Current/Voltage Converter KFD0-CC-1

1-channel signal conditioner
24 V DC supply (loop powered)
Current or voltage input
Output: 4 ... 20 mA
Potentiometer or DIP switch selectable ranges
Line fault detection (LFD)

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
関連製品
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ KFD0-CC-1

General specifications
Signal type		Analog input
Supply
Rated voltage		12 ... 35 V DC loop powered
Power dissipation		0.4 W
Input
Connection side		field side
Connection		terminals 1+, 2-
Current range		0 ... 20 mA , load ≤ 50 Ω
Voltage range		0 ... 10 V , load ≥ 100 kΩ
Output
Connection side		control side
Connection		terminals 9+, 8-
Load		(U -12 V) / 0.02 A
Current output		4 ... 20 mA , limited to ≤ 35 mA
Fault signal		downscaling ≤ 3 mA
Transfer characteristics
Deviation
	After calibration	0.1 % of full-scale value
	Temperature effect	span: 0.050 % of span /K ; zero point: 0.060 % of span /K
	Linearization	≤ 0.04 % of full-scale value
	Influence of supply voltage	6.5 ppm/V
Rise time		250 ms
Galvanic isolation
Input/Output		safe isolation according to EN 50178, rated insulation voltage 253 V_eff
Indicators/settings
Control elements		DIP switch potentiometer
Configuration		via DIP switches via potentiometer
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Insulation coordination		EN 50178
Galvanic isolation		EN 50178
Degree of protection		IEC 60529
Ambient conditions
Ambient temperature		-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 100 g
Dimensions		20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
	Height	107 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210107
ECLASS 12.0	27210107
ECLASS 11.0	27210107
ECLASS 10.0.1	27210107
ECLASS 9.0	27210107
ECLASS 8.0	27210107
ECLASS 5.1	27210107
ETIM 9.0	EC002475
ETIM 8.0	EC002475
ETIM 7.0	EC002475
ETIM 6.0	EC002475
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFD0-CC-1

Informative Literature: KFD0-CC-1

Literature	言語	ファイルタイプ	ファイルサイズ
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB

Product Documentation: KFD0-CC-1

Safety and Security Documentation	言語	ファイルタイプ	ファイルサイズ
Instruction manual	ENG	PDF	41 KB
Manuals
System Manual	ENG	PDF	3694 KB

Design / Simulation: KFD0-CC-1

CAD	言語	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	ALL	STP	105 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	939 KB

Approvals: KFD0-CC-1

Declaration of Conformity	認証番号	言語	ファイルタイプ	ファイルサイズ
ACMA Suppliers Declaration of Conformity / ACMA-Konformitätserklärung des Lieferanten	DOC-3038A	ALL	PDF	100 KB

関連製品: KFD0-CC-1

Matching System Components

	K-DUCT-GY Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of field and control signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

クイックリンク

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.