Power Supply KFA6-STR-1.24.4
- 115/230 V AC supply
- Output 24 V DC, 4 A
- Fused output
- Power Rail connection
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok KFA6-STR-1.24.4
| Termék leírása |
|---|
| Electric power supply; removable terminals; supply voltage 92 V ... 265 V AC; output voltage 24 V DC, 4 A; suitable for Power Rail supply |
| Supply | ||
|---|---|---|
| Connection | terminals 1(PE), 2 (L1), 3 (N) | |
| Rated voltage | 92 ... 265 V AC , 47 ... 63 Hz | |
| Rated current | 2.1 ... 0.84 A | |
| Fusing | back-up fuse : B characteristic: 16 A B characteristic: 10 A C characteristic: 6 A |
|
| Failure override time | > 75 ms / 230 V AC ; 5 ms / 115 V AC | |
| Output | ||
| Connection | terminals 4+, 6- | |
| Current | 0 ... 4 A , Power Rail limiting by means of fuse 4 AT , electron. limitation typ. 4.6 A | |
| Output current | max. 4 A | |
| Output voltage | 24 V DC | |
| Ripple | < 100 mV ss | |
| Efficiency | typ. 87 % | |
| Voltage limitation | < 28 V DC | |
| Galvanic isolation | ||
| Power supply/Output | for 253 V AC design insulation voltage | |
| Indicators/settings | ||
| Display elements | LED | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 55011:2009+A1:2010 , EN 61000-3-2:2014 , EN 61000-3-3:2013 , EN 61000-6-1:2007 , EN 61000-6-2:2005 , EN 61000-6-3:2007+A1:2011 , EN 61000-6-4:2007+A1:2011 | |
| Low voltage | ||
| Directive 2014/35/EU | EN 61010-1:2010 | |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | self-opening connection terminals | |
| Core cross section | max. 2 x 2.5 mm2 | |
| Mass | approx. 800 g | |
| Dimensions | 140 x 101 x 114 mm (5.5 x 4.0 x 4.5 inch) (W x H x D) | |
| Height | 101 mm | |
| Width | 140 mm | |
| Depth | 114 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210119 |
| ECLASS 12.0 | 27210119 |
| ECLASS 11.0 | 27210119 |
| ECLASS 10.0.1 | 27210119 |
| ECLASS 9.0 | 27210119 |
| ECLASS 8.0 | 27210119 |
| ECLASS 5.1 | 27210119 |
| ETIM 9.0 | EC002653 |
| ETIM 8.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| ETIM 6.0 | EC002653 |
| ETIM 5.0 | EC002542 |
| UNSPSC 12.1 | 39121004 |
Details: KFA6-STR-1.24.4
Function
This regulated power supply provides 24 V DC, at 4 A. It features removable terminals, LED fault indication, and mounts directly on the Power Rail.
Designed with a replaceable fuse and LED, it will provide a green visual indication for normal operation or a flashing red indication if a fault occurs.
Attention: Ignoring the safety instructions (i. e., touching hot sections when the device is open, handling malpractices) can be extremely dangerous.
When exceeding the values stated in the technical data, there is a danger of overheating. As a result, the operation of the power supply and its electrical safety may be impaired.
Before starting installation or service, switch mains off. Do not plug or unplug powered!
Informative Literature: KFA6-STR-1.24.4
| Literature | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage | ENG | 566 KB | |
| Application Report - Generating Electricity in Coal-Fired Power Plants | ENG | 412 KB | |
| Application Report - Sand Trap and Preliminary Sedimentation Stage | ENG | 448 KB | |
| Application Report - Screening Systems in Sewage Treatment Plants | ENG | 577 KB |
Product Documentation: KFA6-STR-1.24.4
| Manuals | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Manual | ENG | 3685 KB |
Design / Simulation: KFA6-STR-1.24.4
| CAD | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 3772 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| EPLAN macro EDZ / EPLAN Makro EDZ | ALL | EDZ | 72 KB |
Approvals: KFA6-STR-1.24.4
| Declaration of Conformity | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2862B | ALL | 99 KB |
Kapcsolódó termékek: KFA6-STR-1.24.4
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.