Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del
ICE1-16DI-G60L-V1D
| Descripción del producto |
| Ethernet IO module with 16 digital inputs |
| General specifications |
| UL File Number | E223772 |
| Indicators/operating means |
| LED indication | see manual |
| Rotary switch | Setting the fieldbus protocol |
| Electrical specifications |
| Rated operating voltage | 18 ... 30 V |
| Nominal voltage | 24 V DC |
| Current consumption | 120 mA |
| Current loading capacity | Max. 2 x 16 A per module
(Loop-through current via L-coded power supply)
Total current: max. 9 A per module |
| Interface 1 |
| Interface type | Industrial Ethernet |
| Physical | M12, D-coded |
| Protocol | PROFINET IO with media redundancy protocol (MRP)
EtherNet/IP with Device Level Ring (DLR)
EtherCAT® |
| Transfer rate | 10/100 Mbps |
| Input |
| Input type | 2-, 3-, 4-wire PNP, DC |
| Number/Type | 16 Digital inputs (X1 – X8)
short-circuit protected |
| Supply | 24 V DC from US |
| Input current | 5 mA (limited internally) |
| Sensor supply | max. 200 mA per port (X1 - X8) |
| Switching point | |
| 0 (unattenuated) | > -3 VDC ... 5 VDC |
| 1 (attenuated) | > 11 VDC 30 VDC |
| Fusing | Electronic overload and short-circuit protection |
| Input filter | 3 ms |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 |
| Standard conformity |
| Degree of protection | EN 60529:2000 |
| Emitted interference | EN 61000-6-4:2007+A1:2011 |
| Noise immunity | EN 61000-6-2:2005 |
| Shock resistance | EN 61131-2:2004 |
| Ambient conditions |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Cold start temperature | -40 °C (-40 °F) |
| Relative humidity | max. 95 % |
| Altitude | 0 ... 2000 m |
| Shock and impact resistance | 50 g, 11 ms, all axes |
| Vibration resistance | 15 g at 5 - 500 Hz |
| Pollution degree | 3 |
| Mechanical specifications |
| Contact elements | PA |
| Degree of protection | IP65 / IP67 / IP69K |
| Connection | Power Supply M12, L-coded
Fieldbus M12, D-coded
Inputs M12, A-coded |
| Material | |
| Contacts | CuSn, gold-plated
CuNi, gold-plated |
| Housing | Diecast zinc |
| Seal | FKM |
| Mass | 500 g |
| Tightening torque, fastening screws | 1 Nm |
| Tightening torque, cable gland | 0.6 Nm |
| Dimensions | |
| Height | 200 mm |
| Width | 59.6 mm |
| Length | 21 mm |
| Construction type | Field housing |
| Tightening torque of clamping screws | 0.5 Nm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27242604 |
| ECLASS 12.0 | 27242604 |
| ECLASS 11.0 | 27242604 |
| ECLASS 10.0.1 | 27242604 |
| ECLASS 9.0 | 27242604 |
| ECLASS 8.0 | 27242604 |
| ECLASS 5.1 | 27242604 |
| ETIM 9.0 | EC001597 |
| ETIM 8.0 | EC001597 |
| ETIM 7.0 | EC001597 |
| ETIM 6.0 | EC001597 |
| ETIM 5.0 | EC001597 |
| UNSPSC 12.1 | 32151705 |
Details:
ICE1-16DI-G60L-V1D
Product Documentation:
ICE1-16DI-G60L-V1D
Design / Simulation:
ICE1-16DI-G60L-V1D
Approvals:
ICE1-16DI-G60L-V1D
Software:
ICE1-16DI-G60L-V1D
Productos asociados:
ICE1-16DI-G60L-V1D
| Accessories |
|
|
|
| Male connector M12 straight D-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa |
|
|
|
|
| Male connector M12 straight A-coded 4-pin, for cable diameter 6 - 8 mm, field-attachablefa |
|
|
|
|
| Cordset M12 socket straight to M12 plug straight L-coded, 5-pin, PUR cable grey, UL approvedfa |
|
|
|
|
| Female cordset single-ended M12 straight L-coded, 5-pin, PUR cable grey, UL approvedfa |
|
|
|
|
| Female connector M12 straight L-coded 5-pin, for cable diameter 8 - 13 mm, field-attachablefa |
|
|
|
|
| Ethernet bus cable M12 plug straight D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa |
|
|
|
|
| Ethernet bus cable M12 plug straight to M12 plug straight D-coded, 4-pin, PUR cable green, Cat5e, shielded, UL approved, drag chain suitablefa |
|
|
|
|
| Y connection cable M12 plug straight A-coded 4-pin to 2x M12 socket straight A-coded 4-pin, 2x PUR cable weld spatter resistant black, UL approved, drag chain suitable, torsion resistantfa |
|
|
|
|
| Blind plug for M12 socketsfa |
|
|
|
|
| torque screwdriver (0.6 Nm)fa |
|
|
|
|
| plug-in cap M12fa |
|
+49 621 776-0