Elevator light grid AL2109-P-1820/25/49/76a/143
- Low-profile, high resolution light grid for monitoring locking edges on elevators and accesses
- In accord with EN81-20 and EN81-70
- Dense monitoring field with up to 135 beams ensures that small objects are detected
- Object detection up to distance of zero
- Automatic beam crossing
- Test input
- Insensitive to reflection and ambient light
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne AL2109-P-1820/25/49/76a/143
| Opis produktu |
|---|
| High-resolution light grid for detecting people and objects, set comprising emitter and receiver, field height: 1800 mm, light/dark on, 1 NPN output and 1 PNP output, M8 plug |
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 3500 mm | |
| Threshold detection range | 3500 mm | |
| Light source | IRED | |
| Light type | modulated infrared light , 950 nm | |
| Field height | 1800 mm | |
| Beam crossover | automatic, 3x/5x/7x (depending on distance between transmitter/receiver) | |
| Beam spacing | 90 mm | |
| Number of beams | 61 ... 135 (dynamic) | |
| Opening angle | Emitter: < 20 ° , Receiver: < 6 ° | |
| Ambient light limit | > 100000 Lux | |
| Accessories provided | 2 connecting cable , length 5 m (15 ft) | |
| Functional safety related parameters | ||
| MTTFd | 180 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red (in receiver): Illuminates after connecting operating power, goes out when an object is detected | |
| Electrical specifications | ||
| Operating voltage | 11 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | < 180 mA | |
| Input | ||
| Test input | Test: Operating voltage , Operating mode 0 V | |
| Output | ||
| Switching type | light-on | |
| Signal output | 1 PNP and 1 NPN, short-circuit protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | 100 mA | |
| Switching frequency | < 3 Hz | |
| Response time | < 100 ms | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 12015:2014 EN 12016:2013 | |
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2 Edition 3.1:2012-09 | |
| Standards | EN 81-70:2003-05 EN 81-70/A1:2004-12 EN 81-20:2014; Section 5.3.6.2.2.1 Taking into account object detection in accordance with the datasheet specification for the monitoring field. | |
| Approvals and certificates | ||
| UL approval | E310569 , cULus Listed , class 2 power supply , max. ambient temperature 60 °C | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 65 °C (-4 ... 149 °F) | |
| Mechanical specifications | ||
| Profile width | 9 mm | |
| Degree of protection | IP54 | |
| Connection | M8 x 1 connector, 4-pin | |
| Material | ||
| Housing | Aluminum | |
| Optical face | plastic | |
| Mass | 2000 g (device) | |
| Dimensions | ||
| Width | 9 mm | |
| Depth | 34 mm | |
| Length | 2000 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270910 |
| ECLASS 12.0 | 27270910 |
| ECLASS 11.0 | 27270910 |
| ECLASS 10.0.1 | 27270910 |
| ECLASS 9.0 | 27270910 |
| ECLASS 8.0 | 27270910 |
| ECLASS 5.1 | 27270910 |
| ETIM 9.0 | EC002549 |
| ETIM 8.0 | EC002549 |
| ETIM 7.0 | EC002549 |
| ETIM 6.0 | EC002549 |
| ETIM 5.0 | EC002549 |
| UNSPSC 12.1 | 39121528 |
Details: AL2109-P-1820/25/49/76a/143
Function
The AL2109 elevator light grid is used to protect elevator doors or for passenger monitoring and access control. Its special features include its dynamic beam crossover with up to 135 active sensors, object detection down to nearly zero millimeters and an ambient light limit greater than 100,000 Lux. The evaluation electronics and the power supply are completely integrated into the emitter and receiver element, so that no external equipment is necessary for operation. The system offers flexible mounting options and meets the newest standards in accordance with EN 81-20 and EN 81-70.
Informative Literature: AL2109-P-1820/25/49/76a/143
| Literature | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Brochure - Automation Light Grids: LGS and LGM Series | ENG | 1965 KB |
Product Documentation: AL2109-P-1820/25/49/76a/143
| Brief Instructions | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 504 KB |
Design / Simulation: AL2109-P-1820/25/49/76a/143
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 52 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: AL2109-P-1820/25/49/76a/143
| Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| Canada, USA General Purpose | UL-US-2133488-0 / UL-CA-2133488-0 | ALL | 545 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-1903C | ALL | 226 KB | |
Produkty powiązane: AL2109-P-1820/25/49/76a/143
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.