Línea de servicio de Sensores Industriales
Atención al cliente para protección contra explosiones
Surge Protector FS-LBAS-IA1
FieldConnex®
- For Ethernet-APL spur ports
- Intrinsically safe according to 2-WISE
- Stainless steel housing for field device mounting, ISO 20 mm thread
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del FS-LBAS-IA1
| Descripción del producto |
|---|
| Surge protector, Ethernet-APL, field mounting, Ex ia, Ex d, Ex e, 20 mm ISO thread |
| General specifications | ||
|---|---|---|
| Design / Mounting | Outside installation | |
| Installation in hazardous area | Zone 1 | |
| Ethernet Interface | ||
| Interface type | Ethernet-APL auxiliary device | |
| Electrical specifications | ||
| Rated voltage | 30 V | |
| Rated current | 500 mA | |
| Impulse rating | 2 kV/1 kA (category C1) per line 5 kV/2,5 kA (category C2) per line 0,5 kA (category D1) per line |
|
| Impulse discharge current (10/350 µs) | 0.5 kA per line | |
| Nominal discharge current (8/20 µs) | ||
| per line | 2.5 kA | |
| total | 5 kA | |
| Max. surge current (8/20 µs) | 5 kA overstressed fault mode 1 acc. to IEC 61643-21 | |
| Voltage protection level | ||
| Line/Earth | max. 1800 V C1 , 1 kA per line max. 2100 V C2 , 2.5 kA per line max. 50 V C3 , 50 A per line max. 1400 V B2 , 50 A per line |
|
| Standard conformity | ||
| Degree of protection | IEC/EN 60529 | |
| Climatic conditions | IEC 60721 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Surge protection | IEC 61643-21 | |
| Ethernet | Ethernet-APL , IEEE 802.3 for 10BASE-T1L |
|
| Ambient conditions | ||
| Ambient temperature | -50 ... 80 °C (-58 ... 176 °F) | |
| Storage temperature | -50 ... 90 °C (-58 ... 194 °F) | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Mechanical specifications | ||
| Connection type | wire ends APL + red , APL - black , protective conductor (PE) green/yellow |
|
| Core cross section | APL +, APL - 0.8 mm2 , PE 1.3 mm2 |
|
| Housing material | Stainless steel 1.4401/316 | |
| Degree of protection | IP67 | |
| Mass | 200 g | |
| Mounting | ISO 20 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | TÜV 22 ATEX 8786 X | |
| Marking | 2-WISE auxiliary device | |
| Marking |  ll 2 (1) G Ex ia [ia Ga] IIC T6 Gb , ll 2 (1) D Ex ia [ia Da] lIIC T80°C Db , l M2 (M1) Ex ia [ia Ma] l Mb , ll 2 G Ex db eb mb IIC T6 Gb , l M2 Ex eb mb I Mb , lI 2 (1) G Ex db [ia Ga] IIC T6 Gb |
|
| Voltage | 30 V | |
| Current | 500 mA | |
| Internal capacitance | negligible 0 nF | |
| Internal inductance | negligible 0 µH | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-1:2014 , IEC TS 60079-47:2021 |
|
| International approvals | ||
| IECEx approval | IECEx TUR 22.0017X | |
| Approved for | Ex ia [ia Ga] IIC T6 Gb , Ex ia [ia Da] lIIC T80°C Db , Ex ia [ia Ma] l Mb , Ex db eb mb IIC T6 Gb , Ex db eb mb I Mb , Ex db [ia Ga] IIC T6 Gb |
|
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27171202 |
| ECLASS 12.0 | 27171202 |
| ECLASS 11.0 | 27130805 |
| ECLASS 10.0.1 | 27130805 |
| ECLASS 9.0 | 27130805 |
| ECLASS 8.0 | 27130805 |
| ECLASS 5.1 | 27130801 |
| ETIM 9.0 | EC000941 |
| ETIM 8.0 | EC000941 |
| ETIM 7.0 | EC000941 |
| ETIM 6.0 | EC000941 |
| ETIM 5.0 | EC000941 |
| UNSPSC 12.1 | 39121610 |
Details: FS-LBAS-IA1
Product Documentation: FS-LBAS-IA1
| Safety and Security Documentation | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Manual de instrucciones | SPA | 166 KB | |
| Manuals | |||
| Manual | ENG | 1648 KB | |
Design / Simulation: FS-LBAS-IA1
| CAD | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 102 KB |
Approvals: FS-LBAS-IA1
| Certificates | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| China SITIIAS CCC Ex Certificate | 2022322304004748 (Singapore) | ALL | 1107 KB | |
| Europe TUV Rheinland ATEX Certificate Surge Protective Device ATEX Category 2 (1) | TÜV 22 ATEX 8786 X | ALL | 1538 KB | |
| Worldwide TUV Rheinland Surge Protective Device IECEx Certificate of Conformity | IECEx TUR 22.0017X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-5857_SPA | SPA | 174 KB | |
Ethernet-APL permite una comunicación continua en todos los niveles jerárquicos. Obtenga más información sobre esta tecnología pionera…
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 Todos los derechos reservados
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.