Read/write station IUT-F191-R4-V1-FR2-02
- Flexible UHF read/write station with short detection range
- Compact and robust housing for harsh industrial environments
- Multi-tag reading of up to 20 tags ensures increased productivity
- Circular antenna polarization ensures reliable transponder detection and improves process flow
- Connection via integrated RS-485 interface
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del IUT-F191-R4-V1-FR2-02
| Descripción del producto |
|---|
| UHF read/write station, USA and Canada |
| General specifications | ||
|---|---|---|
| Operating frequency | 902 … 928 MHz: USA, Canada Transmission licenses for other countries on request |
|
| Emitted power | 3 … 150 mW EIRP adjustable | |
| Indicators/operating means | ||
| LED green | Ready for operation | |
| LED yellow | Read/write operation successful | |
| LED blue | Transmission mode | |
| Electrical specifications | ||
| Rated operating voltage | 10 ... 30 V DC | |
| Current consumption | ≤ 190 mA | |
| Power consumption | ≤ 1.9 W | |
| Surge protection | category 2 | |
| Interface | ||
| Physical | RS-485 point-to-point connection | |
| Protocol | ASCII | |
| Transfer rate | 38400 Bit/s | |
| Standard conformity | ||
| Electromagnetic compatibility | EN 301489-1 EN 301489-3 |
|
| Degree of protection | EN 60529 | |
| RFID | ISO/IEC 18000-63 | |
| Approvals and certificates | ||
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
|
| Ambient conditions | ||
| Classification | Environmental condition A (controlled environment) | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) (Operation with nontransmission periods) -25 ... 55 °C (-13 ... 131 °F) (Continuous transmission mode) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PA 6.6 | |
| Mass | 700 g | |
| Dimensions | ||
| Height | 47 mm | |
| Width | 165 mm | |
| Length | 165 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IUT-F191-R4-V1-FR2-02
Product Documentation: IUT-F191-R4-V1-FR2-02
| We are sorry, there are no documents for your language selection. Please select another language. |
Design / Simulation: IUT-F191-R4-V1-FR2-02
| CAD | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1114 KB |
Approvals: IUT-F191-R4-V1-FR2-02
| Declaration of Conformity | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung | ALL | 61 KB |
Productos asociados: IUT-F191-R4-V1-FR2-02
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
Conozca el nuevo IUT-F190-B40, que está diseñado para rangos de detección medios y se puede integrar de forma rápida y sencilla en los sistemas TO y TI…
Visite nuestro "Hub RFID: esta página web especial es una base de conocimientos sobre RFID. Obtenga respuestas a preguntas frecuentes y aprenda sobre las aplicaciones RFID más habituales...
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.