Signal Conditioner: If You Need a High Signal Quality

As a result of many years of research and development with our customers, a wide range of signal conditioner versions are available on the market. They are all based on the principle of galvanic isolation, but can be extended by additional functionalities depending on the application. This diversity has proven its worth in practice - rely on these K-System modules, too.

The following features come with all signal conditioners due to their galvanic isolation:

• Protection of the measuring and control signals against deviations
• Filtering of frequency interferences on the field side
• Avoidance of current compensations, which may happen when potentials are modified, e.g., when entry cards in the control system have been exchanged

Additional Options
Frequently, you have to multiply signals. Pepperl+Fuchs also offers signal conditioners with a signal splitter function to double input signals. The signals can be used independently by more than one system at the same time. This allows you to connect more than one control system in series without risking a complete failure of all systems. Additionally, sending two independent output signals means connecting two loads in series. This also eliminates the risk of a high electrical load.

Furthermore, signal conditioners from Pepperl+Fuchs are available with more functions:

• Signal linearization
• Signal adaptation, i.e., conversion of a signal amplitude part to a standard signal
• Trip value or slip monitoring

With our signal condtioners, you optimize your process control and increase plant availability. Simply contact us!