Light grid LGM17

Measuring automation light grid with switching output
Optical resolution 17 mm
Super-fast object detection, even with 3-way beam crossover
Object identification using integrated object recognition
IO-Link interface for service and process data
Temperature range to -30 °C
Output of a measured value, can be selected from a number of measuring functions

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Produkty powiązane

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:

Dane techniczne LGM17

Opis produktu
Measuring automation light grid with beam spacing of 17 mm, IO-Link interface, push-pull output, fixed cable with M12 plug

General specifications
Effective detection range		Standard : 0.3 ... 6 m
Threshold detection range		7.5 m
Light source		IRED
Light type		modulated infrared light , 850 nm
Field height		see Table 1, max. 3200 mm
Beam crossover		Factory setting: three beam crossing, deactivateable
Beam blanking		adjustable max. 2 fixed suppressible beam areas (blanking)
Beam spacing		16.67 mm
Number of beams		see Table 1, max. 193
Operating mode		Emitter: Emitter power adjustable in two ranges
Optical resolution		without beam crossover: 17 mm with beam crossover: 8.5 mm with in 25% and 75% of the range
Opening angle		10 °
Ambient light limit		> 50000 Lux (if external light source is outside the opening angle)
Functional safety related parameters
MTTF_d		25 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		60 %
Indicators/operating means
Operation indicator		LED green: constantly on - power-on double pulse flashing (0.8 Hz) - undervoltage flashing (4 Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Status indicator		Emitter: LED yellow constantly on - high emitter power constantly off - low emitter power flashing (8 Hz) - error message Receiver: LED yellow: constantly on - object detected constantly off - no object detected flashing (4 Hz) - falling below operating reserve flashing (8 Hz) - error message
Control elements		Receiver: 2 touch buttons for programming
Electrical specifications
Operating voltage		18 ... 30 V DC
Ripple		10 %
No-load supply current		Emitter ≤: 50 mA Receiver: ≤ 150 mA (without outputs)
Time delay before availability		see Table 1, max. 3 s
Interface
Interface type		IO-Link ( pin 4 )
IO-Link revision		1.0
Device ID		1050369 ... 1050400 ( 0x100701 ... 0x100720 )
COM-Mode		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
Process data width		16 bit
SIO mode support		yes
Input
Test input		Emitter switch-off with +UB or 0 V at pin 4 (emitter)
Function input		Range input activation from 1.6 m with +UB or 0 V on pin 2 (emitter) Teach-In input for parameterization on pin 8 (receiver)
Output
Stability alarm output		Stability Control (SC) 1 PNP, short-circuit protected, reverse polarity protected on pin 2 (receiver)
Switching type		Factory setting: dark on , Switchable to light-on mode
Signal output		Command interface: Pin 4 IO-Link interface C or used as switching output Q; 1 short-circuit proof reverse polarity protected push-pull output (receiver) Switch output: Pin 5 switching output Q; 1 short-circuit proof reverse polarity protected push-pull output (receiver) synchronized with pin 4
Switching threshold		Factory setting: The signal tracking for the threshold value is deactivated, increasing the optical resolution by a maximum of 4 mm; switchable to active signal tracking
Switching voltage		max. 30 V DC
Switching current		max. 100 mA
Voltage drop		≤ 2 V DC
Switching frequency		see Table 1, max. 129 Hz
Response time		see Table 1, max. 16 ms
Timer function		Off-delay programmable from 0 ... 1.25 s in 5 ms steps (adjustment via IO-Link only)
Conformity
Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Approvals and certificates
Protection class		III ( IEC 61140 )
UL approval		cULus Listed
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Storage temperature		-30 ... 70 °C (-22 ... 158 °F)
Mechanical specifications
Conductor cross section		min. 0.25 mm²
Housing length L		see Table 1, max. 3360 mm
Degree of protection		IP67
Connection		Emitter: connecting cable with 4-pin, M12 x 1 connector , 330 mm total length Receiver: connecting cable with 8-pin, M12 x 1 connector , 350 mm total length
Material
	Housing	extruded aluminum section , Silver anodized
	Optical face	Plastic pane , Polycarbonate
Mass		see Table 1, max. 1750 g (per profile)
Dimensions
	Width	20 mm
	Depth	30.5 mm
Cable length		max. 30 m

Classifications

System	Classcode
ECLASS 13.0	27270910
ECLASS 12.0	27270910
ECLASS 11.0	27270910
ECLASS 10.0.1	27270910
ECLASS 9.0	27270910
ECLASS 8.0	27270910
ECLASS 5.1	27270910
ETIM 9.0	EC002549
ETIM 8.0	EC002549
ETIM 7.0	EC002549
ETIM 6.0	EC002549
ETIM 5.0	EC002549
UNSPSC 12.1	39121528

Details: LGM17

Function

Automation light grids in the LGM Series are designed to measure small to large objects. The slimline light grids are modular in design and are available with various beam gaps and field heights. The entire signal evaluation process is carried out within the device. The lightweight systems can be integrated elegantly into their surroundings, from both a technical and a visual perspective. As a result, machines and plants operating in temperature ranges between -30 °C ... +60 °C can be designed to more compact dimensions.

Informative Literature: LGM17

Literature	Język	Typ pliku	Rozmiar pliku
Brochure - Automation Light Grids: LGS and LGM Series	ENG	PDF	1965 KB

Product Documentation: LGM17

Product information	Język	Typ pliku	Rozmiar pliku
Installation and user instructions for offline parameterization of IO-Link sensors	ENG	PDF	1788 KB
Brief Instructions
Brief Instructions - LGM series	ENG	PDF	1759 KB
Manuals
Manual Measuring Automation Light Grid LGM	ENG	PDF	6975 KB

Design / Simulation: LGM17

CAD	Język	Typ pliku	Rozmiar pliku
3-D model, 100 mm / 3-D-Modell, 100 mm	ALL	STP	3937 KB
3-D model, 1000 mm / 3-D-Modell, 1000 mm	ALL	STP	1801 KB
3-D model, 1100 mm / 3-D-Modell, 1100 mm	ALL	STP	1808 KB
3-D model, 1200 mm / 3-D-Modell, 1200 mm	ALL	STP	1815 KB
3-D model, 1300 mm / 3-D-Modell, 1300 mm	ALL	STP	1799 KB
3-D model, 1400 mm / 3-D-Modell, 1400 mm	ALL	STP	1799 KB
3-D model, 1500 mm / 3-D-Modell, 1500 mm	ALL	STP	1788 KB
3-D model, 1600 mm / 3-D-Modell, 1600 mm	ALL	STP	1787 KB
3-D model, 1700 mm / 3-D-Modell, 1700 mm	ALL	STP	1785 KB
3-D model, 1800 mm / 3-D-Modell, 1800 mm	ALL	STP	1771 KB
3-D model, 1900 mm / 3-D-Modell, 1900 mm	ALL	STP	1666 KB
3-D model, 200 mm / 3-D-Modell, 200 mm	ALL	STP	1779 KB
3-D model, 2000 mm / 3-D-Modell, 2000 mm	ALL	STP	1767 KB
3-D model, 2100 mm / 3-D-Modell, 2100 mm	ALL	STP	1769 KB
3-D model, 2200 mm / 3-D-Modell, 2200 mm	ALL	STP	1768 KB
3-D model, 2300 mm / 3-D-Modell, 2300 mm	ALL	STP	2881 KB
3-D model, 2400 mm / 3-D-Modell, 2400 mm	ALL	STP	1760 KB
3-D model, 2500 mm / 3-D-Modell, 2500 mm	ALL	STP	1756 KB
3-D model, 2600 mm / 3-D-Modell, 2600 mm	ALL	STP	1756 KB
3-D model, 2700 mm / 3-D-Modell, 2700 mm	ALL	STP	1756 KB
3-D model, 2800 mm / 3-D-Modell, 2800 mm	ALL	STP	2867 KB
3-D model, 2900 mm / 3-D-Modell, 2900 mm	ALL	STP	2885 KB
3-D model, 300 mm / 3-D-Modell, 300 mm	ALL	STP	1787 KB
3-D model, 3000 mm / 3-D-Modell, 3000 mm	ALL	STP	1755 KB
3-D model, 3100 mm / 3-D-Modell, 3100 mm	ALL	STP	1731 KB
3-D model, 3200 mm / 3-D-Modell, 3200 mm	ALL	STP	1733 KB
3-D model, 400 mm / 3-D-Modell, 400 mm	ALL	STP	3278 KB
3-D model, 500 mm / 3-D-Modell, 500 mm	ALL	STP	1784 KB
3-D model, 600 mm / 3-D-Modell, 600 mm	ALL	STP	1781 KB
3-D model, 700 mm / 3-D-Modell, 700 mm	ALL	STP	1782 KB
3-D model, 800 mm / 3-D-Modell, 800 mm	ALL	STP	1782 KB
3-D model, 900 mm / 3-D-Modell, 900 mm	ALL	STP	1791 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: LGM17

Certificates	Nr. certyfikatu	Język	Typ pliku	Rozmiar pliku
Canada USA UL Ordinary Location	E87056	ALL	LINK	---
Canada USA UL Ordinary Location	UL-CA-2134531-0 / UL-US-2141152-0	ALL	PDF	544 KB
IO-Link Manufacturer Declaration	PF 13 CERT 2915	ALL	PDF	36 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0227B	ALL	PDF	184 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0227C	ALL	PDF	304 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5336	ALL	PDF	228 KB

Software: LGM17

Device Description Files/Drivers	Informacja o wersji	Typ pliku	Rozmiar pliku
IODD for LGM series / IODD für LGM Serie	V1.01.000 / 2018-08-15	ZIP	2631 KB
Device DTM for LGM IO-Link sensors / Geräte-DTM für LGM IO-Link Sensoren	V1.0.2.5	ZIP	3905 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool	V1.00.006 / 2022-07-10	ZIP	96138 KB

Produkty powiązane: LGM17

Accessories

	V1-G-BK5M-PUR-U Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

	V1-G-BK10M-PUR-U Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

	ICE2-8IOL-G65L-V1D IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputsfa

	ICE3-8IOL-G65L-V1D IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputsfa

	V19-G-EMV-BK0,3M-PVC-V19-G Connection cable
	Double-ended cordset, M12 to M12, with EMC filter, 8-pin, PVC cable, Knurled nut suitable for tool assembly, Immunity to vibration, with mechanical latching, Flame resistant cable, Halogen-free, Degree of protection IP67fa

	OMH-SLCT-01 Mounting aid
	Quick clamp and adjustment systemfa

	OMH-SLCT-06 Mounting aid
	Swivel Bracketfa

	OMH-LGS-01 Mounting aid
	Attachment aid for light grid series LGS/LGMfa

	OMH-SLCT-03 Mounting aid
	Mounting bracket including adjustmentfa

	OMH-SLCT-04 Mounting aid
	Mounting bracket including adjustment (with loose bearing)fa

	OMH-SLCT-05 Mounting aid
	Mounting bracket including adjustmentfa

	AA SLCT-01 Alignment aid
	Profile alignment aid; simplified alignment of the SLCS and SLCT safety light curtainsfa

	V1-G-BK2M-PUR-U Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

	V1-G-BK15M-PUR-U Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

	V19-G-BK10M-PUR-IEC Female connector
	Female cordset, M12, 8-pin, PUR-cablefa

	V19-G-BK2M-PUR-IEC Female connector
	Female cordset, M12, 8-pin, PUR-cablefa

	V19-G-BK5M-PUR-IEC Female connector
	Female cordset, M12, 8-pin, PUR-cablefa

	V19-G-BK2M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight A-coded 8-pin to M12 plug straight A-coded 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

	PACTware 4.1 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa

	V1-G-BK0,6M-PUR-U-V1-G-LGS25T Connection cable
	Cordset, LGS25 light grids to ICE modules/WIS 2, M12 to M12, PUR cable, 4-pinfa

	ICE1-8IOL-G30L-V1D IO-Link master
	Ethernet IO-Link module with 8 inputs/outputsfa

	ICE1-8IOL-G60L-V1D IO-Link master
	Ethernet IO-Link module with 8 inputs/outputsfa

	ICE2-8IOL-K45P-RJ45 IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa

	ICE2-8IOL-K45S-RJ45 IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa

	ICE3-8IOL-K45P-RJ45 IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa

	ICE3-8IOL-K45S-RJ45 IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa

	IO-Link-Master02-USB IO-Link master
	IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa

Uwagi ogólne dotyczące informacji o produktach firmy Pepperl+Fuchs

Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
phone +48 22 256 9770

Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.