Protection Module for Surge Protection Barrier M-LB-1.275.M

Protection module for 1 supply line
Type 2 acc. to EN 61643-11
Exchange device for surge protection barrier M-LB-*.275*.D
Easy replacement of protection modules wihtout tools
High discharge capacity
Module can be exchanged under voltage (hot swap)

Technical Data
Approvals
Související produkty
Zeptejte se odborníků

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:

Výňatek z katalogového listu: Technická data M-LB-1.275.M

General specifications
Device type		type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1
Number of protected supply lines		1
Electrical specifications
Maximum continuous operating voltage		275 V AC
Nominal discharge current (8/20 µs)		20 kA
Max. surge current (8/20 µs)		40 kA
Indicators/settings
Display elements		status display operating state (green) fault indication (red)
Directive conformity
Low voltage
	Directive 2014/35/EU	EN 61643-11:2012
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2
Vibration resistance		EN 60068-2
Ambient conditions
Ambient temperature		-40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Degree of protection		IP20
Material
	Housing	thermoplastic, color grey , UL 94 V-0
Mass		approx. 50 g
Dimensions		18 x 45 x 50 mm (0.7 x 1.8 x 2 inch) (W x H x D) , 1 TE acc. to DIN 43880
	Height	45 mm
	Width	18 mm
	Depth	50 mm
Mounting		in the surge protection barrier M-LB-.**.
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27171202
ECLASS 12.0	27171202
ECLASS 11.0	27130805
ECLASS 10.0.1	27130805
ECLASS 9.0	27130805
ECLASS 8.0	27130805
ECLASS 5.1	27130801
ETIM 9.0	EC000941
ETIM 8.0	EC000941
ETIM 7.0	EC000941
ETIM 6.0	EC000941
ETIM 5.0	EC000941
UNSPSC 12.1	39121610

Details: M-LB-1.275.M

Approvals: M-LB-1.275.M

Certificates	Číslo certifikátu	Jazyk	Typ souboru	Velikost souboru
USA UL Surge Protective Device UL	E346845 UL (VZCA2)	ALL	PDF	235 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0925A	ALL	PDF	67 KB

Související produkty: M-LB-1.275.M

Accessory of

	M-LB-2.275TT.D Surge Protection Barrier
	Surge protection for 2 supply lines, Type 2 acc. to EN 61643-11, For TT and TN systems (230 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 2pa

	M-LB-4.275TNS.D Surge Protection Barrier
	Surge protection for 4 supply lines, Type 2 acc. to EN 61643-11, For TN-S systems (230 V AC/400 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 4pa

	M-LB-4.275TT.D Surge Protection Barrier
	Surge protection for 4 supply lines, Type 2 acc. to EN 61643-11, For TT and TN-S systems (230 V AC/400 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 4pa

	M-LB-3.275TNC.D Surge Protection Barrier
	Surge protection for 3 supply lines, Type 2 acc. to EN 61643-11, For TN-C systems (230 V AC/400 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 3pa

	M-LB-1.275.D Surge Protection Barrier
	Surge protection for 1 supply line, Type 2 acc. to EN 61643-11, For 230 V, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 1pa

	M-LB-2.275TN.D Surge Protection Barrier
	Surge protection for 2 supply lines, Type 2 acc. to EN 61643-11, For TN systems (230 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 2pa

Všeobecné poznámky týkající se produktů společnosti Pepperl+Fuchs

Rychlý odkaz

Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
phone +420 225 989 180

Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.