Vibration sensor VIM62PL-E0T16-0ME-I420V14

Extended temperature range
Screw-in thread for simple installation
Simple electrical commissioning
Rugged stainless steel housing
Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Detection of low frequency vibrations
Additional output with measured temperature value

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok VIM62PL-E0T16-0ME-I420V14

Termék leírása
Vibration sensor with analog current output and increased temperature resistance

General specifications
Type		Vibration sensor
Measuring technology		MEMS
Series		Performance Line
Measured variable		Vibration velocity Temperature
Measuring range
	Vibration velocity	0 ... 16 mm/s
	Temperature	-40 ... 125 °C (-40 ... 257 °F)
Measurement accuracy		± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Frequency range		1 ... 1000 Hz
Averaging time		for v-rms: 12 s
Electrical specifications
Fusing		external fuse is required: 3 A , semi-time-lag , 30 V DC
Operating voltage		10 ... 30 V DC
Current consumption		max. 50 mA
Power consumption		max. 750 mW
Time delay before availability		10 s (rms filter is calculated intially with measurement data before they are available at the output)
Surge protection		up to 2 kV
Output 1
Output type		analog output, current output of the vibration variable
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Output 2
Output type		analog output, current output of the temperature
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation		DIN ISO 10816/20816
Approvals and certificates
UL approval
	Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
	Maximum permissible ambient temperature	max. 60 °C (max. 140 °F)
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Measuring head temperature		-40 ... 125 °C (-40 ... 257 °F) directly at the mounting point
Storage temperature		-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Connection type		plug
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state
Connector
	Threading	M12
	Number of pins	4
Mass		approx. 200 g
Dimensions
	Length	82.35 mm
	Diameter	31 mm

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM62PL-E0T16-0ME-I420V14

Function

The vibration sensor determines the vibration quantity using rms (root meas square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.

Furthermore, the vibration sensor has an additional output for the output of the measured temperature value.

The sensor’s design is impressively robust against tough environmental conditions.

The stainless steel housing provides optimal protection against corrosion. The wide temperature range of the sensor enables reliable measured values even in harsh conditions.

The simple mounting allows for commissioning in any application.

Informative Literature: VIM62PL-E0T16-0ME-I420V14

Literature	Nyelv	Fájltípus	Fájlméret
Product Overview - Vibration Sensors	ENG	PDF	1351 KB

Product Documentation: VIM62PL-E0T16-0ME-I420V14

Brief Instructions	Nyelv	Fájltípus	Fájlméret
Instruction leaflet / Beipackzettel	ALL	PDF	252 KB
Safety and Security Documentation
Használati útmutató	HUN	PDF	148 KB
Manuals
Manual VIM6*-Vibration Sensors	ENG	PDF	2498 KB

Design / Simulation: VIM62PL-E0T16-0ME-I420V14

CAD	Nyelv	Fájltípus	Fájlméret
CAD 3-D / CAD 3-D	ALL	STP	1973 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	67 KB

Approvals: VIM62PL-E0T16-0ME-I420V14

Certificates	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
Canada, USA UL Ordinary Location	E468231	ALL	PDF	610 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-5277A	ALL	PDF	324 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5593A	ALL	PDF	248 KB

Kapcsolódó termékek: VIM62PL-E0T16-0ME-I420V14

Accessories

	V1-G-3M-PUR-ABG0 Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable grey, shieldedfa

	RSL6-CS-SC-M55P200 Protective rubber sleeve
	Protective rubber sleeve for VIM6* vibration sensors against ingress of moisture and mechanical effectsfa

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	MONAD-M08-1,25-M10-1,5/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	MONAD-M08-1,25-1,2Z-BSPT/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread NPT1/2", screw-in depth 24fa

	EMCAD-M08-1,25-M08-1,25/36 Mounting adapter
	EMC adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 8fa

	V1-G-BK5M-PUR-U/ABG0 Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, shielded, UL approved, drag chain suitablefa

	MONAD-M08-1,25-M06-1,0/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M6 x 1.0, screw-in depth 10fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

	MAGAD-M08-1,25-MAG/36 Magnetic adapter
	Magnetic adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, holding force 35 kgfa

	ICA-AI-I/U-IO-V1 IO-Link converter
	IO-Link converter with analog input (current/voltage)fa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.