Simulator IS01
- 1-channel
- Loop powered
- NAMUR sensor simulator and pulse generator
- Simulates line faults
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok IS01
| Supply | ||
|---|---|---|
| Connection | loop powered | |
| Indicators/settings | ||
| Control elements | slide switches | |
| Configuration | via slide switches | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 70 g | |
| Dimensions | 40 x 130 x 25 mm (1.6 x 5.1 x 1 inch) | |
| Height | 130 mm | |
| Width | 40 mm | |
| Length | 25 mm | |
| Construction type | gray ABS handheld housing | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | DMT 02 ATEX E 008 | |
| Marking |  II 1G EEx ia IIB T4 |
|
| Voltage | 16 V DC | |
| Current | 55 mA | |
| Power | 245 mW | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 19200504 |
| ECLASS 12.0 | 19200504 |
| ECLASS 11.0 | 19200504 |
| ECLASS 10.0.1 | 19200504 |
| ECLASS 9.0 | 19200504 |
| ECLASS 8.0 | 27279211 |
| ECLASS 5.1 | 27279211 |
| ETIM 9.0 | EC000305 |
| ETIM 8.0 | EC000305 |
| ETIM 7.0 | EC000305 |
| ETIM 6.0 | EC000305 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 41113642 |
Details: IS01
Function
This simulator imitates a NAMUR proximity sensor by implementing a three-position switch. A three-position switch facilitates the selection of various test conditions.
The first position (NAMUR voltage) simulates a 1 kΩ resistive load, while the second position (sensor static) offers various sensor-damping conditions, including a short circuit simulation. The third switch position (sensor dynamic) offers the user several frequency settings between 0.1 Hz ... 1 kHz using a rectangular wave with a 50 % duty cycle.
Product Documentation: IS01
| Safety and Security Documentation | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Instruction manual | ENG | 121 KB |
Approvals: IS01
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| Europe DMT ATEX Category (1) G | DMT 02 ATEX E 008 | ALL | 118 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-3358AHUN | HUN | 182 KB | |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.