WIS module primary NDP-KE2-8E2
- 8 channels
- 9 outputs
- LEDs for display of the output states and communication
- Deactivation option
- Housing with removable terminals
- DIN rail mounting
- For connection of 1 transmitter head
- Can only be used in conjunction with NDP5-30GM series WIS transmitter
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Výňatek z katalogového listu: Technická data NDP-KE2-8E2
| Popis produktu |
|---|
| Inductive transmitter system |
| Nominal ratings | ||
|---|---|---|
| Operating voltage | 24 V DC ± 10 % | |
| Number of signal channels | 8 | |
| Signal transfer direction | from secondary side to primary side | |
| Reverse polarity protection | reverse polarity protected | |
| Current consumption | max. 1000 mA | |
| Functional safety related parameters | ||
| MTTFd | 245 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Switching state | 8 x LED, yellow | |
| Transfer indicator | LED, green | |
| Input | ||
| Number | 1 | |
| Input type | Activation input signal level: ≥ 15 V = active, ≤ 3 V inactive |
|
| Input current | ≤ 1 mA | |
| Internal resistor | ≥ 15 kΩ | |
| Output | ||
| Output type | 1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched high) , overload and short-circuit resistant | |
| Voltage drop | ≤ 2.5 V | |
| Load current | max. 50 mA | |
| Response time | ≤ 200 ms ( static operation , the transmission heads stand opposite to each other ) | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 89/336/EEC | EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Material | ||
| Housing | PA 66-FR | |
| Installation | DIN rail mounting | |
| Mass | 106 g | |
| General information | ||
| Note | Maximum cable length between WIS module and WIS transmitter must not exceed 5 m. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274090 |
| ECLASS 12.0 | 27274090 |
| ECLASS 11.0 | 27270190 |
| ECLASS 10.0.1 | 27270190 |
| ECLASS 9.0 | 27270190 |
| ECLASS 8.0 | 27270190 |
| ECLASS 5.1 | 27270190 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NDP-KE2-8E2
Informative Literature: NDP-KE2-8E2
| Literature | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Application Report - Non-Contact, Wear-Free Signal and Power Transmission | ENG | 314 KB |
Product Documentation: NDP-KE2-8E2
| Brief Instructions | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 254 KB |
Design / Simulation: NDP-KE2-8E2
| CAD | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 4237 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Související produkty: NDP-KE2-8E2
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.