USi-safety evaluation unit USI-F262-2E5-V19-S2D3
- Categorie 3 PL d (EN ISO 13849) for each ultrasonic transducer without redundancy
- Multiple device installation possible, no mutual interference (no cross-talk)
- Safety outputs OSSD
- Adjustable sound cone
- Temperature compensation
- Parameterization, commissioning and reporting via USi-safety parameterization software
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Výňatek z katalogového listu: Technická data USI-F262-2E5-V19-S2D3
| Popis produktu |
|---|
| Evaluation unit exclusively for the ultrasonic sensor system USi-safety |
| General specifications | ||
|---|---|---|
| Type | USi-safety evaluation unit | |
| Sensing range | 1 ... 250 cm typ. 200 cm |
|
| Adjustment range | 1 ... 250 cm | |
| Dead band | 1 cm | |
| Object size | typ. ∅ 1 cm | |
| Transducer frequency | typ. 103 kHz | |
| Resolution | 1 cm | |
| Target velocity | axial (max.): typ. 2 m/s (up to 2.5 m/s) | |
| Repeat accuracy | ± 0 cm | |
| Hysteresis | typ. 0 cm (0 up to SP1/10) | |
| Temperature influence | automatic or manual temperature compensation available , without temperature compensation: 0.17 %/K |
|
| Functional safety related parameters | ||
| Performance level (PL) | PL d | |
| Category | Cat. 3 | |
| Reaction time | typ. 100 ms ( 99 ... 660 ms ) | |
| Recovery time | typ. 990 ms ( 330 ... 3300 ms ) | |
| MTTFd | 316 a | |
| Diagnostic Coverage (DC) | 87 % | |
| Electrical specifications | ||
| Fusing | 2 A , slow | |
| Operating voltage | 21 ... 28 V DC typ. 24 V DC |
|
| No-load supply current | ≤ 150 mA | |
| Power consumption | max. 3.6 W | |
| Interface | ||
| Interface type | USB 2.0 | |
| Inputs | ||
| Input type | 2 inputs for ultrasonic transducers 1 input for temperature sensor |
|
| Output 1 | ||
| Output type | safety output OSSD Normally closed, Power FET PNP OSSD 1.1 and OSSD 1.2 |
|
| Switching voltage | max. UB | |
| Switching current | 150 mA per output | |
| Output 2 | ||
| Output type | safety output OSSD Normally closed, Power FET PNP OSSD 2.1 and OSSD 2.2 |
|
| Switching current | 150 mA per output | |
| Output 3 | ||
| Output type | Normally open/normally closed switchable, Power FET PNP signal output OUT1 |
|
| Switching voltage | max. UB | |
| Switching current | 150 mA | |
| Output 4 | ||
| Output type | Normally open/normally closed switchable, Power FET PNP signal output OUT2 |
|
| Switching voltage | max. UB | |
| Switching current | 150 mA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | IEC 60947-5-2 IEC 60204-1 EN ISO 13849 IEC 61326-3-1:2007 IEC/CISPR 11 group 1, class A |
|
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 50 °C (-22 ... 122 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug | |
| Degree of protection | IP65 | |
| Connection | for power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m for temperature sensor: socket M8, 6-pin for ultrasonic transducer: for each socket M8, 3-pin for parameterization: socket Mini USB |
|
| Material | ||
| Housing | diecast aluminum | |
| Mass | 450 g | |
| Dimensions | ||
| Height | 41 mm | |
| Width | 91 mm | |
| Length | 125 mm | |
| Factory settings | ||
| Default setting | See the original instructions | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: USI-F262-2E5-V19-S2D3
Informative Literature: USI-F262-2E5-V19-S2D3
| Literature | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safety | ENG | 1781 KB | |
| Application Report - Driverless and Safe Through the Logistics Center | ENG | 327 KB | |
| Application Report - Reliable Lateral Protection for Autonomous Transport of Large Tanks | ENG | 304 KB | |
| Application Report - Ultrasonic Sensors for Automated Guided Transport Systems Keep Personnel Safe | ENG | 375 KB |
Product Documentation: USI-F262-2E5-V19-S2D3
| Safety and Security Documentation | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Návod k poużití | CZE | 151 KB | |
| Original instructions USi-safety | ENG | 4972 KB |
Design / Simulation: USI-F262-2E5-V19-S2D3
| CAD | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| 3-D model with sound geometry (at factory defaul settings and room temperature) / 3-D-Modell mit Schallgeometrie (bei Werkseinstellung und Raumtemperatur) | ALL | STP | 2211 KB |
| CAD 3-D / CAD 3-D | ALL | STP | 123 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: USI-F262-2E5-V19-S2D3
| Certificates | Číslo certifikátu | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|---|
| Worldwide SIBE Functional Safety Certificate | No. 1492 | ALL | 2163 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5003 | ALL | 45 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6535 | ALL | 64 KB | |
Software: USI-F262-2E5-V19-S2D3
| Software Tools | Informace o uvolnění | Typ souboru | Velikost souboru |
|---|---|---|---|
| Parameterization software for USi-safety / Parametriersoftware für USi-safety | 2023-01 | ZIP | 8643 KB |
Související produkty: USI-F262-2E5-V19-S2D3
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
Systém ultrazvukových senzorů USi-safety posouvá bezpečnostní aplikace na novou úroveň – ať již se jedná o aplikace v náročných, prašných prostředích nebo ve venkovních prostorách.
Společnost Pepperl+Fuchs vám nabízí různé dokumenty ke stažení, které obsahují poznatky o ultrazvukových senzorech.
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
© 2024 Všechna práva vyhrazena
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.