Ultrasonic sensor UC2000-30GM-E7R2-V15

Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
2 programmable switch outputs
Hysteresis mode selectable
Window mode selectable
Synchronization options
Adjustable acoustic power and sensitivity
Temperature compensation

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Související produkty
Zeptejte se odborníků

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:

Výňatek z katalogového listu: Technická data UC2000-30GM-E7R2-V15

Popis produktu
Single head system

General specifications
Sensing range		80 ... 2000 mm
Adjustment range		120 ... 2000 mm
Dead band		0 ... 80 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 180 kHz
Response delay		65 ms minimum 195 ms factory setting
Indicators/operating means
LED green		solid: Power-on flashing: Standby mode or program function object detected
LED yellow 1		solid: switching state switch output 1 flashing: program function
LED yellow 2		solid: switching state switch output 2 flashing: program function
LED red		solid: temperature/program plug not connected flashing: fault or program function object not detected
Temperature/teach-in connector		Temperature compensation , Switch points programming , output function setting
Electrical specifications
Operating voltage		10 ... 30 V DC , ripple 10 %_SS
No-load supply current		≤ 50 mA
Interface
Interface type		RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
Input/Output
Synchronization		bi-directional 0 level -U_B...+1 V 1 level: +4 V...+U_B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency
	Common mode operation	max. 30 Hz
	Multiplex operation	≤ 30 Hz / n , n = number of sensors , n ≤ 5
Output
Output type		2 switch outputs NPN, NO/NC, programmable
Rated operating current		200 mA , short-circuit/overload protected
Voltage drop		≤ 2.5 V
Repeat accuracy		≤ 0.1 % of full-scale value
Switching frequency		≤ 2.5 Hz
Range hysteresis		1 % of the adjusted operating range (default settings), programmable
Temperature influence		≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation)
Compliance with standards and directives
Standard conformity
	Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 5-pin
Degree of protection		IP65
Material
	Housing	stainless steel (1.4305 / AISI 303) PBT plastic parts
	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass		140 g
Dimensions
	Length	94 mm
	Diameter	30 mm
Factory settings
Output 1		Switching point: 200 mm output function: Switch point operation mode output behavior: NO contact
Output 2		Switching point: 2000 mm output function: Switch point operation mode output behavior: NO contact

Classifications

System	Classcode
ECLASS 13.0	27272803
ECLASS 12.0	27272803
ECLASS 11.0	27272803
ECLASS 10.0.1	27272803
ECLASS 9.0	27272803
ECLASS 8.0	27272803
ECLASS 5.1	27272803
ETIM 9.0	EC001849
ETIM 8.0	EC001849
ETIM 7.0	EC001849
ETIM 6.0	EC001849
ETIM 5.0	EC001849
UNSPSC 12.1	41111960

Details: UC2000-30GM-E7R2-V15

Informative Literature: UC2000-30GM-E7R2-V15

Literature	Jazyk	Typ souboru	Velikost souboru
Application Report - Rugged Collision Protection for Cleaning Robots	ENG	PDF	313 KB

Product Documentation: UC2000-30GM-E7R2-V15

Brief Instructions	Jazyk	Typ souboru	Velikost souboru
Instruction leaflet / Beipackzettel	ALL	PDF	836 KB
Safety and Security Documentation
Návod k poużití	CZE	PDF	147 KB
Manuals
Manual ULTRA2001	ENG	PDF	1494 KB

Design / Simulation: UC2000-30GM-E7R2-V15

CAD	Jazyk	Typ souboru	Velikost souboru
CAD 3-D / CAD 3-D	ALL	STP	43 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	68 KB

Approvals: UC2000-30GM-E7R2-V15

Certificates	Číslo certifikátu	Jazyk	Typ souboru	Velikost souboru
Canada USA UL Ordinary Location	UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3	ALL	PDF	1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2366C	ALL	PDF	48 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5442	ALL	PDF	41 KB

Související produkty: UC2000-30GM-E7R2-V15

Accessories

	BF 30 Mounting flange
	Mounting flange, 30 mmfa

	BF 5-30 Mounting flange
	Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa

	V15-G-2M-PVC Female cordset
	Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa

	V15-W-2M-PUR Female cordset
	Female cordset single-ended M12 angled A-coded, 5-pin, PUR cable greyfa

	BF 30-F Mounting flange
	Plastic mounting adapter, 30 mmfa

	ULTRA3000 Service program
	Software for ultrasonic sensors, comfort linefa

	UVW90-M30 Ultrasonic -deflector
	Ultrasonic -deflector, Universal mounting possibilities, 90° sound deflection for difficult installation circumstances, Focussing effectfa

	UVW90-K30 Ultrasonic -deflector
	Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa

	M30K-VE Mounting aid
	Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa

	UC-30GM-R2 Interface cable
	fa

Všeobecné poznámky týkající se produktů společnosti Pepperl+Fuchs

Spolehlivé zabezpečení v souladu s kategorií 3 PL d

Systém ultrazvukových senzorů USi-safety posouvá bezpečnostní aplikace na novou úroveň – ať již se jedná o aplikace v náročných, prašných prostředích nebo ve venkovních prostorách.

Soubory k bezplatnému stažení: Průvodci technologiemi ultrazvukových senzorů

Společnost Pepperl+Fuchs vám nabízí různé dokumenty ke stažení, které obsahují poznatky o ultrazvukových senzorech.

Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
phone +420 225 989 180

Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.