Nem rendelhető

Solenoid Driver KFD2-RCI-Ex1

1-channel isolated barrier
24 V DC supply (Power Rail)
Output 20.4 mA at 13.5 V DC
19 V DC ... 30 V DC input
Line fault detection (LFD)
Conformal coating
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok KFD2-RCI-Ex1

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		19 ... 30 V DC
Rated current		< 35 mA
Power consumption		< 0.8 W
Input
Connection side		control side
Connection		terminals 10+, 11-
Input current		40 mA at 19 ... 30 V DC
Signal level		1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC
Power consumption		< 1.2 W
Operating mode		loop powered
Output
Connection side		field side/control side
Connection		terminals 1+, 3- (terminals 1+, 2 for test loop)
Internal resistor		approx. 275 Ω
Current		≤ 20.4 mA
Voltage		≥ 13.5 V
Open loop voltage		> 16 V
Voltage		1-signal: > 13.5 V
Current		1-signal: 20.4 A 0-signal: 4.2 mA
Load		max. 650 Ω
Response time		< 40 ms input to output
Line fault detection		short circuit voltage < 1 V , open circuit voltage > 16 V
Output II
	Connection	terminal 7: source (-) or sink (+), terminal 8: source (+), terminal 9: sink (-)
	Current	11 mA (source or sink mode)
	Voltage	9 ... 30 V sink mode from external supply
	Load	max. 650 Ω , source mode , for HART ≥ 230 Ω
	Communication	pass-through of HART signal between input II and output
Galvanic isolation
Input/power supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Output II/power supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 150 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
	Height	119 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		CESI 09 ATEX 037
	Marking	II (1)GD [Ex ia] IIC; [Ex iaD] [circuit(s) in zone 0/1/2/20/21/22]
	Equipment	terminals 1+, 2 / 3-
	Voltage	24.5 V
	Current	93.6 mA
	Power	595 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	253 V (Attention! The rated voltage can be lower.)
Collective error message
	Maximum safe voltage	253 V (Attention! The rated voltage can be lower.)
Certificate		PF 09 CERT 1438 X
	Marking	II 3G Ex nA IIC T4 Gc
Galvanic isolation
	Output I/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
CSA approval
	Control drawing	116-0335
IECEx approval
	IECEx certificate	IECEx CES 09.0008
	IECEx marking	[Ex ia] IIC , [Ex iaD]
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KFD2-RCI-Ex1

Function

This isolated barrier is used for intrinsic safety applications. The device can be used in shut down applications with HART positioners.

Via the logic input the positioner is energized or de-energized (shut down). Independent of the status, a second input enables HART communication with the positioner. With this the asset management system can request for example diagnostic information or can initiate a partial stroke test. The HART communication also works with deenergized positioner.

A unique collective error messaging feature is available when used with the Power Rail system.

Product Documentation: KFD2-RCI-Ex1

Product information	Nyelv	Fájltípus	Fájlméret
Application Guideline Solenoid Drivers	ENG	PDF	734 KB
Safety and Security Documentation
Használati útmutató	HUN	PDF	71 KB
Safety Manual	ENG	PDF	597 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-RCI-Ex1

CAD	Nyelv	Fájltípus	Fájlméret
CAD 3-D / CAD 3-D	ALL	STP	2510 KB
CAE
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	75 KB

Approvals: KFD2-RCI-Ex1

Certificates	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
CESI IECEx Certificate of Conformity	IECEx CES 09.0008	ALL	LINK	---
Canada FM	CoC 3037174C	ALL	PDF	52 KB
Europe CESI ATEX Category (1) GD	CESI 09 ATEX 037	ALL	PDF	989 KB
Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3	PF 09 CERT 1438 X	ALL	PDF	197 KB
USA FM	CoC 3037174	ALL	PDF	52 KB
exida Functional Safety Assessment	P+F 0905-35R1-C R015 V1R0	ALL	PDF	599 KB
exida Functional Safety Assessment	P+F 08-07-21 R033 V1R0	ALL	PDF	119 KB
Control Drawings
Control drawing FM / Control drawing FM		ALL	PDF	111 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0906B	ALL	PDF	54 KB

Kapcsolódó termékek: KFD2-RCI-Ex1

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

Ugrás

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.