3-D LiDAR sensor OMD10M-R2300-B23-V1V1D-4S
- High angle resolution
- Can be aligned using an integrated pilot laser
- Measuring method PRT (Pulse Ranging Technology)
- Compact design
- High pollution tolerance
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del OMD10M-R2300-B23-V1V1D-4S
| Descripción del producto |
|---|
| R2300, 3-D LiDAR sensor for object detection and positioning, measuring range to object up to 10 m, Ethernet |
| General specifications | ||
|---|---|---|
| Measuring range | 0.2 ... 4 m (black 10%) 0.2 ... 10 m (white 90%) |
|
| Reference target | Kodak white (90%) | |
| Light source | laser diode | |
| Laser nominal ratings | ||
| Note | LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | Measuring laser infrared light 905 nm Pilot laser red light 650 nm |
|
| Beam divergence | Measuring laser: transversal 2 mrad , longitudinal 9.5 mrad Pilot laser: 0.3 mrad |
|
| Pulse length | Measuring laser: 5.2 ns Pilot laser: 1.1 µs |
|
| Repetition rate | 90 kHz | |
| max. pulse energy | Measuring laser: < 81 nJ Pilot laser: < 60 nJ |
|
| Measuring method | Pulse Ranging Technology (PRT) | |
| Frame rate | 25 fps 12.5 fps |
|
| Scan rate | 100 s-1 50 s-1 |
|
| Scanning zone | 100° horizontal, 9° vertical | |
| Diameter of the light spot | 25 mm x 100 mm at 10 m | |
| Filter | Maximum, average, median | |
| Ambient light limit | 60000 Lux |
|
| Resolution | 1 mm | |
| Functional safety related parameters | ||
| MTTFd | 75 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Data flow indicator | LED yellow: active ethernet LED green: Ethernet link |
|
| Function indicator | LED red: fault |
|
| Control elements | none | |
| Parameterization indicator | none | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 300 mA / 24 V DC | |
| Power consumption | < 8 W | |
| Time delay before availability | < 20 s | |
| Interface | ||
| Interface type | Fast Ethernet | |
| Protocol | HTTP , UDP/IP | |
| Input/Output | ||
| Input/output type | none | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | EN 60825-1:2014 | |
| Measurement accuracy | ||
| Measuring speed | 50000 measurements per second | |
| Measured value noise | typ. 30 mm , 1 sigma | |
| Angle resolution | 0.1° at 12.5 Hz | |
| Absolute accuracy | typ. ± 30 mm | |
| Repeat accuracy | < 12 mm | |
| Approvals and certificates | ||
| Protection class | III (operating voltage 50 V) | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 50 °C (-22 ... 122 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | 95 % , no moisture condensation | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin, M12x1 connector, standard (supply) , shield connected on both sides 4-pin, M12x1 socket, D-coded (LAN) |
|
| Material | ||
| Housing | ABS + PC | |
| Optical face | PC (Polycarbonate) | |
| Mass | approx. 0.27 kg | |
| Tightening torque, fastening screws | 1.5 Nm | |
| Dimensions | ||
| Height | 57 mm | |
| Width | 96 mm | |
| Length | 69 mm | |
| Number of mounting holes | 4 , max. thread depth 9 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: OMD10M-R2300-B23-V1V1D-4S
Función
El sensor LiDAR 3D utiliza Pulse Ranging Technology (PRT). El sensor alcanza así un amplio rango de detección para anchuras de punto luminoso reducidas.
El dispositivo tiene un ángulo de medición de 100°. Gracias a sus 4 capas de escaneo, el dispositivo produce datos 3D.
El láser piloto conmutable opcional se proyecta con precisión en las capas de escaneo. Esto permite orientar el sensor de forma óptima.
Tanto la salida de los valores de medición como la parametrización se realizan a través de una interfaz Ethernet estándar.
Informative Literature: OMD10M-R2300-B23-V1V1D-4S
| Literature | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Product Overview - LiDAR Sensors | ENG | 2253 KB |
Product Documentation: OMD10M-R2300-B23-V1V1D-4S
| Protocol Information | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| R2300 Ethernet Protocol Description / R2300 Ethernet Protokollbeschreibung | ALL | 4059 KB |
Approvals: OMD10M-R2300-B23-V1V1D-4S
| Declaration of Conformity | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) | TDOC-4893DSPA | SPA | 218 KB | |
| UK Declaration of Conformity (P+F) | TDOC-6953AENG | ENG | 194 KB |
Productos asociados: OMD10M-R2300-B23-V1V1D-4S
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.