Splice sensor UGB-18GM50-255-2E3-150MM-V15-Y
- Ultrasonic system for splice detection
- Sensor with mounting bracket, preassembled
- Insensitive to printing, colors, and shining surfaces
- Very high processing speeds are possible.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok UGB-18GM50-255-2E3-150MM-V15-Y
| General specifications | ||
|---|---|---|
| Sensing range | 20 ... 60 mm , optimal distance: 45 mm | |
| Transducer frequency | 255 kHz | |
| Indicators/operating means | ||
| LED green | Display: readiness | |
| LED yellow | Display: splice detected | |
| LED red | indication: no sheet detected (Air) | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC , ripple 10 %SS | |
| No-load supply current | < 60 mA | |
| Time delay before availability | < 500 ms | |
| Input | ||
| Input type | Teach-In input 0-level: -UB ... -UB + 1V 1-level: +UB - 1 V ... +UB |
|
| Pulse length | ≥ 500 ms | |
| Impedance | ≥ 10 kΩ | |
| Output | ||
| Output type | 2 switch outputs PNP, NC | |
| Rated operating current | 2 x 100 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 3 V | |
| Switch-on delay | ≤ 600 µs | |
| Switch-off delay | ≤ 600 µs | |
| Pulse extension | ≥ 120 ms programmable | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | Cable connector M12 x 1 , 5-pin with PVC Cable, 150 mm | |
| Degree of protection | IP67 | |
| Material | ||
| Housing | nickel plated brass; plastic components: PBT | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Mass | 150 g | |
| Dimensions | ||
| Length | 53 mm | |
| Diameter | 18 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272801 |
| ECLASS 12.0 | 27272801 |
| ECLASS 11.0 | 27272801 |
| ECLASS 10.0.1 | 27272801 |
| ECLASS 9.0 | 27272801 |
| ECLASS 8.0 | 27272801 |
| ECLASS 5.1 | 27272801 |
| ETIM 9.0 | EC001847 |
| ETIM 8.0 | EC001847 |
| ETIM 7.0 | EC001847 |
| ETIM 6.0 | EC001847 |
| ETIM 5.0 | EC001847 |
| UNSPSC 12.1 | 41111960 |
Details: UGB-18GM50-255-2E3-150MM-V15-Y
Informative Literature: UGB-18GM50-255-2E3-150MM-V15-Y
| Literature | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Application Report - Reliable Detection for an Uninterrupted Packaging Process | ENG | 155 KB |
Product Documentation: UGB-18GM50-255-2E3-150MM-V15-Y
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 299 KB | |
| Safety and Security Documentation | |||
| Használati útmutató | HUN | 147 KB | |
Approvals: UGB-18GM50-255-2E3-150MM-V15-Y
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3 | ALL | 1806 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-7232 | ALL | 157 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7233 | ALL | 155 KB | |
Kapcsolódó termékek: UGB-18GM50-255-2E3-150MM-V15-Y
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
A Pepperl+Fuchs különféle letölthető dokumentumokat biztosít Önnek az ultrahangos érzékelőkkel kapcsolatban.
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.