Vibration sensor VIM32PL-E1AC8-0RE-IO-1V1401

Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Vibration acceleration in g (rms) acc. to DIN ISO 10816/20816
IO-Link Interface for process data, parameterization and diagnosis
Switching output and current output parameterizable
Additional temperature value output
Rugged stainless steel housing

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok VIM32PL-E1AC8-0RE-IO-1V1401

Termék leírása
Vibration sensor with IO-Link and programmable switching output or analog current output

General specifications
Type		Vibration sensor
Measuring technology		MEMS capacitive
Series		Performance Line
Measured variable		Vibration velocity Vibration acceleration Temperature
Measuring range
	Vibration velocity	0 ... 128 mm/s
	Vibration acceleration	0 ... 10 g rms
	Temperature	-40 ... 85 °C (-40 ... 185 °F)
Measurement accuracy		Vibration velocity: ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s Vibration acceleration: ± 0.01 g (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Resolution		Vibration velocity: 0.01 mm/s Vibration acceleration: 0.01 g
Frequency range		10 ... 1000 Hz
Averaging time		for v-rms: 2 s for a-rms: 2 s
Sampling rate		8 kHz
Functional safety related parameters
MTTF_d		329 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Electrical specifications
Fusing		external fuse is required: 1 A , fast acting , 30 V DC
Operating voltage		18 ... 30 V DC
Current consumption		max. 700 mA
Power consumption		max. 21 W
Time delay before availability		≤ 1 s
Surge protection		up to 2 kV
Interface
Interface type		IO-Link (via C/Q = Pin 4)
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D
Process data		Input 16 Byte measurement channels: -rms value velocity - peak value acceleration - rms value acceleration - temperature per measurement channel: - measurement value 2 Byte - scaling 8 Bit - switching signals 2 Bit status data
Vendor ID		1 (0x0001)
Device ID		5308417 (0x510001)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		5 ms
SIO mode support		yes
Compatible master port type		Class A Class B (use 3-pole adapter or 3-wire cable)
Output 1
Output type		C/Q - Pin 4 in SIO mode (switching signal of the measured variable is programmable)
Switching function		Normally open/closed (NO/NC)
Operating current		≤ 100 mA
Short-circuit protection		yes
Output 2
Output type		I/Q - pin 2 (parameterizable as analog current output or switching signal) - I: analog output for the measured variable, current 4 ... 20 mA - Q: switching signal of the measured variable is parameterizable, PNP normally open
Switching function		Normally open/closed (NO/NC)
Operating current		≤ 120 mA for switching signal
Voltage drop		< 2 V
Output current		4 ... 20 mA at analog output
Load resistor		≤ 500 Ω at analog output
Short-circuit protection		yes
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation		DIN ISO 10816/20816
Approvals and certificates
UL approval
	Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
	Maximum permissible ambient temperature	max. 80 °C (max. 176 °F)
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		plug
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state
Connector
	Threading	M12
	Number of pins	4
Mass		approx. 100 g
Dimensions
	Length	72.5 mm
	Diameter	23.8 mm

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM32PL-E1AC8-0RE-IO-1V1401

Function

The vibration sensor determines the vibration quantity using rms (root meas square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.

The integrated IO-Link interface provides an optimal adaption to different applications through parameterization and process data transmission for condition monitoring.

The simple mounting allows for commissioning in any application.

Informative Literature: VIM32PL-E1AC8-0RE-IO-1V1401

Literature	Nyelv	Fájltípus	Fájlméret
Product Overview - Vibration Sensors	ENG	PDF	1351 KB
Application Report - Servicing Mobile Concrete Mixers According to Actual Needs	ENG	PDF	169 KB

Product Documentation: VIM32PL-E1AC8-0RE-IO-1V1401

Product information	Nyelv	Fájltípus	Fájlméret
Installation and user instructions for offline parameterization of IO-Link sensors	ENG	PDF	1788 KB
Brief Instructions
Instruction leaflet / Beipackzettel	ALL	PDF	252 KB
Safety and Security Documentation
Használati útmutató	HUN	PDF	148 KB
Manuals
Manual VIM3-IO- Vibration Sensors	ENG	PDF	2011 KB
Parameter Information
IO-Link Parameter Datasheet VIM32PL-E1AC8-0RE-IO-1V1401	ENG	PDF	645 KB

Design / Simulation: VIM32PL-E1AC8-0RE-IO-1V1401

CAD	Nyelv	Fájltípus	Fájlméret
CAD 3-D / CAD 3-D	ALL	STP	2534 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	87 KB

Approvals: VIM32PL-E1AC8-0RE-IO-1V1401

Certificates	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
IO-Link Manufacturer Declaration	CERT-6798	ALL	PDF	402 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)	DOC-6865	ALL	PDF	325 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6866	ALL	PDF	249 KB

Software: VIM32PL-E1AC8-0RE-IO-1V1401

Device Description Files/Drivers	Megjelenési információ	Fájltípus	Fájlméret
IODD for VIM32PL-A-0-01 / IODD für VIM32PL-A-0-01	V1.01.000 / 2024-09-17	ZIP	228 KB
DTM (Device Type Manager) Package for VIM3*-A--IO-*** vibration sensor / DTM (Device Type Manager) Package für VIM3-A--IO-**** Schwingungssensor	V1.0.0.6	ZIP	16546 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool	V1.00.006 / 2022-07-10	ZIP	96138 KB

Kapcsolódó termékek: VIM32PL-E1AC8-0RE-IO-1V1401

Accessories

	V1-G-0,6M-PUR-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable greyfa

	EMCAD-M08-1,25-M08-1,25/36 Mounting adapter
	EMC adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 8fa

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	MONAD-M08-1,25-M10-1,5/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	RSL3-CS-SC-M55P200 Protective rubber sleeve
	Protective rubber sleeve for VIM3* vibration sensors against ingress of moisture and mechanical effectsfa

	MONAD-M08-1,25-1,2Z-BSPT/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread NPT1/2", screw-in depth 24fa

	V1-G-BK2M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	V1-G-BK5M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	V1-G-BK10M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	IO-Link-Master02-USB IO-Link master
	IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa

	V1-G-BK0,6M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	MONAD-M08-1,25-M06-1,0/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M6 x 1.0, screw-in depth 10fa

	MONAD-M08-1,25-M10-1,5/8 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

	MAGAD-M08-1,25-MAG/36 Magnetic adapter
	Magnetic adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, holding force 35 kgfa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.