Ultrasonic sensor UB500-30GM-E5-V15

Switching output
5 different output functions can be set
Program input
Synchronization options
Deactivation option
Temperature compensation
Insensitive to compressed air

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok UB500-30GM-E5-V15

Termék leírása
Single head system

General specifications
Sensing range		30 ... 500 mm
Adjustment range		50 ... 500 mm
Dead band		0 ... 30 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 380 kHz
Response delay		approx. 50 ms
Indicators/operating means
LED green		solid: Power-on flashing: program function object detected
LED yellow		solid: switching state switch output flashing: program function
LED red		normal operation: "fault" program function: no object detected
Electrical specifications
Operating voltage		10 ... 30 V DC , ripple 10 %_SS
No-load supply current		≤ 50 mA
Input/Output
Synchronization		bi-directional 0 level -U_B...+1 V 1 level: +4 V...+U_B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency
	Common mode operation	max. 95 Hz
	Multiplex operation	≤ 95 Hz / n , n = number of sensors , n ≤ 5
Input
Input type		1 program input, operating range 1: -U_B ... +1 V, operating range 2: +4 V ... +U_B input impedance: > 4.7 kΩ; program pulse: ≥ 1 s
Output
Output type		1 switch output PNP , Normally open/closed , programmable
Rated operating current		200 mA , short-circuit/overload protected
Voltage drop		≤ 2.5 V
Repeat accuracy		≤ 0.5 % of switching point
Switching frequency		≤ 10 Hz
Range hysteresis		1 % of the set operating distance
Temperature influence		< 2 % of far switch point
Compliance with standards and directives
Standard conformity
	Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 5-pin
Degree of protection		IP65
Material
	Housing	nickel plated brass; plastic components: PBT
	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass		135 g
Dimensions
	Length	94 mm
	Diameter	30 mm
Factory settings
Output		Switch point A1: 60 mm Switch point A2: 525 mm output function: Window mode output behavior: NO contact

Classifications

System	Classcode
ECLASS 13.0	27272803
ECLASS 12.0	27272803
ECLASS 11.0	27272803
ECLASS 10.0.1	27272803
ECLASS 9.0	27272803
ECLASS 8.0	27272803
ECLASS 5.1	27272803
ETIM 9.0	EC001849
ETIM 8.0	EC001849
ETIM 7.0	EC001849
ETIM 6.0	EC001849
ETIM 5.0	EC001849
UNSPSC 12.1	41111960

Details: UB500-30GM-E5-V15

Informative Literature: UB500-30GM-E5-V15

Literature	Nyelv	Fájltípus	Fájlméret
/doct/tdoct9470__eng.pdf	ENG	PDF	452 KB
Application Report - Rugged Collision Protection for Cleaning Robots	ENG	PDF	313 KB

Product Documentation: UB500-30GM-E5-V15

Brief Instructions	Nyelv	Fájltípus	Fájlméret
Instruction leaflet / Beipackzettel	ALL	PDF	383 KB
Safety and Security Documentation
Használati útmutató	HUN	PDF	147 KB

Design / Simulation: UB500-30GM-E5-V15

CAD	Nyelv	Fájltípus	Fájlméret
CAD 3-D / CAD 3-D	ALL	STP	43 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	69 KB

Approvals: UB500-30GM-E5-V15

Certificates	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
Canada USA UL Ordinary Location	UL-US-2140156-4 / UL-CA-2133660-4	ALL	PDF	284 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1963C	ALL	PDF	47 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5435	ALL	PDF	40 KB

Kapcsolódó termékek: UB500-30GM-E5-V15

Accessories

	BF 30 Mounting flange
	Mounting flange, 30 mmfa

	BF 5-30 Mounting flange
	Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa

	V15-G-2M-PVC Female cordset
	Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa

	V15-W-2M-PUR Female cordset
	Female cordset single-ended M12 angled A-coded, 5-pin, PUR cable greyfa

	BF 30-F Mounting flange
	Plastic mounting adapter, 30 mmfa

	UB-PROG2 Programming unit
	Programming unitfa

	UVW90-M30 Ultrasonic -deflector
	Ultrasonic -deflector, Universal mounting possibilities, 90° sound deflection for difficult installation circumstances, Focussing effectfa

	UVW90-K30 Ultrasonic -deflector
	Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa

	M30K-VE Mounting aid
	Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.