Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Termék leírása |
---|
Inductive transmitter system |
Nominal ratings | ||
---|---|---|
Operating voltage | 24 V DC ± 10 % | |
Number of signal channels | 8 | |
Signal transfer direction | from secondary side to primary side | |
Reverse polarity protection | reverse polarity protected | |
Current consumption | max. 1000 mA | |
Functional safety related parameters | ||
MTTFd | 245 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Switching state | 8 x LED, yellow | |
Transfer indicator | LED, green | |
Input | ||
Number | 1 | |
Input type | Activation input signal level: ≥ 15 V = active, ≤ 3 V inactive |
|
Input current | ≤ 1 mA | |
Internal resistor | ≥ 15 kΩ | |
Output | ||
Output type | 1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched high) , overload and short-circuit resistant | |
Voltage drop | ≤ 2.5 V | |
Load current | max. 50 mA | |
Response time | ≤ 200 ms ( static operation , the transmission heads stand opposite to each other ) | |
Compliance with standards and directives | ||
Directive conformity | ||
EMC Directive 89/336/EEC | EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999 | |
Standard conformity | ||
Standards | EN IEC 60947-5-2 | |
Approvals and certificates | ||
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Material | ||
Housing | PA 66-FR | |
Installation | DIN rail mounting | |
Mass | 106 g | |
General information | ||
Note | Maximum cable length between WIS module and WIS transmitter must not exceed 5 m. |
System | Classcode |
---|---|
ECLASS 13.0 | 27274090 |
ECLASS 12.0 | 27274090 |
ECLASS 11.0 | 27270190 |
ECLASS 10.0.1 | 27270190 |
ECLASS 9.0 | 27270190 |
ECLASS 8.0 | 27270190 |
ECLASS 5.1 | 27270190 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Literature | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|
Application Report - Non-Contact, Wear-Free Signal and Power Transmission | ENG | 314 KB |
CAD | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 4237 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 27 KB |
Matching System Components | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|