Nedostupné pro prodej
Vibration Limit Switch LVL-T1-G3S-E5PG-NA-EMS
- Level limit switch for liquids
- Process connection G1A
- Rugged stainless steel housing
- External test option using test magnet
- Due to its compact construction, it can be directly connected to a miniature contactor, magnet operated valve or programmable logic control (PLC)
- Highly visible status LEDs
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Výňatek z katalogového listu: Technická data LVL-T1-G3S-E5PG-NA-EMS
| Application | ||
|---|---|---|
| Description | level limit switch for application in storage tank, stirring container and pipeline with liquids | |
| Auxiliary energy | ||
| Electrical connection | output E5: Should be used in conjunction with programmable logic controllers (PLC), positive signal on the sensor switch output (PNP). The protective circuit is implemented in the connection. |
|
| Supply voltage | 10 ... 55 V DC | |
| Current consumption | < 15 mA | |
| Measurement accuracy | ||
| Hysteresis | approx. 4 mm with vertical mounting | |
| Operating conditions | ||
| Installation conditions | ||
| Installation position | any position , see section mounting position | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Process conditions | ||
| Medium temperature | -40 ... 150 °C (-40 ... 302 °F) | |
| Process pressure (static pressure) | -1 ... 40 bar (-14.5 ... 580.2 psi) | |
| Density | min. 0.7 g/cm3 | |
| Viscosity | max. 10000 mm2/s (10000 cSt) | |
| Mechanical specifications | ||
| Degree of protection | IP65/IP67 with connector (PG11 cable gland) | |
| Mechanical construction | ||
| Mass | approx. 450 g | |
| Material | process connection and vibration fork: stainless steel 1.4571/316Ti housing: stainless steel 1.4404/316L housing cover: PPSU connector: PA plug seal: Elastomer flat seal ring for process connection G1A: elastomer fibre, asbestos-free, unaffected by oils, solvents, vapour, weak acids and alkalis |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27200518 |
| ECLASS 12.0 | 27200518 |
| ECLASS 11.0 | 27200518 |
| ECLASS 10.0.1 | 27200518 |
| ECLASS 9.0 | 27200589 |
| ECLASS 8.0 | 27200589 |
| ECLASS 5.1 | 27200589 |
| ETIM 9.0 | EC001447 |
| ETIM 8.0 | EC001447 |
| ETIM 7.0 | EC001447 |
| ETIM 6.0 | EC001447 |
| ETIM 5.0 | EC001447 |
| UNSPSC 12.1 | 41111950 |
Details: LVL-T1-G3S-E5PG-NA-EMS
Product Documentation: LVL-T1-G3S-E5PG-NA-EMS
| Brief Instructions | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| KA035O, brief instructions LVL-T1 / KA035O Kurzanleitung LVL-T1 | ALL | 322 KB |
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.