HART Termination Board HiSHPSM/32/TB-02

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ HiSHPSM/32/TB-02

Supply
Nominal voltage		24 V DC
Fusing		100 mA , 5 x 20 mm (0.2 x 0.8 inch)
Power dissipation		0.7 W , with Multiplexer
Reverse polarity protection		yes
HART signal channels (intrinsically safe)
HART signal channels
	Number of channels	32 unbalanced signal loops
Interface
Type/number		2 x RS-485
Redundancy
Supply		yes
Galvanic isolation
HART signal channels		30 V DC
Ambient conditions
Ambient temperature		-20 ... 55 °C (-4 ... 131 °F)
Relative humidity		5 ... 90 %, non-condensing
Mechanical specifications
Core cross section		2.5 mm² (16 AWG)
Connection		field side: screw terminals control side: screw terminals/Sub-D socket 2 x 37-pin RS 485 interface: removable screw terminals power: removable screw terminals
Mass		approx. 700 g
Dimensions		300 x 127 x 186 mm (11.8 x 5 x 7.3 inch) (W x H x D) , depth including module assembly with HiDMux2700
	Height	127 mm
	Width	300 mm
	Depth	186 mm
Mounting		DIN rail mounting
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Manuals	言語	ファイルタイプ	ファイルサイズ
Manual DTM description HiDMux2700	ENG	PDF	2278 KB
Manual HiDMux2700	ENG	PDF	8581 KB

Declaration of Conformity	認証番号	言語	ファイルタイプ	ファイルサイズ
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-B046C	ALL	PDF	41 KB
UKCA-Declaration of conformity / UKCA-Konformitätserklärung	DOC-B0G2	ALL	PDF	39 KB

Accessory of

	HiDMux2700 HART Multiplexer
	32-channel, 24 V DC supply, HART field device input (revision 5 to 7), RS-485 interface, Up to SIL 3 acc. to IEC/EN 61508pa