Trip amplifier S1SD-1AI-1R

1-channel signal conditioner
24 V DC supply
Input bipolar current and voltage sources
Input 2-wire and 3-wire transmitters
Relay contact output
Restart inhibit
One-shot function
Configurable by DIP switches and software
Connection via screw terminals

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok S1SD-1AI-1R

General specifications
Signal type		Analog input
Supply
Connection		Power Bus or terminals 1-, 2+
Rated voltage		16.8 ... 31.2 V DC
Power dissipation		0.6 W
Power consumption		0.8 W
Interface
Programming interface		programming socket
Input
Connection side		field side
Transmission range		linearity range: unipolar -1 ... 110 % bipolar -110 ... 110 %
Input I
	Connection	terminals 5, 6, 7-
	Input signal	0/4 ... 20 mA , 0/2 ... 10 mA , ± 10 mA, ± 20 mA , max. 50 mA
	Input resistance	≤ 25 Ω
Input II
	Connection	terminals 7-, 8+
	Input signal	0/1 ... 5 V , 0/2 ... 10 V , ± 5 V , ± 10 V , max. 30 V
	Input resistance	> 1 MΩ
Input III
	Connection	terminals 5+, 6-
	Input signal	0/4 ... 20 mA
	Available voltage	16 V at 20 mA
	Open circuit voltage/short-circuit current	≤ 22 V / 30 mA
Input IV
	Connection	terminals 5, 7
	Input type	reset restart inhibit
Output
Connection side		control side
Connection		terminals 3, 4:
Output		signal, relay
Contact loading		253 V AC/2 A/cos φ > 0.7; 126.5 V AC/2 A/cos φ > 0.7; 30 V DC/2 A resistive load
Minimum switch current		2 mA / 24 V DC
Energized/De-energized delay		≤ 20 ms / ≤ 20 ms
Mechanical life		10⁷ switching cycles
Transfer characteristics
Accuracy		max. 0.1 % of full-scale value
Influence of ambient temperature		< 100 ppm/K of full-scale value
Galvanic isolation
Output/power supply		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuits		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Display elements		LEDs
Control elements		DIP switch keys
Configuration		via DIP switches via keys via software
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2001
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Core cross section		0.5 ... 2.5 mm² (20 ... 14 AWG)
Mass		approx. 70 g
Dimensions		6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
	Height	97 mm
	Width	6.2 mm
	Depth	107 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210122
ECLASS 12.0	27210122
ECLASS 11.0	27210122
ECLASS 10.0.1	27210122
ECLASS 9.0	27210122
ECLASS 8.0	27210122
ECLASS 5.1	27210122
ETIM 9.0	EC002654
ETIM 8.0	EC002654
ETIM 7.0	EC002654
ETIM 6.0	EC002654
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: S1SD-1AI-1R

Function

This signal conditioner provides the galvanic isolation between field circuits and control circuits.

The device supplies 2-wire and 3-wire transmitters

The device has an input for bipolar current and voltage sources.

The device actuates a relay contact output when it reaches the adjusted limit value.

The device is easily configured by the use of DIP switches or software.

The device has an adjustable on delay, an off delay, or an one-shot function for the relay contact output.

The teach-in function can be used to teach in the limit value.

The device can be powered via terminals or Power Bus.

Informative Literature: S1SD-1AI-1R

Literature	Nyelv	Fájltípus	Fájlméret
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Product Overview SC-System	ENG	PDF	456 KB
Tender text
Tender text	ENG	D81	6 KB

Product Documentation: S1SD-1AI-1R

Brief Instructions	Nyelv	Fájltípus	Fájlméret
Brief instructions	ENG	PDF	251 KB
Safety and Security Documentation
Használati útmutató	HUN	PDF	120 KB
Manuals
System Manual	ENG	PDF	2706 KB

Design / Simulation: S1SD-1AI-1R

CAD	Nyelv	Fájltípus	Fájlméret
CAD 3-D / CAD 3-D	ALL	STP	4814 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macros SC-System devices (EDZ) / EPLAN-Makros SC-System-Geräte (EDZ)	ALL	ZIP	4082 KB

Approvals: S1SD-1AI-1R

Declaration of Conformity	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
EU Declaration of Conformity (P+F)	TDOC-2695CHUN	HUN	PDF	172 KB

Software: S1SD-1AI-1R

Software Tools	Megjelenési információ	Fájltípus	Fájlméret
Configuration software for SC-System: SC-Config / Konfigurations Software für SC-System: SC-Config	3.4.0	ZIP	---

Kapcsolódó termékek: S1SD-1AI-1R

Matching System Components

	S1SD-2PF Power Feed Module
	Interface for Power Bus, Supply current 3 A, LED status indication, Connection via screw terminalspa

	S-ADP-USB Adapter with USB Interface
	Isolated USB interface cable, Used with SC-System devices, Configurable via PCpa

	POWERBUS-SETL5.250 Power Bus for DIN Mouning Rail
	Bus carrier with bus PCB for 35 mm DIN mounting rail, height 7.5 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa

	POWERBUS-SETH5.250 Power Bus for DIN Mouning Rail
	Bus carrier with bus PCB for 35 mm DIN mounting rail, height 15 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa

	POWERBUS-COV.250 Cover for DIN Mounting Rail
	Cover for DIN mounting rail, Suitable for Power Bus, Standard length 250 mm (9.84 inch), simple to customize to application space, Packaging unit: 5 piecespa

	POWERBUS-CAP End Cap for Power Bus
	Fixing of the bus carrier with bus PCB in the DIN mounting rail, Termination of DIN mounting rail, Suitable for Power Bus, Packaging unit: 5 pieces left, 5 pieces rightpa

General Notes Relating to Pepperl+Fuchs Product Information

Gyorshivatkozások

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.