Advanced Diagnostic Gateway KT-MB-GT2AD

System integration kit for Advanced Diagnostics
PCS integration via Ethernet
Simple automatic setup of Advanced Diagnostics
Common alarm handling
For FOUNDATION Fieldbus and PROFIBUS PA

Technical Data
Informative Literature
Productos asociados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Descargue la hoja de datos completa en PDF:

Extracto de la hoja de datos: Información técnica del KT-MB-GT2AD

Supply
Rated voltage		19.2 ... 35 V DC
Rated current		160 ... 90 mA
Power dissipation		3 W
Ethernet Interface
Port		100 BASE-TX
Protocol		TCP/IP and UDP/IP
Services		ICMP , DHCP , AutoIP , HTTP
Connection type		RJ-45 socket, 8-pin
Transfer rate		100 MBit/s
Diagnostic Bus
Number of Diagnostic Bus Channels		2
Type		RS-485
Number of Diagnostic Modules/Channel		31
Termination		integrated
Cable length/Channel		30 m
Indicators/operating means
LED ERR		red: Hardware fault
LED PWR		green: Power on
LINK/ACT		yellow
CH1, CH2		yellow: bus activity
Galvanic isolation
All circuits/FE		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Ethernet/Diagnostic Bus		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Ethernet/Supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Diagnostic Bus/Supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Diagnostic Bus/Diagnostic Bus		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Directive conformity
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Low voltage
	Directive 73/23/EEC	EN 50178 (identical to EN 62103)
Standard conformity
Galvanic isolation		IEC 62103
Degree of protection		IEC 60529
Climatic conditions		DIN IEC 721
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ethernet		IEEE 802.3
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Housing material		Polycarbonate
Degree of protection		IP20
Mass		250 g
Mounting		DIN rail mounting

Classifications

System	Classcode
ECLASS 13.0	27242610
ECLASS 12.0	27242610
ECLASS 11.0	27242610
ECLASS 10.0.1	27242610
ECLASS 9.0	27242610
ECLASS 8.0	27242610
ECLASS 5.1	27242610
ETIM 9.0	EC001600
ETIM 8.0	EC001600
ETIM 7.0	EC001600
ETIM 6.0	EC001600
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: KT-MB-GT2AD

Informative Literature: KT-MB-GT2AD

Literature	Idioma	Tipo de archivo	Tamaño
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB

Productos asociados: KT-MB-GT2AD

Accessory of

	HD2-DM-B Basic Diagnostic Module
	FieldConnex® Fieldbus, Basic diagnostic module, base module for fieldbus power hub physical layer diagnostics, Basic monitoring for power supply output and health, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

	HD2-DM-A.RO Advanced Diagnostic Module
	FieldConnex® Fieldbus, Advanced diagnostic module with relay output for fieldbus power hub physical layer diagnostics, Diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

	KT-MB-DMA Advanced Diagnostic Kit
	FieldConnex® Fieldbus, Advanced diagnostic kit for retrofitting advanced diagnostics, Comprehensive diagnostics for the fieldbus physical layer, Module and motherboard for retrofit of any installation, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, Europe, USA, Canadapa

Matching System Components

	HD2-DM-A Advanced Diagnostic Module
	FieldConnex® Fieldbus, Advanced diagnostic module, plug-in module for the fieldbus power hub, Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

Notas generales sobre la información de los productos de Pepperl+Fuchs

Enlaces directos

Ethernet-APL para industrias de procesos

Ethernet-APL permite una comunicación continua en todos los niveles jerárquicos. Obtenga más información sobre esta tecnología pionera…

Servicio de información RSS para actualizaciones de PANOS

Manténgase informado cuando se publique una nueva actualización de software de PANOS, el sistema operativo para conmutadores Ethernet-APL: Con nuestro canal RSS recibirá una notificación por correo electrónico en su bandeja de entrada inmediatamente después de que se haya publicado una nueva versión.

Bus de campo FieldConnex® así de fácil

Desde las decisiones a la planificación, instalación y puesta en marcha, hasta el funcionamiento y mantenimiento: descubra cómo sacar el máximo partido de su infraestructura de bus de campo…

Productos

Tecnología de bus de campo para zona segura o cualquier área peligrosa

Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
phone +49 621 776-0

Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.