Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Termék leírása |
---|
Bearing box for offshore applications, shaft ∅12x20 with flat area, max. rotational speed 6000 min-1 |
Standard conformity | ||
---|---|---|
Degree of protection | DIN EN 60529, IP65 , IP66 | |
Climatic testing | ||
Static climatic testing | DIN EN 60068-2-78 , no moisture condensation | |
Cyclic climatic testing | DIN EN 60068-2-30 55 °C, 6 cycles | |
Salt spray test | DIN EN 60068-2-52 , 672 h | |
Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
Ambient conditions | ||
Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Storage temperature | -40 ... 95 °C (-40 ... 203 °F) | |
Mechanical specifications | ||
Shaft dimensions | 10 x 20 mm with flat area 1 mm | |
Material | ||
Housing | aluminum, coated, salt water resistant | |
Flange | aluminum, coated, salt water resistant | |
Shaft | stainless steel 1.4404 / AISI 316L | |
Mass | approx. 425 g | |
Rotational speed | max. 6000 min -1 | |
Starting torque | ≤ 10 Ncm | |
Shaft load | ||
Axial | 200 N | |
Radial | 350 N | |
Life span | 3 x 109 @ 3000 min-1 |
System | Classcode |
---|---|
ECLASS 13.0 | 27270592 |
ECLASS 12.0 | 27270592 |
ECLASS 11.0 | 27270592 |
ECLASS 10.0.1 | 27270592 |
ECLASS 9.0 | 27270592 |
ECLASS 8.0 | 27279103 |
ECLASS 5.1 | 27270591 |
ETIM 9.0 | EC003015 |
ETIM 8.0 | EC003015 |
ETIM 7.0 | EC003015 |
ETIM 6.0 | EC003015 |
ETIM 5.0 | EC003015 |
UNSPSC 12.1 | 23153016 |
The bearing unit is particularly suited for applications where high rotational speeds and large shaft loads can occur. Here the shaft loads are fully taken up by the bearing unit and kept away from the rotary encoder. Ball bearing grease with specially adjusted additivation increases the service life in the event of vibrations, and ensures good distribution of the grease and oil separation. This results in low frictional resistance and self-heating.
The bearing unit is suitable for rotary encoders with Ø12 mm x 20 mm recessed hollow shaft and torque rest, e.g., rotary encoders from the RSI58, ASM58 or ENI58IL-R series.
CAD | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 507 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |