Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
General specifications | ||
---|---|---|
Detection type | photoelectric sampling | |
Pulse count | max. 2500 | |
Functional safety related parameters | ||
MTTFd | 140 a | |
L10 | 50 E+9 at 1750 rpm | |
Diagnostic Coverage (DC) | 0 % | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC or 5 V DC ± 5 % (see "Output circuit" in the ordering information) | |
No-load supply current | max. 70 mA | |
Output | ||
Output type | push-pull, incremental or RS 422, incremental (see "Output circuit" in the ordering information) |
|
Voltage drop | < 2.5 V (push-pull, incremental) | |
Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental) max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS 422, incremental) |
|
Output frequency | max. 200 kHz | |
Rise time | 600 ns | |
De-energized delay | 600 ns | |
Connection | ||
Connector | M23 connector, 12-pin , clockwise rotation M23 connector, 12-pin , counter clockwise rotation |
|
Cable | ∅7,5 mm, 6 x 2 x 0,14 mm2 | |
Terminal compartment | Cable duct for cable diameter ∅4 mm ... 13 mm | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP66, IP67 or IP69K | |
Climatic testing | DIN EN 60068-2-78 , no moisture condensation | |
Emitted interference | EN IEC 61000-6-4:2019 | |
Noise immunity | EN IEC 61000-6-2:2019 | |
Shock resistance | DIN EN 60068-2-27, 200 g, 6 ms | |
Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz | |
Ambient conditions | ||
Operating temperature | -40 ... 80 °C (-40 ... 176 °F) cable, fixed installation | |
Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
Mechanical specifications | ||
Material | ||
Housing | 3.2315 aluminum | |
Flange | 3.2315 aluminum | |
Shaft | Stainless steel 1.4305 / AISI 303 | |
Mass | approx. 2200 g | |
Rotational speed | max. 3000 min -1 | |
Starting torque | ≤ 20 Ncm | |
Shaft insulation | max. 2.5 kV (for dielectric strength version) | |
Shaft load | ||
Axial | ≤ 300 N | |
Radial | ≤ 400 N | |
Angle offset | 1 ° | |
Axial offset | max. 1 mm | |
Dimensions | ||
Length | 90 mm | |
Diameter | 110 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27270501 |
ECLASS 12.0 | 27270501 |
ECLASS 11.0 | 27270501 |
ECLASS 10.0.1 | 27270501 |
ECLASS 9.0 | 27270501 |
ECLASS 8.0 | 27270501 |
ECLASS 5.1 | 27270501 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Brief Instructions | Jazyk | Typ souboru | Velikost souboru |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 288 KB | |
Manuals | |||
Manual ENI11HD | ENG | 3867 KB |
CAD | Jazyk | Typ souboru | Velikost souboru |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 260 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAD Portal / CAD Portal | ALL | LINK | --- |
Certificates | Číslo certifikátu | Jazyk | Typ souboru | Velikost souboru |
---|---|---|---|---|
US CA UL | CoC 20190913-E223176 RptRef E223176-20081013 | ALL | 280 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0893C | ALL | 321 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7160 | ALL | 246 KB |