General specifications |
Signal type | Analog output |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 2 |
Supply |
Connection | Power Rail or terminals 9+, 10- |
Rated voltage | 19 ... 30 V DC |
Ripple | ≤ 10 % |
Rated current | ≤ 30 mA at 24 V |
Power dissipation | ≤ 600 mW at 20 mA and 500 Ω load |
Power consumption | ≤ 700 mW |
Input |
Connection side | control side |
Connection | terminals 5-, 6+ |
Input signal | 4 ... 20 mA , limited to approx. 26 mA |
Input voltage | open loop voltage of the control system < 30 V |
Voltage drop | approx. 6 V at 20 mA |
Input resistance | > 100 kΩ, with field wiring open |
Output |
Connection side | field side |
Connection | terminals 1+, 2- |
Voltage | ≥ 18 V at 20 mA |
Current | 4 ... 20 mA |
Load | 0 ... 900 Ω |
Ripple | 20 mV rms |
Transfer characteristics |
Deviation | at 20 °C (68 °F), 4 ... 20 mA < 0.1 % of full scale, incl. non-linearity and hysteresis |
| Influence of ambient temperature | < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) |
Frequency range | bandwidth at 0.5 Vss signal 0 ... 3 kHz (-3 dB)
|
Rise time | 10 to 90 % ≤ 10 ms |
Galvanic isolation |
Input/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Input/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Indicators/settings |
Display elements | LED |
Labeling | space for labeling at the front |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Conformity |
Electromagnetic compatibility | NE 21:2017 EN 61326-3-2:2018 |
Degree of protection | IEC 60529 |
Ambient conditions |
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Connection | spring terminals |
Mass | approx. 100 g |
Dimensions | 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2 |
| Height | 124 mm |
| Width | 12.5 mm |
| Depth | 114 mm |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |