Absolute rotary encoder ENA58IL-R15YY5-1212SG1-RBY:01
- SSI interface
- Recessed hollow shaft
- Resolution: 12 singleturn, 12 bit multiturn
- Free of wear magnetic sampling
- High resolution and accuracy
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne ENA58IL-R15YY5-1212SG1-RBY:01
| General specifications | ||
|---|---|---|
| Detection type | magnetic sampling | |
| Device type | Absolute rotary encoder | |
| Linearity error | ≤ ± 0.1 ° | |
| UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. | |
| Electrical specifications | ||
| Operating voltage | 4.5 ... 30 V | |
| No-load supply current | typ. 50 mA | |
| Power consumption | approx. 1.5 W | |
| Time delay before availability | < 450 ms | |
| Output code | Gray code | |
| Code course (counting direction) | cw ascending | |
| Interface | ||
| Interface type | SSI | |
| Resolution | ||
| Single turn | 12 Bit | |
| Multiturn | 12 Bit | |
| Transfer rate | 0.1 ... 2 MBit/s | |
| Cycle time | < 100 µs | |
| Standard conformity | RS 422 | |
| Connection | ||
| Fixed cable with plug | cable ∅8 mm, 8 x 2 x 0.14 mm2 , length 300 mm , M12 connector, 8-pin | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP65 |
|
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 200 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 1000 Hz | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. | |
| Ambient conditions | ||
| Operating temperature | cable, movable installation: -5 ... 70 °C (23 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 98 % , no moisture condensation | |
| Mechanical specifications | ||
| Material | ||
| Housing | nickel-plated steel , painted | |
| Flange | Aluminum | |
| Shaft | Stainless steel | |
| Mass | approx. 300 g | |
| Rotational speed | max. 12000 min -1 | |
| Moment of inertia | 50 gcm2 | |
| Starting torque | < 5 Ncm | |
| Shaft load | ||
| Axial | 24 N | |
| Radial | 198 N | |
| Angle offset | ± 0.9 ° | |
| Axial offset | ± 0.3 mm static | |
| Radial offset | ± 0.5 mm static | |
| General information | ||
| Scope of delivery | Spring plate is enclosed as accessory | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270502 |
| ECLASS 12.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 10.0.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 5.1 | 27270502 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details: ENA58IL-R15YY5-1212SG1-RBY:01
Function
The ENA58IL series are high precision encoders with internal magnetic sampling.
This multiturn absolute encoder transmits a position value corresponding to the shaft setting via the SSI interface (Synchronous Serial Interface).
The control module sends a start sequence to the absolute encoder to obtain the position data. The rotary encoder then sends the position data synchronous to the cycles of the control module.
Informative Literature: ENA58IL-R15YY5-1212SG1-RBY:01
| Literature | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Application Report - Precise Positioning in Filling Plants | ENG | 225 KB | |
| Application Report - Synchronous Roller Movement in Printing Presses | ENG | 198 KB |
Approvals: ENA58IL-R15YY5-1212SG1-RBY:01
| Declaration of Conformity | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-7360 | ALL | 317 KB |
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.