Cable pull rotary encoder ECA10TL - Analog
- Solid yet lightweight plastic construction
- Compact, slim design (the shaft of the mounted rotary encoder is used to provide the function of the drum bearing)
- Coupling-free adaptation
- Wide range of mounting options
- Rust and acid-resistant measuring cable
- Very high level of linearity and repeatability
- Adjustable measuring range via push buttons
- Analog current and voltage output
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok ECA10TL - Analog
| Termék leírása |
|---|
| Cable pull rotary encoder with analog interface and push buttons |
| General specifications | ||
|---|---|---|
| Detection type | magnetic sampling | |
| Device type | Target line with analog interface | |
| Measuring length | 3000 ... 10000 mm | |
| Construction type | 80 mm, 130 mm, 190 mm | |
| Resolution | Cable pull: 80 mm design: 0,028 mm 130 mm design: 0,047 mm 190 mm design: 0,068 mm Encoder: 17 bit (13 bit/revolution) |
|
| Electrical specifications | ||
| Operating voltage | 8 ... 32 V DC | |
| Current consumption | typ. 15 mA (with voltage output) typ. 20 mA (with current output) |
|
| Input 1 | ||
| Input type | lower limit of measuring range | |
| Signal voltage | ||
| High | 8 ... 32 V DC | |
| Signal duration | min. 1 s | |
| Input 2 | ||
| Input type | upper limit of measuring range | |
| Signal voltage | ||
| High | 8 ... 32 V DC | |
| Signal duration | min. 1 s | |
| Analog output | ||
| Output type | analog voltage output or analog current output | |
| Default setting | rising ramp at ccw rotation | |
| Linearity error | ≤ 0.15 % | |
| Connection | ||
| Connector | M12 connector, 5 pin | |
| Cable | ∅6 mm, 4 x 2 x 0.14 mm2, 1 m | |
| Standard conformity | ||
| Degree of protection | acc. DIN EN 60529 | |
| Connection side | cable models: IP54 connector models: IP65 Cable pull: IP50 |
|
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Operating temperature | cable, movable installation: -5 ... 70 °C (23 ... 158 °F) cable, fixed installation: -30 ... 70 °C (-22 ... 158 °F) connector models: -30 ... 70 °C (-22 ... 158 °F) |
|
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | 98 % , no moisture condensation | |
| Mechanical specifications | ||
| Rope diameter | 0.55 mm | |
| Material | ||
| Housing | nickel-plated steel | |
| Cable pull | design 80/130 : Luranyl® or Lexan 920 design 190 : ABS-GF17 |
|
| Flange | Aluminum | |
| Rope | Stainless steel 1.4401/316 | |
| Life span | up to 106 Cycles | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270503 |
| ECLASS 12.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 10.0.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 5.1 | 27270502 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details: ECA10TL - Analog
Function
Lighter and more solid cable pull rotary encoder with flat housing design.
Informative Literature: ECA10TL - Analog
| Literature | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Application Report - Linear Position Measurement for Pipe Handlers on Offshore Oil Rigs | ENG | 328 KB | |
| Application Report - Precise Heigh Measurement with Autonomous Forklifts | ENG | 191 KB |
Product Documentation: ECA10TL - Analog
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 5459 KB | |
| Manuals | |||
| Manual EC*SL*, Cable-Pull | ENG | 3917 KB | |
Approvals: ECA10TL - Analog
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| US CA UL | CoC 20190913-E223176 RptRef E223176-20081013 | ALL | 280 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0924C | ALL | 323 KB | |
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.