up) 0-signal: 0...5 V DC or contact open
Power dissipation		1 W at 24 V, 300 Ω load for loop powered
Inrush current		0.2 A , 15 ms loop powered
Output
Connection side		field side
Connection		SL2: 5a(+), 5b(-)
Internal resistor		approx. 280 Ω
Current		≤ 40 mA
Voltage		≥ 11.2 V
Current limit		55 mA
Open loop voltage		approx. 22.5 V
Load		nominal 0.1 ... 5 kΩ
Switching frequency		- bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz - loop powered: max. 10 Hz
Energized/De-energized delay		- bus powered: filter OFF: 1 ms, filter ON: 10 ms - loop powered: switch-on 50 ms, switch-off 6 ms (300 Ω load)
Line fault detection
	Short-circuit	< 25 Ω
	Open-circuit	> 100 kΩ
	Test current	< 4 mA
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Fault current		4 mA pulsing (20 ms ON, 200 ms OFF)
Fault level		lead short-circuit detection at < 25 Ω lead breakage detection at > 100 kΩ typical
Galvanic isolation
Output/power supply, inputs, and collective error		safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Factory setting		bus powered, input: dry contact, line fault detection enabled
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		pin 2 and 3 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		CESI 10 ATEX 046
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia Ga, Ex ia Da, Ex ia Ma
	Voltage	25.2 V
	Current	93 mA
	Power	586 mW
Supply
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Certificate		KIWA 15 ATEX 0036 X
	Marking	II 3G Ex ec IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018
International approvals
FM approval
	Control drawing	116-0431 (cFMus)
UL approval
	Control drawing	116-0383 (cULus)
IECEx approval
	IECEx certificate	IECEx CES 10.0017 IECEx KIWA 15.0018X
	IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: HiC2877

Informative Literature: HiC2877

Literature	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Application Guideline Solenoid Drivers	ENG	PDF	1982 KB

Product Documentation: HiC2877

Safety and Security Documentation	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Manual de instruções	POR	PDF	164 KB
Functional Safety Manual	ENG	PDF	1399 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2877

CAD	Idioma	Tipo de Arquivo	Tamanho do Arquivo
3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: HiC2877

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Brasil TUV Rheinland Brazil	TÜV 18.3033	ALL	PDF	501 KB
Canada FM	FM 17 CA 0057X	ALL	PDF	328 KB
Canada USA UL Certificate of Compliance Hazardous Location UL E106378 cULus	CoC 20181016 - E106378 RepRef 20140228	ALL	PDF	260 KB
Europe CESI ATEX Category (1) D ATEX Category (1) G ATEX Category (M1)	CESI 10 ATEX 046	ALL	PDF	907 KB
Europe KIWA ATEX Category 3 G	KIWA 15 ATEX 0036X	ALL	PDF	97 KB
KIWA Ex ec IECEx Certificate of Conformity Zone 2	IECEx KIWA 15.0018X	ALL	LINK	---
Korea KOSHA	15-AV4BO-0597	ALL	PDF	630 KB
USA FM	FM 17 US 0111X	ALL	PDF	330 KB
Worldwide CESI IECEx Certificate of Conformity	IECEx CES 10.0017	ALL	LINK	---
exida Functional Safety Assessment	P+F 11/07-044 R034 V1R2	ALL	PDF	577 KB
Control Drawings
UL Control Drawing		ALL	PDF	88 KB
FM Control Drawing		ALL	PDF	89 KB
Declaration of Conformity
EU Declaration of Conformity (Pepperl+Fuchs)	DOC-0930C	ALL	PDF	49 KB

Produtos Relacionados: HiC2877

Accessory of

	HiCTB16-YRS-RRB-AK-CC-DO16 Termination Board
	System board for Yokogawa ProSafe-RS, For 16-channel DO card SDV541, For 16 modules, Recommended modules: HiC2871 (DO), HiC2873 (DO), HiC2877 (DO), 24 V DC supply, Hazardous area: spring terminals, blue, Non-hazardous area: Yokogawa system connector, 50-pin, Number of modules: 16, Signal type: Digital Output, Manufacturer: Yokogawa, Control system type: ProSafe-RSpa

	HiCTB16-TRI-DOISS-EL-PL-Y1 Termination Board
	System board for Schneider Electric, Tricon series by Triconex, TAN48 approval, For 16-channel DO cards 3604E and 3624, For 16 modules, Recommended modules: HiC2873 (DO), HiC2877 (DO), 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: ELCO socket, 56-pin, Number of modules: 16, Signal type: Digital Output, Manufacturer: Triconex, Control system type: Triconpa

	HiCTB32-TRI-DOISS-EL-PL-Y1 Termination Board
	System board for Schneider Electric, Tricon series by Triconex, TAN48 approval, For 32-channel (16+16) DO cards 3625 and 3664, For 32 modules, Recommended modules: HiC2873 (DO), HiC2877 (DO), 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: ELCO socket, 56-pin, Number of modules: 32, Signal type: Digital Output, Manufacturer: Triconex, Control system type: Triconpa

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Acesso Rápido

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.