Software PACTware IO-Link Connection Wizard

For all sensors with IO-Link interface
Automatic detection of the connected USB-IO-Link master and IO-Link sensor
Independent PACTware poject setup and connection to the IO-Link sensor with just one double-click

Technical Data
Details
Software
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok PACTware IO-Link Connection Wizard

Termék leírása
Add-In for PACTware

Software
Software requirements		PACTware Version 4.1 or higher or PACTware Version 5.0.2.33 or higher
Operating system		Microsoft Windows 7 (32 and 64 Bit) Microsoft Windows 8 (32 and 64 Bit) Microsoft Windows 10 (32 und 64 Bit)
Operating conditions		Supports Pepperl+Fuchs IO-Link master02 USB (item number 304074) Supports all sensors with IO-Link interface via their IODD and most Pepperl+Fuchs sensors with IO-Link interface additionally via their DTM.

Classifications

System	Classcode
ECLASS 13.0	27242501
ECLASS 12.0	27242501
ECLASS 11.0	27242501
ECLASS 10.0.1	27242501
ECLASS 9.0	27242501
ECLASS 8.0	27242501
ECLASS 5.1	27242501
ETIM 9.0	EC000809
ETIM 8.0	EC000809
ETIM 7.0	EC000809
ETIM 6.0	EC000809
ETIM 5.0	EC000809
UNSPSC 12.1	43232901

Details: PACTware IO-Link Connection Wizard

Function

The Pepperl+Fuchs Connection Wizard is a supplement to the PACTware configuration tool. Double-click the wizard icon to automatically start the latest PACTware version installed on the PC. The IO-Link USB master connected to the PC and the sensor to be parameterized are then automatically detected by the wizard. The corresponding driver components such as DTM or IODD are loaded into the PACTware project. Finally, the wizard establishes communication to the connected sensor. This provides quick, direct access to sensor parameters.