Wsparcie Czujników Przemysłowych
Wsparcie Ochrony przed wybuchem
Automatyzacja Produkcji

Light grid LGS100

LGS100
  • Automation light grid
  • Optical resolution 100 mm
  • Super-fast object detection, even with 3-way beam crossover
  • Software-free adjustment of height monitoring
  • Object identification using integrated object recognition
  • IO-Link interface for service and process data
  • Optional temperature range to
    -30 °C

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:


Dane techniczne  LGS100

Opis produktu
Automation light grid with beam spacing of 100 mm, IO-Link interface, push-pull output, fixed cable with M12 plug
General specifications
Effective detection rangeStandard : 0.3 ... 6 m
Option /35: 0.5 ... 8 m
When beam crossover is activated, the detection range starts at 0.6 m
Threshold detection rangeStandard : 7.5 m
Option /35: 10 m
Light sourceIRED
Light typemodulated infrared light , 850 nm
Field heightsee Table 1, max. 3000 mm
Beam crossoverFactory setting: three beam crossing, deactivateable
Beam blankingadjustable max. 2 fixed suppressible beam areas (blanking)
Beam spacing100 mm
Number of beamssee Table 1, max. 31
Operating modeEmitter: Emitter power adjustable in two ranges
Optical resolutionwithout beam crossover: 100 mm
with beam crossover: 50 mm with in 25%  and  75% of the range
Opening angle10 °
Ambient light limit> 50000 Lux (if external light source is outside the opening angle)
Functional safety related parameters
MTTFd78 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)60 %
Indicators/operating means
Operation indicatorPower on: LED green, statically lit , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicatorEmitter: Yellow LED, illuminates at high emitting power, off at low emitting power
Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the operating reserve (4 Hz)
Error message: Yellow LED flashes (8 Hz) in emitter and receiver
Control elementsReceiver: 2 touch buttons for programming
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Electrical specifications
Operating voltage18 ... 30 V DC
Ripple10 %
No-load supply currentEmitter ≤: 50 mA
Receiver: ≤ 150 mA (without outputs)
Time delay before availabilitysee Table 1, max. 1.1 s
Interface
Interface typeIO-Link
ProtocolIO-Link V1.0
ModeCOM2 (38.4 kBit/s)
Input
Test inputEmitter switch-off with +UB or 0 V at pin 4 (emitter)
Function inputRange input activation from 1.6 m (or 2 m in case of option /35) with +UB or 0 V on pin 2 (emitter)
Teach-In input for programming on pin 8 (receiver)
Output
Stability alarm outputStability Control (SC) 1 PNP, short-circuit protected, reverse polarity protected on pin 2 (receiver)
Switching typeFactory setting: dark on , Switchable to light-on mode
Signal outputSwitching output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver),
Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver)
Switching thresholdFactory setting: The signal tracking for the threshold value is deactivated, increasing the optical resolution by a maximum of 4 mm; switchable to active signal tracking
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 2 V DC
Switching frequencysee Table 1, max. 135 Hz
Response timesee Table 1, max. 6 ms
Timer functionOff-delay programmable from 0 ... 1.25 s in 5 ms steps (adjustment via IO-Link only)
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Approvals and certificates
Protection classIII ( IEC 61140 )
UL approvalcULus Listed
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperatureStandard : -10 ... 60 °C (14 ... 140 °F)
Option /146: -30 ... 60 °C (-22 ... 140 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Mechanical specifications
Conductor cross sectionmin. 0.25 mm2
Housing length Lsee Table 1, max. 3160 mm
Degree of protectionIP67
ConnectionEmitter: connecting cable with 4-pin, M12 x 1 connector , 330 mm total length
Receiver: connecting cable with 8-pin, M12 x 1 connector , 350 mm total length
Material
Housingextruded aluminum section , Silver anodized
Optical facePlastic pane , Polycarbonate
Masssee Table 1, max. 1650 g (per profile)
Dimensions
Width20 mm
Depth30.5 mm
Cable lengthmax. 30 m

Classifications

SystemClasscode
ECLASS 13.027270910
ECLASS 12.027270910
ECLASS 11.027270910
ECLASS 10.0.127270910
ECLASS 9.027270910
ECLASS 8.027270910
ECLASS 5.127270910
ETIM 9.0EC002549
ETIM 8.0EC002549
ETIM 7.0EC002549
ETIM 6.0EC002549
ETIM 5.0EC002549
UNSPSC 12.139121528

Details: LGS100

Function

The LGS automation light grid series detects objects ranging in size from small to large. The very slender light grids have a modular design and come in different beam spacings and field heights. All signal evaluation takes place inside the unit. The lightweight systems can be integrated in their surroundings in a well-designed configuration, which means that machines and plants in temperature ranges between -30 °C ... +60 °C can be designed more compactly.

Informative Literature: LGS100

Language Selection:
LiteratureJęzykTyp plikuRozmiar pliku
Brochure - Automation Light Grids: LGS and LGM SeriesENGPDF1965 KB

Product Documentation: LGS100

Language Selection:
Product informationJęzykTyp plikuRozmiar pliku
Installation and user instructions for offline parameterization of IO-Link sensorsENGPDF1788 KB
Manuals
Manual automation light grid LGSENGPDF3054 KB

Design / Simulation: LGS100

Language Selection:
CADJęzykTyp plikuRozmiar pliku
3-D model, 1200 mm / 3-D-Modell, 1200 mmALLSTP1815 KB
3-D model, 1500 mm / 3-D-Modell, 1500 mmALLSTP1788 KB
3-D model, 1800 mm / 3-D-Modell, 1800 mmALLSTP1771 KB
3-D model, 2100 mm / 3-D-Modell, 2100 mmALLSTP1769 KB
3-D model, 2400 mm / 3-D-Modell, 2400 mmALLSTP1760 KB
3-D model, 2700 mm / 3-D-Modell, 2700 mmALLSTP1756 KB
3-D model, 300 mm / 3-D-Modell, 300 mmALLSTP1787 KB
3-D model, 3000 mm / 3-D-Modell, 3000 mmALLSTP1755 KB
3-D model, 600 mm / 3-D-Modell, 600 mmALLSTP1781 KB
3-D model, 900 mm / 3-D-Modell, 900 mmALLSTP1791 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ67 KB

Approvals: LGS100

Language Selection:
CertificatesNr. certyfikatuJęzykTyp plikuRozmiar pliku
Canada USA UL Ordinary LocationE87056ALLLINK---
Canada USA UL Ordinary LocationUL-CA-2134531-0 / UL-US-2141152-0ALLPDF544 KB
IO-Link Manufacturer DeclarationPF 13 CERT 2629ALLPDF230 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0227CALLPDF304 KB

Software: LGS100

Language Selection:
Device Description Files/DriversInformacja o wersjiTyp plikuRozmiar pliku
IODD for LGS series / IODD für LGS-SerieV1.03.004 / 2018-08-15ZIP2664 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolV1.00.006 / 2022-07-10ZIP96138 KB

Produkty powiązane: LGS100

Accessories

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

EtherNet/IP IO-Link master with 8 inputs/outputsfa

PROFINET IO IO-Link master with 8 inputs/outputsfa
Swivel Bracketfa
Attachment aid for light grid series LGS/LGMfa
Quick clamp and adjustment systemfa
Double-ended cordset, M12 to M12, with EMC filter, 8-pin, PVC cable, Knurled nut suitable for tool assembly, Immunity to vibration, with mechanical latching, Flame resistant cable, Halogen-free, Degree of protection IP67fa
Mounting bracket including adjustmentfa
Mounting bracket including adjustment (with loose bearing)fa
Mounting bracket including adjustmentfa
Profile alignment aid; simplified alignment of the SLCS and SLCT safety light curtainsfa
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa
Female cordset, M12, 8-pin, PUR-cablefa
Female cordset, M12, 8-pin, PUR-cablefa
Female cordset, M12, 8-pin, PUR-cablefa
Cordset M12 socket straight A-coded 8-pin to M12 plug straight A-coded 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Cordset, LGS25 light grids to ICE modules/WIS 2, M12 to M12, PUR cable, 4-pinfa
Ethernet IO-Link module with 8 inputs/outputsfa
Ethernet IO-Link module with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Uwagi ogólne dotyczące informacji o produktach firmy Pepperl+Fuchs

Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
phone +48 22 256 9770

© 2024 Wszelkie prawa zastrzeżone

Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.