Servisní linka pro průmyslové snímače
Zeptejte se odborníků
Servisní linka ochrany před výbuchem
Zeptejte se odborníků
Průmyslové senzory

RFID evaluation unit IC-KP2-2HB6-V15B

IC-KP2-2HB6-V15B
  • LED status indicator of bus communication and read/write heads
  • Max. 2 read/write heads can be connected
  • Alternatively 1 read/write head and 1 trigger sensor can be connected

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:


Výňatek z katalogového listu: Technická data   IC-KP2-2HB6-V15B

Popis produktu
IDENTControl Compact RFID evaluation unit with interface for PROFIBUS DP
General specifications
Number of read/write headsmax. 2
alternatively 1 read/write head and 1 trigger sensor
UL File NumberE87056
Indicators/operating means
LED BUSgreen: Slave is at state "Data Exchange"
red: Bus error
LED DiagNo function
LEDs 1, 2Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
LEDs CH1, CH2green: read head detected
red: Configuration error
LED PWR/ERRgreen: power on
red: Hardware fault
Rotary switchAddress setting 00 ... 7E, FF (hexadecimal)
BUS Address (high nibble): 0 ... 7, F
BUS Address (low nibble): 0 ... F
Electrical specifications
Rated operating voltage20 ... 30 V DC , PELV
Ripple≤ 10 % at 30 V DC
Current consumption≤ 4 A incl. read/write heads
Power consumption2 W Without read/write heads
Galvanic isolationbasic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
Interface 1
Interface typePROFIBUS
Physical RS-485
ProtocolPROFIBUS DP acc. to EN 50170
Transfer rate9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s
3; 6; 12 Mbit/s self-synchronizing
Interface 2
Interface typeDiagnostic Interface
Physical RS 232
ProtocolASCII
Transfer rate38.4 kBit/s
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2
EN 61000-6-4
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Standard conformity
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Climatic conditionsair humidity max. 96 %
Salt spray resistant to EN 60068-2-52
Shock and impact resistanceOscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
Mechanical specifications
Degree of protectionIP67
ConnectionRead/write heads: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective earth: M4 earthing screw
Diagnostic RS 232: M12 connector
PROFIBUS: M12 connector, B-coded
Material
Housingpowder coated aluminum
Installationscrew fixing
Massapprox. 300 g
Dimensions
Height42 mm
Width62 mm
Length137 mm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IC-KP2-2HB6-V15B

Informative Literature: IC-KP2-2HB6-V15B

Výběr jazyka:
LiteratureJazykTyp souboruVelikost souboru
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB
Application Report - Safe Assignment of Workpiece and ToolENGPDF204 KB

Product Documentation: IC-KP2-2HB6-V15B

Výběr jazyka:
Brief InstructionsJazykTyp souboruVelikost souboru
Brief Instructions - IC-KP2-*ENGPDF2285 KB
Commissioning IC-KP2-2HB6 with Profinet at S7 PLCENGPDF230 KB
Manuals
Manual IC-KP2-2HB6-V15BENGPDF1514 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB

Design / Simulation: IC-KP2-2HB6-V15B

Výběr jazyka:
CADJazykTyp souboruVelikost souboru
CAD 3-D / CAD 3-DALLSTP1666 KB
CAD Portal / CAD PortalALLLINK---

Approvals: IC-KP2-2HB6-V15B

Výběr jazyka:
CertificatesČíslo certifikátuJazykTyp souboruVelikost souboru
Canada, USA ULCoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0ALLPDF561 KB
Korea Radio ApprovalMSIP-REI-PF1-ICKP22HB6V15BALLPDF365 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0687EALLPDF111 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6844ALLPDF108 KB

Software: IC-KP2-2HB6-V15B

Výběr jazyka:
Device Description Files/DriversInformace o uvolněníTyp souboruVelikost souboru
GSD file IC-KP2-xHB6-... / GSD-Datei IC-KP2-xHB6-...06/2009ZIP6 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC21 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC21 DatenträgersV2.0ZIP2215 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC22 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC22 DatenträgersV2.0ZIP2216 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC24 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC24 DatenträgersV2.0ZIP2220 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC33 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC33 DatenträgersV2.0ZIP2209 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC35 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC35 DatenträgersV2.0ZIP2214 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for reading and writing of the IQC37 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum Lesen und Schreiben des IQC37 DatenträgersV2.0ZIP2219 KB
Function block TIA Portal (S7-1200/1500) for the evaluation units IDENTControl IC-KP2-2HB (Profinet + Profibus) when using IPH-...-V1, IQH1-...-V1 or IUH-...-V1 RFID heads with single-frame protocol. / Funktionsbaustein TIA Portal (S7-1200/1500) für die Auswerteeinheiten IDENTControl IC-KP2-2HB (Profinet + Profibus) bei der Verwendung von IPH-...-V1, IQH1-...-V1 oder IUH-...-V1 RFID-Köpfen mit Single-Frame Protokoll.V3.0ZIP21921 KB
Function block TIA Portal (S7-1200/1500) for the evaluation units IDENTControl IC-KP2-2HB (Profinet + Profibus) when using IQH3-...-V1 RFID heads with single-frame protocol / Funktionsbaustein TIA Portal (S7-1200/1500) für die Auswerteeinheiten IDENTControl IC-KP2-2HB (Profinet + Profibus) bei der Verwendung von IQH3-...-V1 RFID-Köpfen mit Single-Frame ProtokollV1.0ZIP10743 KB
Function block TIA Portal (S7-1200/1500) for the evaluation units IDENTControl IC-KP2-2HB (Profinet + Profibus) when using IUH-F190-V1-FR and IUH-F192-V1-FR RFID heads with multi-frame protocol. / Funktionsbaustein TIA Portal (S7-1200/1500) für die Auswerteeinheiten IDENTControl IC-KP2-2HB (Profinet + Profibus) bei der Verwendung von IUH-F190-V1-FR und IUH-F192-V1-FR RFID-Köpfen mit Multi-Frame Protokoll.V3.0ZIP17614 KB
Function block TIA Portal (S7-300/400) for the evaluation units IDENTControl IC-KP2-2HB (Profinet + Profibus) when using IPH-...-V1, IQH1-...-V1 or IUH-...-V1 RFID heads with single-frame protocol / Funktionsbaustein TIA Portal (S7-300/400) für die Auswerteeinheiten IDENTControl IC-KP2-2HB (Profinet + Profibus) bei der Verwendung von IPH-...-V1, IQH1-...-V1 oder IUH-...-V1 RFID-Köpfen mit Single-Frame ProtokollV4.0ZIP9891 KB
SIMATIC S7 sample project file for PROFIBUS with IC-KP2-2HB6 / SIMATIC S7 Beispielprojekt für die PROFIBUS-Anbindung mit IC-KP2-2HB612/2009ZIP447 KB
Step 7 function block S7-300/400 for IC-KP2-2HB17 (Profinet) and IC-KP2-2HB6 (Profibus) MultiFrame protocol UHF-System / Step 7 Funktionsbaustein S7-300/400 für IC-KP2-2HB17 (Profinet) und IC-KP2-2HB6 (Profibus) MultiFrame Protokoll UHF-SystemV3.3ZIP8387 KB

Související produkty: IC-KP2-2HB6-V15B

Accessory of

HF RFID read/write device, ISO 15693, for IDENTControlfa

HF RFID read/write device, ISO 15693, for IDENTControlfa

HF RFID read/write device, ISO 15693, for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

UHF RFID read/write device for IDENTControl, Europefa
UHF read/write head for hazardous areas, for IDENTControl, Canada, USA, and Mexicofa
HF RFID read/write device, ISO 15693, for IDENTControlfa
HF RFID read/write device, ISO 15693, for IDENTControlfa
HF RFID read/write device, ISO 15693, for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControlfa
HF RFID read/write device for hazardous areas, ISO 15693, for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControl, for hazardous areasfa
HF RFID read/write device for hazardous areas, ISO 15693, for IDENTControlfa
UHF RFID read/write device for IDENTControl, Europe, hazardous areasfa
UHF RFID read/write device for IDENTControl, Indiafa
UHF RFID read/write device for IDENTControl, Singaporefa
UHF RFID read/write device for IDENTControl, Moroccofa
UHF RFID read/write device for IDENTControl, USA, Canada and Argentinafa
UHF RFID read/write device for IDENTControl, Chinafa
UHF RFID read/write device for IDENTControl, Brazilfa
UHF RFID read/write device for IDENTControl, Japanfa
UHF RFID read/write device for IDENTControl, Australiafa
UHF RFID read/write device for IDENTControl, Thailand and Hong Kongfa
UHF RFID read/write device for IDENTControl, Malaysiafa
UHF RFID read/write device for IDENTControl, Singaporefa
UHF RFID read/write device for IDENTControl, Indonesiafa
UHF RFID read/write device for IDENTControl, Europe, Middle East and Africfa
UHF RFID read/write device for IDENTControlfa
UHF RFID read/write device for IDENTControl, USA, Canada and Argentinafa
LF read/write head, for IDENTControl, for hazardous areasfa
HF read/write head, ISO 15693, for IDENTControl, hazardous areasfa
HF RFID read/write device, ISO 15693, for IDENTControlfa
Accessories

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable grey, shieldedfa

Y connection cable for PROFIBUSfa

Terminal cable for PROFIBUS with terminal resistorfa
PROFIBUS bus cable M12 socket straight to M12 plug straight B-coded, 5-pin, PUR cable 2-core violet, shieldedfa
PROFIBUS bus cable M12 socket straight to M12 plug straight B-coded, 5-pin, PUR cable 2-core violet, shieldedfa
Mounting aid for DIN railfa
Adapter cable M12 plug straight A-coded 4-pin to Sub-D-plug straight 9-pin, PUR cable grey, shieldedfa
Adapter cable M12 plug straight A-coded 4-pin to Sub-D-socket straight 9-pin, PUR cable grey, shieldedfa
Všeobecné poznámky týkající se produktů společnosti Pepperl+Fuchs
Navštivte RFID Hub

Navštivte náš „RFID Hub“ – speciální web se znalostní databází pro RFID. Získejte odpovědi na často kladené dotazy a informace o typických aplikacích RFID…

Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
phone +420 225 989 180

© 2024 Všechna práva vyhrazena

Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.