Atendimento ao Cliente da Divisão de Sensores Industriais
Rede de Atendimento - Divisão de Proteção Contra Explosão
Type Z & Ex pzc purge and pressurization system 7500-MTD-PMRW-01
- Must be used in conjunction with an EPV-7500-* vent
- Panel mount, rectangular panel
- Universal power: AC or DC
- Touch screen display with LEDs for easy visual indication
- Easy setup with pre-set purge programs for your application
- Automatic pressure compensation with digital manifold
- Rugged, corrosion-resistant housing
- Global third-party approvals for Class I, II, Div. 2 and Zone 2/22
- Manual valve, no electrical power requirement
- Purge and pressurization valving in one device
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do 7500-MTD-PMRW-01
| Descrição do Produto |
|---|
| Type Z & Ex pzc purge and pressurization system, panel mount, rectangular panel |
| General specifications | ||
|---|---|---|
| Equipment architecture | max. enclosure size 12.7 m3 (450 ft3) For complete technical data, see the 7500 Control Unit and 7500-MAN-MV-01 datasheets |
|
| Operating mode | fully automatic (FA) | |
| Series | 7500 | |
| System | Type Z Purge ; Ex pzc Purge | |
| Hazardous environment | gas or dust | |
| Supply | ||
| Rated voltage | 20 ... 30 V DC at 0.1 A 90 ... 250 V AC , 50 ... 60 Hz at 0.04 A without solenoid valve Supply voltage can be line-to-line or line-to-neutral, single phase OVC II |
|
| Power consumption | max. 2.7 W / 7.3 VA without valve | |
| Electrical specifications | ||
| Connection | screw terminals -- see manual for specifications on wire size and torque values | |
| Output | ||
| Output I | ||
| Connection | K1, terminals, 1 x NO | |
| Output type | enclosure power contacts | |
| Contact loading | 5 A at 250 V AC , 5 A at 30 V DC, relays must be externally fused inrush current: 50 A | |
| Output II | ||
| Connection | K2, terminals, 1 x NO | |
| Output type | alarm and control contacts | |
| Contact loading | 5 A at 250 V AC , 5 A at 30 V DC, relays must be externally fused inrush current: 50 A | |
| Output III | ||
| Connection | SV1, terminals, L1 powered contact | |
| Output type | solenoid manifold, contact | |
| Contact loading | 0.5 A at 250 V AC , 0.5 A | |
| Indicators/settings | ||
| LED indication | K1: Green - Contact K1 is energized (enclosure contacts) K2: Amber - Contact K2 is energized (alarm/control contacts) P/SV: Blue - Safe pressure P1 (minimum enclosure pressure) P/SV: Amber - Solenoid manifold is energized (purging/pressure compensation) |
|
| Pneumatic parameters | ||
| Protective gas supply | compressed air or inert gas, 40 µm filter, free from oil | |
| Pressure requirement | supply pressure: 1.4 ... 8.2 bar (20 ... 120 psig) | |
| Safe pressure | P1 for gas: 0.12 inch w.c. (0.30 mbar) P1 for dust: 0.52 inch w.c. (1.29 mbar) P2: 0.8 inch w.c. (1.99 mbar) P3: 2.5 inch w.c. (6.22 mbar) P4: 4.5 inch w.c. (11.2 mbar) pressure sensing: ± 0.125 in wc (0.31 mbar) |
|
| Enclosure pressure | 0 ... 12.9 mbar (0 ... 5 in wc) | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| Conformity | ||
| Electromagnetic compatibility | EN 61326-3-2:2008, EN 61000-6-2:2005 | |
| Emitted interference | FCC CFR 47, part 15, subpart B: 2017 , ICES-003, Issue 6:2016, Class A ITE | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 50 °C (-40 ... 122 °F) at T6 -40 ... 65 °C (-40 ... 149 °F) at T5 -40 ... 70 °C (-40 ... 158 °F) at T4 |
|
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Relative humidity | 5 ... 90 %, non-condensing | |
| Altitude | max. 2000 m | |
| Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes | |
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Connection type | electrical: 2 x 1/2 inch NPTF (open from factory) 1 x M12 opening (plugged from factory) pneumatic: high-pressure port - 1/8 in NPTF, low-pressure port - 1/8 in NPTF |
|
| Degree of protection | Mounting to enclosure Type 4X / IP66 | |
| Material | Lens: Makrolon® GP-V polycarbonate Screws: AISI 316 (1.4401), 304, or 18-8 stainless steel Housing: A380, A356, or 6061-T6 aluminum Mounting gasket: Bisco® HT-800 medium cellular silicone Mounting tabs: SAE 304 stainless steel M12 plug: 6061-T6 aluminum |
|
| Mass | 2.5 kg (5 lb 10 oz) | |
| Data for application in connection with hazardous areas | ||
| Certificate | ||
| Marking |  II 3 G Ex ec mc nC [pzc Gc] IIC T6...T4 Gc II 3 D Ex mc tc [pzc Dc] IIIC T60 °C ... T80 °C Dc |
|
| Directive conformity | ||
| Directive 2014/34/EU | IEC/EN 60079-0 , IEC/EN 60079-2 , IEC/EN 60079-7 , IEC/EN 60079-15 , IEC/EN 60079-18 , IEC/EN 60079-31 Supplements: EN 61010-1:2010 |
|
| International approvals | ||
| UL approval | ||
| cULus | Class I, Division 2, Groups A, B, C, D T6 ... T4 Class II, Division 2, Groups F, G T6 ... T4 |
|
| IECEx approval | Ex ec mc nC [pzc Gc] IIC T6...T4 Gc Ex mc tc [pzc Dc] IIIC T60 °C ... T80 °C Dc |
|
| General information | ||
| Supplementary information | Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180508 |
| ECLASS 12.0 | 27180508 |
| ECLASS 11.0 | 27180508 |
| ECLASS 10.0.1 | 27180508 |
| ECLASS 9.0 | 27180508 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121301 |
Details: 7500-MTD-PMRW-01
Informative Literature: 7500-MTD-PMRW-01
| Literature | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|
| Product Information - Pepperl+Fuchs Bebco EPS® 7500 Series Type Z/Ex pzc Purge and Pressurization System | ENG | 682 KB |
Product Documentation: 7500-MTD-PMRW-01
| Safety and Security Documentation | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|
| Manual de instruções | POR | 163 KB | |
| Manuals | |||
| Manual | ENG | 5689 KB | |
Design / Simulation: 7500-MTD-PMRW-01
| CAD | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|
| CAD 2-D / CAD 2-D | ALL | ZIP | 963 KB |
| CAD 3-D / CAD 3-D | ALL | STP | 11349 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: 7500-MTD-PMRW-01
| Certificates | Número do Certificado | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|---|
| Brasil TUV Rheinland Brazil | TÜV 22.1423X | ALL | 1303 KB | |
| IECEx Certificate of Conformity | IECEx UL 18.0022X | ALL | LINK | --- |
| Korea KOSHA | 18-AV4BO-0462X | ALL | 504 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0C4C | ALL | 171 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F8 | ALL | 167 KB | |
Produtos Relacionados: 7500-MTD-PMRW-01
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Conheça a maneira mais inteligente de garantir a proteção em locais classificados e configure seu sistema individual de purga e pressurização!
Este sistema de purga e pressurização eleva o nível de proteção em áreas classificadas. Projetado para locais Classe I ou II/Div. 2 e Zona 2/22, e fornece recursos únicos em um invólucro extremamente compacto…
Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
+55 11 4007 1448
© 2024 Todos os Direitos Reservados.
A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.