Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
AL2109-P-1820/25/49/143 R=1,5m
Descrição do Produto |
High-resolution light grid for detecting people and objects, set comprising emitter and receiver, field height: 1800 mm, light on, 1 NPN output and 1 PNP output, M8 plug |
General specifications |
Effective detection range | 1200 ... 1500 mm switchable 0 ... 3500 mm |
Threshold detection range | 3500 mm |
Light source | IRED |
Light type | modulated infrared light , 950 nm |
Field height | 1800 mm |
Beam crossover | automatic, 3x/5x/7x (depending on distance between transmitter/receiver) |
Beam blanking | Defective beams are faded out after 60 s. Deactivation of the light grid upon failure of 2 adjacent beams or more than 50 % of all beams |
Beam spacing | 90 mm |
Number of beams | 61 ... 135 (dynamic) |
Opening angle | Emitter: < 20 ° , Receiver: < 6 ° |
Ambient light limit | > 100000 Lux |
Accessories provided | Magnet |
Functional safety related parameters |
MTTFd | 180 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Function indicator | LED red (in receiver): Illuminates after connecting operating power, out when object is detected, flashes in case of permanent interruption of 2 neighbouring beams |
Electrical specifications |
Operating voltage | 11 ... 30 V DC |
Ripple | 10 % |
No-load supply current | < 180 mA |
Output |
Switching type | light-on |
Signal output | 1 PNP and 1 NPN, short-circuit protected |
Switching voltage | max. 30 V DC |
Switching current | 100 mA |
Switching frequency | < 3 Hz |
Response time | < 100 ms |
Compliance with standards and directives |
Directive conformity | |
| EMC Directive 2004/108/EC | EN 12015:2014 EN 12016:2013 |
Standard conformity | |
| Product standard | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
| Standards | EN 81-70:2003/A1:2004; Section 5.2.4 EN 81-20:2014; Section 5.3.6.2.2.1 Taking into account object detection in accordance with the datasheet specification for the monitoring field. |
Approvals and certificates |
UL approval | cULus Listed |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -10 ... 60 °C (14 ... 140 °F) |
Storage temperature | -20 ... 65 °C (-4 ... 149 °F) |
Mechanical specifications |
Profile width | 9 mm |
Degree of protection | IP54 |
Connection | M8 x 1 connector, 4-pin |
Material | |
| Housing | Aluminum |
| Optical face | plastic |
Mass | 2000 g (device) |
Dimensions | |
| Width | 9 mm |
| Depth | 34 mm |
| Length | 2000 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270910 |
ECLASS 12.0 | 27270910 |
ECLASS 11.0 | 27270910 |
ECLASS 10.0.1 | 27270910 |
ECLASS 9.0 | 27270910 |
ECLASS 8.0 | 27270910 |
ECLASS 5.1 | 27270910 |
ETIM 9.0 | EC002549 |
ETIM 8.0 | EC002549 |
ETIM 7.0 | EC002549 |
ETIM 6.0 | EC002549 |
ETIM 5.0 | EC002549 |
UNSPSC 12.1 | 39121528 |
Details:
AL2109-P-1820/25/49/143 R=1,5m
Product Documentation:
AL2109-P-1820/25/49/143 R=1,5m
Design / Simulation:
AL2109-P-1820/25/49/143 R=1,5m
Approvals:
AL2109-P-1820/25/49/143 R=1,5m
Produtos Relacionados:
AL2109-P-1820/25/49/143 R=1,5m
Accessories |
|
|
|
Mounting set for backboard mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa |
|
|
|
|
Mounting set for mechanical extension of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mounting, Material: Aluminum housingfa |
|
|
|
|
Mounting set for lateral mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa |
|